• 한국세라믹학회지
• /
• 제38권12호
• /
• pp.1123-1131
• /
• 2001

재활용 $Al_2$O$_3$분말인 구조재료용 $Al_2$O$_3$세라믹스의 분쇄분말과 폐Al$_2$O$_3$흡착제의 첨가량과 입경에 따른 재생 $Al_2$O$_3$세라믹스의 소결특성을 조사하였다. 1,$650^{\circ}C$에서 5시간 소결한 순수 $Al_2$O$_3$시편을 급랭하여 분쇄한 -40과 +40$\mu$m의 $Al_2$O$_3$분말과 폐Al$_2$O$_3$흡착제를 순수한 $Al_2$O$_3$분말에 10~50wt% 첨가한 후, 재소결하여 재생 $Al_2$O$_3$세라믹스를 제조하였다. 재활용 $Al_2$O$_3$분말의 첨가량과 입경에 관계없이 소결온도가 증가함에 따라 시편의 밀도와 3점곡강도는 증가하였으나, 동일 소결온도에서는 재활용 $Al_2$O$_3$분말의 첨가량이 증가함에 따라 밀도와 3점곡강도는 감소하였다. ~30wt%의 $Al_2$O$_3$분쇄분말(-40$\mu$m), ~20wt%의 $Al_2$O$_3$분쇄분말(+40$\mu$m) 및 10wt%의 폐Al$_2$O$_3$흡착제를 첨가한 시편의 3점곡강도는 200MPa 이상이었다. 재생 $Al_2$O$_3$시편의 치밀화를 위하여 5~20wt%의 폐유리분말을 첨가하여 1200~1$650^{\circ}C$에서 5시간 소결한 시편은 폐유리분말의 첨가량이 증가함에 따라 최대 밀도와 3점곡강도를 나타내는 온도는 감소하였으나, 140$0^{\circ}C$이상에서는 페유리분말을 첨가하지 않은 시편에 비하여 밀도와 3점곡강도가 감소하여 재생 $Al_2$O$_3$세라믹스의 소결성 향상에는 기여하지 못하였다.

• 한국세라믹학회지
• /
• 제35권12호
• /
• pp.1266-1273
• /
• 1998

Al2O3/(5~20vol%)LaAl11O18 composites in which the second phase was dispersed with a elongated grain shape were fabricated using Al2O3 and La2O3 composition by hot-pressing. In order investigate the in-fluence of LaAl11O18 on the toughening of LaAl11O18 on the toughening of Al2O3 matrix composites AE(acoustic emission) analysis was con-ducted together with an evaluation of fracture toughness using of SEPB technique. The degree of AE events occurred in composites were more than those in monolithic alumina. The occurrences of AE event increased with increasing the amount of LaAl11O18 phase in the Al2O3/LaAl11O18 composite is two times higher compared to monolithic alu-mina. The main toughening mechanism was attributed to the bridging of LaAl11O18 grains at tip of pro-pagating crack.

• 한국전기전자재료학회논문지
• /
• 제30권1호
• /
• pp.7-12
• /
• 2017

3YSZ + (x) $Al_2O_3$ composites (x = 20, 40, 60, 80 wt%) were fabricated and the influences of particle sizes of $Al_2O_3$ on their microstructures and mechanical properties were investigated with XRD, SEM, vickers hardness and fracture toughness. $Al_2O_3$-3YSZ composites containing $Al_2O_3$ powder of a $0.3{\mu}m$ and an $1.0{\mu}m$, which are here in after named as $Al_2O_3$($0.3{\mu}m$)-3YSZ and $Al_2O_3$($1.0{\mu}m$)-3YSZ, respectively, were made by mixing raw materials, uni-axial pressing and sintering at $1,400^{\circ}C$, $1,500^{\circ}C$, and $1,600^{\circ}C$. $Al_2O_3$($0.3{\mu}m$)-3YSZ composites show the higher density and the better mechanical properties than $Al_2O_3$($1.0{\mu}m$)-3YSZ composites. The Vickers hardness of the $Al_2O_3$($0.3{\mu}m$)-3YSZ composites show a peak value of 1,997 Hv at the content of 60 wt% $Al_2O_3$, which is a slightly higher value in comparison with 1,938 Hv of the $Al_2O_3$($1.0{\mu}m$)-3YSZ composite. However, the fracture toughness of $Al_2O_3$-3YSZ composites monotonically increases with decreasing the content of $Al_2O_3$ without any peak values. $Al_2O_3$($0.3{\mu}m$)-3YSZ and $Al_2O_3$($1.0{\mu}m$)-3YSZ composites sintered at $1,600^{\circ}C$ have a maximum value of a $6.9MPa{\cdot}m^{1/2}$ and a $6.2MPa{\cdot}m^{1/2}$, respectively at the composition of containing 20 wt% $Al_2O_3$. It should be noticed that the mechanical properties and the sintering density of the $Al_2O_3$-3YSZ composites can be enhanced by using more fine $Al_2O_3$ powder due to their denser microstructure and smaller grain size.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.170-171
• /
• 2012

$Fe_2O_3$, Al, Cr과 Si 분말을 고 에너지 볼 밀링해서 나노분말을 제조한 후 고주파유도 가열 활성 연소합성 장치로 1분 이내의 짧은 시간에 합성 및 소결한 $Al_2O_3+4.65(Fe_{0.43}Cr_{0.17}Al_{0.323}Si_{0.077})$, $Al_2O_3$ + 5.33 ($Fe_{0.375}Cr_{0.11}Al_{0.3}Si_{0.075}$), $Al_2O_3$ + 6.15 ($Fe_{0.325}Cr_{0.155}Al_{0.448}Si_{0.072}$), $Al_2O_3$ + 3.3 ($Fe_{0.6}Cr_{0.3}Al_{0.6}$) 소결체 시편을 $700^{\circ}C$의 온도에서 100시간 동안 공기 중에서 산화 및 $N_2-H_20-H_2S$ 혼합 가스 내에서 황화 부식을 실시하였다. 그 결과 산화 및 황화 부식 후에 ${\alpha}-Al_2O_3$가 표면에 생성되어 보호 피막으로 작용하여 우수한 내식성을 보였다.

• 한국분말재료학회지
• /
• 제10권2호
• /
• pp.97-102
• /
• 2003

The powder-in sheath rolling was applied to the fabrication of $Al/Al_2O_3$ composite. A stainless steel tube with outer diameter of 12 mm and wall thickness of 1 mm was used as a sheath. Mixture of aluminum powder and $Al/Al_2O_3$ particles of which volume content was varied from 5 to 20 vol.% was filled in the tube by tap filling and then rolled to 75% reduction at ambient temperature. The re]]ed specimen was sintered at 56$0^{\circ}C$ for 0.5 hr. The $Al/Al_2O_3$ composite fabricated by the sheath rolling and subsequent sintering showed the relative density higher than 0.96. The tensile strength of the composite increased with the volume content of $Al_2O_3$ particles, and it reached a maximum of 90 MPa which is 1.5 times higher than unreinforced material. The elongation decreased with the volume content of $Al_2O_3$ particles. It is concluded that the powder-in sheath rolling is an effective method for fabrication of $Al/Al_2O_3$ composite.

• 한국세라믹학회지
• /
• 제38권3호
• /
• pp.225-230
• /
• 2001

저전압용 형광체로 주목받고 있는 SrTiO$_3$:Pr,Al 형광체를 고상반응법으로 제조하였다. 부활성체 Al이 23 mol% 첨가되었을 때 SrTiO$_3$:Pr 형광체는 최대 발광 강도를 보여주었다. 최대 발광 강도를 보인 형광체에 대해 제한시야회절상과 투과전자현미경을 이용하여 SrTiO$_3$:Pr,Al 적색 형광체내 2차상 형성에 대한 연구를 행하였고 또한 에너지 분산 분광 분석을 행하여 SrTiO$_3$:Pr,Al 형광체내 주입된 부활성제 Al의 함량을 결정하였다. 제한시야회절상의 결과에 의하면 SrTiO$_3$:Pr,Al 적색 형광체내에 단사정 SrAl$_2$O$_4$, 삼사정 Ti$_4$O$_{7}$, 육방정 SrAl$_{12}$O$_{19}$가 2차상으로 존재함을 보여 주었다. 에너지 분산 분광 분석 결과 부활성제 Al의 함량 중 일부는 SrTiO$_3$:Pr,Al 적색 형광체 격자에 고용되고 일부 Al은 SrAl$_{12}$O$_{19}$와 SrAl$_2$O$_4$의 2차상을 형성하는데 소모됨을 보여주었다.주었다.

• 한국세라믹학회지
• /
• 제26권4호
• /
• pp.453-458
• /
• 1989

Aluminum nitride powder prepared from the hydroxides, AlOOH and Al(OH)3 which were obtained by hydrolysis of Al-isopropoxide, was densified at 1750 and 180$0^{\circ}C$ for 60 min by hot-pressing under the pressure of 25kg/$\textrm{cm}^2$. Theoretical density could be obtained at 175$0^{\circ}C$. Their flexural strengths were 450MPa and 395MPa for the specimens obtained from Al(OH)3 and AlOOH, respectively. There was no remarkable change in flexural strength up to 100$0^{\circ}C$. Fracture toughness values were 3.50MN/m3/2 for Al(OH)3 and 3.11MN/m3/2 for AlOOH. It is assumed that these differences in mechanical properties are due to the abnormal grain growth for the AlN ceramics obtained from AlOOH.

• 한국세라믹학회지
• /
• 제39권3호
• /
• pp.315-320
• /
• 2002

저농도로 희석된 HF 수용액(6 wt%)을 사용하여 $Al(OH)_3$의 표면을 F/Al의 몰비 0.15에서 처리하고, 처리 전후 표면특성을 관찰하였다. 반응계의 온도 및 pH 변화로부터 $Al(OH)_3$에 대한 HF의 표면반응은 HF와 접촉한 $Al(OH)_3$ 표면부에서 metastable한 ${\alpha}$형의 불화알루미늄$({\alpha}-AlF_3{\cdot}3H_2O)$이 안정한 ${\beta}$형의 불화알루미늄$({\beta}-AlF_3{\cdot}3H_2O)$으로 전이되는 과정으로 진행되며, 다량의 발열을 수반하면서 반응계의 온도상승을 유발하였다. 이러한 ${\beta}-AlF_3{\cdot}3H_2O$의 생성은 표면처리된 분말의 FT-IR 및 X-선 회절분석결과를 통해 확인되었다. ${\beta}-AlF_3{\cdot}3H_2O$의 morphology와 분포상태를 SEM을 통해 관찰한 결과 $Al(OH)_3$ 표면에 $1{\mu}m$ 이하의 미세분말 형태로 피복층을 형성하며 균일하게 분포된 것으로 확인되었다. HF로 처리된 시료의 표면 백색도는 미처리에 비해 약 6.6% 증가되었으며, 이는 $Al(OH)_3$보다 높은 백색도를 지닌 ${\beta}-AlF_3{\cdot}3H_2O$ 피복 효과 때문인 것으로 나타났다.

• 한국세라믹학회지
• /
• 제26권1호
• /
• pp.31-36
• /
• 1989

In order to synthesize AlN-polytypes from AlN-SiO2-Al2O3 system, composition A (AlN/SiO2/Al2O3=1/0.3/0.05, mole ratio) and composition B(AlN-SiO2-Al2O3=1/0.2/0.05, mole ratio) were used. AlN-polytypes were produced by nitriding the mixture at 175$0^{\circ}C$~190$0^{\circ}C$ under N2 atmosphere. For lower reaction temperature, 15R phase was produced and in the case of higher reaction temperature, AlN phase was only produced. As each composition was heated at 185$0^{\circ}C$ in N2 atmosphere, produced main phases were 15R phase for composition A and 21R phase for composition B respectively. The fracture surfaces of produced reactants showed porous skeleton structure.

• 한국재료학회지
• /
• 제11권12호
• /
• pp.1080-1085
• /
• 2001

Dielectric properties and leakage current characteristics of 100 nm-thick $Ta_2O_5/Al_2O_3$multilayer thin films, which were fabricated by reactive sputtering of$Al_2O_3$and$Ta_2O_5$ successively on top of each other for total 9 layers, have been investigated with variation of the$Al_2O_3$content$(i.e,\;Ta_2O_5/Al_2O_3 \;thickness\;ratio)$.$Ta_2O_5/Al_2O_3$films were amorphous regardless of the$Al_2O_3$content. With increasing the$Al_2O_3$content from 0% to 100%, refractive index of the $Ta_2O_5/Al_2O_3$films decreased linearly from 2.03 to 1.56 and dielectric constant was lowered from 23.9 to 7.7 Variation of the dielectric constant with the$Al_2O_3$content was in good agreement with the behavior that was obtained by assuming parallel capacitors of$Al_2O_3$and Ta_2O_5$. Leakage current characteristics of $Ta_2O_5/Al_2O_3$ multilayer films were superior to those of $Ta_2O_5$ and$Al_2O_3$films. $Ta_2O_5/Al_2O_3$ films of 5% and 10%$Al_2O_3$content exhibited excellent leakage current densities which were lower than $10^{-7} A/cm^2$ at 1MV/cm.