• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.64-64
• /
• 2003

대구 인공종묘 생산 기술 개발의 일환으로 수정란에 기생하여 폐사를 유발하는 세균 및 세균 감염 경로를 파악함으로써 수정란의 생존율과 부화율 향상을 위하여 본 실험을 실시하였다. 세균 감염 경로를 파악하기 위하여 난소와 정소 자체 세균 감염 여부를 조사하였다. 일반배지 (BHIA)와 비브리오 선택배지 (TCBS)를 사용하여 세균검사를 실시하였다. 난소의 세균 검사는 생식소 내부를 일부 절개한 후 멸균 roop를 찔러 세균을 검사하였고, 정소는 채정하기 전 복부를 절개하여 멸균 roop로서 적출하여 배지에 도말한 후 배양하였다. 수정란 내 세균 수는 수정란을 각각 20개씩 샘플하여 난 외부에 기생하는 세균을 제거하기 위하여 난소독제로 이용되고 있는 benzalkonium 0.1%로 1분간 소독한 후 멸균 생리식염수로 3회 세척하여 호모게나이즈하여 검사하였다. 호모게나이즈한 액 중 100${\mu}\ell$를 pipetting하여 일반배지(BHIA)에 도말하여 인큐베이터에서 배양하였다. 난소와 정소 내에서 세균이 검출됨에 따라 수정 시 세균 감염을 억제하기 위하여 자외선 살균해수와 일반해수를 수정액으로 사용하여 발생율을 비교 시험하였다. 수정 시간은 1분으로 동일하게 적용하였으며, 수정 용기는 멸균 처리된 일회용 100$m\ell$ 플라스틱 용기를 사용하였다. 수정 후 과다한 정자를 제거하기 위한 세란은 1$\ell$ 멸균 비이커에서 5회 30분 가량 실시하여 정자를 제거하였고 멸균 봉으로 저어주면서 수정란의 점착력을 제거하였다. 수정란은 100$\mu\textrm{m}$ 그물망으로 수정란 유실을 방지한 플라스틱 용기에 수용하여 유효수량 270$\ell$ FRP 수조에 수용하여 3$\ell$/min 환수하였고, 수온은 자연수온 1$^{\circ}C$로 유지하였다. 발생율은 만능투영기로 3회 측정하였다. 수정 후 세균과 기생충에 의한 수정란의 폐사를 억제하기 위하여 수정 직후, 수정 후 1일, 2일째 oxytetracycline과 iodine 처리에 따른 발생율 변화를 조사하였다. 발생율은 만능투영기로 조사하였고, 시험구별로 3회 측정하였다. 경과 일수별로 약제 처리는 약제 미처리 수정란 중 정상적인 발생이 이루어지고 있는 것을 선별하여 조사하였다. 약제 처리에 따른 배체 발생 단계는 수정 후 1일째는 상실기, 2일째는 포배기였다. 수정란 및 대구 자어에서 분리된 V. splendidus 에 의한 폐사를 예방하기 위해 in vivo에서 oxytetracycline 외 5종의 항생제를 대상으로 96well plate에서 최고 농도 250ppm부터 2 fold로 단계 희석하여 $25^{\circ}C$에서 48시간 배양하여 MIC를 조사하였다. 세균 감염경로 파악을 위하여 난소, 정소 및 정자에서 세균을 분리한 결과 일반배지 및 비브리오 선택배지에서 모두 균이 검출되었고, 균 동정 결과 터봇 자어에서 검출된 것으로 보고된(Gatesoupe et al., 1999) V. splendidus로 나타났다. 수정액과 정자 및 미수정란의 세균 분리 결과 일반배지에서 3$\times$10/ml ~ 7$\times$10/ml로 균이 검출되었다. 수정액을 일반해수와 자외선 살균 해수를 사용하여 발생율을 비교한 결과 수정 후 3일째 발생율은 자외선 살균해수 72.3%, 일반해수 52.7%였으며, 수정 후 7일째 40.9%와 25.1%로 자외선 살균해수가 유의적으로 높게 나타났다. 수정 후 경과 일수별로 oxytetracycline과 Iodine을 처리한 결과 수정 직후 처리한 시험구는 7일째 19.8%와 18.9%로 대조구 23.1%와 유의적인 차이가 없는 것으로 나타났다. 수정 후 1일째 처리한 시험구는 54.5%와 56.8%, 수정후 2일째 처리구는 47.9%와 50.6%로 두 시험구 모두 대조구와 수정 직후 처리구보다 유의적으로 높게 나타났다. 수정란 및 대구 자어에서 분리된 V. splendidus 에 의한 폐사를 예방하기 위해 in vivo에서 항생제 종류별 MIC 조사 결과 oxytetracycline이 0.48ppm으로 가장 효과가 높은 것으로 나타났다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.2
• /
• pp.87-94
• /
• 2017

In the nuclear power plant, the steel or polymer liner plates are adopted to prohibit the inner concrete surface from contacting with gas or liquid materials. If there is an accident, the plate may be damaged, and, in this case, concrete shall have the final responsibility to safety requirements. In this paper, an experimental research was carried out to investigate the effects of construction joint and wet and loading conditions on the permeability of concrete. The test results showed that, under a construction joint in the wet condition, leakage of gas pressure has been started from $1kg/cm^2$. However, when there are no construction joints, it is initiated from $2kg/cm^2$. In addition, under the air dried and unloading condition, regardless of with or without the presence of the construction joint, since the gas passage that exist in concrete is constant, leakage has a constant tendency to increase. Finally, under the loading condition, as described in Reference 1, since leakage is inversely proportional to the thickness of the wall, and, considering the wall thickness of the actual plant, it is found that there will not be no problem in the sealing of the gas.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.3
• /
• pp.221-232
• /
• 2009

The load distribution factor (LDF) values of simplified composite H beam panel bridges (SCHPBs) that were subjected to one lane and two lane loads were investigated using three dimensional finite element analyses with the computer program ABAQUS (2007). This study considered some design parameters such as the slab thickness, the steel plate thickness, the span length, and the continuity of the SCHPBs in the development of new LDFs. The distribution values that were obtained from these analyses were compared with those from the AASHTO Standard, LRFD, and the equations presented by Tarhini and Frederick, Huo et al., Back and Shin, and Cai. The AASHTO Standard distribution factors for SCHPBs were found to be very conservative. Sometimes, the distribution values from the finite element analyses for interior girders were similar to the results of the AASHTO LRFD, whereas the values for exterior girders were conservative in most cases. The new distribution values that were presented in this study produced LDFs that are more conservative than those from the finite element method. For the simple application of the design to SCHPBs, bridge engineers can use 0.42 for the interior girder and 0.32 for the exterior girder. The proposed values improve the current design procedure for the LDF problem and increase SCHPB design efficiency.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.4
• /
• pp.377-383
• /
• 2013

This study examined the radiopacity of eight contemporary luting cements by direct digital radiography. Five disc-shaped specimens ($5mm{\times}1mm$) were prepared for each material tested (BisCem, Clearfil SA Luting, Duolink, Maxcem Elite, Multilink Speed, Panavia F 2.0, RelyX Unicem Clicker, V-link). The specimens were radiographed using a Kodak CS 7600 image plate (Carestream Health, Inc., Rochester, NY, USA) and an aluminum step wedge with a range of thicknesses (1.5 to 16.5 mm in 1.5 mm increments) and a 1 mm tooth used as a reference. A dental X-ray machine Kodak 2200 Intraoral X-ray System (Carestream Health, Inc., Rochester, NY, USA), operating at 70 kVp, 4 mA, 0.156 s and a source-to-sample distance of 30 cm, was used. According to international standards, the radiopacity of the specimens was compared with that of an aluminum step wedge using NIH ImageJ software (available at http://rsb.info.nih.gov/ij/).The data was analyzed by ANOVA and a Tukey's post hoc test. Maxcem Elite (5.66) showed the highest radiopacity of all materials, followed in order by Multilink Speed (3.87) and V-link (2.83). The radiopacity of Clearfil SA Luting (1.35), BisCem (1.33), Panavia F 2.0 (1.29) and Duolink (1.10) were between enamel (1.79) and dentin (0.19). RelyX Unicem Clicker (0.71) showed the lowest radiopacity, which was higher than that of dentin. All materials showed a radiopacity above the minimum recommended by the International Organization for Standardization and the American National Standards/American Dental Association with the exception of RelyX Unicem Clicker.

• The Korean Journal of Zoology
• /
• v.38 no.4
• /
• pp.565-569
• /
• 1995

We have previoosly demonstrated that the RecA-like protein of Schizosaccharomyces pombe (S. pombe) is immunologically related to Escherichia coil (E. coil) RecA protein and that the cellular level of the protein is significantly increased by inhibitors of nucleotide pool-forming enzymes such as hydroxyurea (HU) and methotrexate (MTX) (lee and Park, 1994; lee et al., 1994). In this study, we report that the ribonudeotide redudase activity of S. pombe is inhibited by E. coil RecA antibody, as determined by thin layer chromatography using [5-$^3$H]CDP as a substrate. The relative activity of ribonucleotide reductase was dramatically inhibited by 100 mM of flu (26.4% reduction) in in vitro assay, compared to that of non-treated control. The ribonucleotide reductase activity was also inhibited by immunoprecipitation with E. coil RecA antibody (43.3% reduction). These results indicate that the strudure of S. pombe ribonucleotide reductase is in part similar to that of E. coil RecA protein.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.1
• /
• pp.1-18
• /
• 1997

Andesitic pyroclastics and lava flows are deposited as a part of composite volcanoes by Cretaceous volcanic activity in Geojae Island, off the coast of Korea. The andesitic pyroclastics are composed of tuff breccia and lapilli tuff minor intercalated tuff. Lava flows are divided into dense and porphyritic andesite containing phenocrysts of plagioclase, pyroxene, and/or hornblende. The andesitic rocks represent charactersitcs of carc-alkaline BAR association with basalt, basaltic andesite, andesite, and dacite to rhyolite. Major element variations of the volcanic rocks show that $Al_2O_3$, total FeO, CaO, MgO and $TiO_2$ decrease with increasing $SiO_2$ but $K_2O$ and total alkalis increase, and represent differntiation trend of calc-alkaline rock series. In spider diagram, contents of Sr, K, Rb, Ba, and Th are relatively high, but contents of Nb, P, Ti and Cr are low. These petrochemcial characteristics are similar to those of rocks from island arc or continental margein related to plate subduction. Chondrite-normalized REE patterns of volcanic rocks are paralle to subparallel, with LREE enriched than HREE, and show gradual increase of negative Eu anomaly from basalt to dacite and rhyolite, suggesting comagmatic fractional crystallization with minor effects of assimilation and magma mixing. Andesitic rocks are assumed medium-K orogenic andesites that formed in the tectomagmatic environment of subduction zone under normal continental margin arc.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.6
• /
• pp.752-757
• /
• 2017

Analysis has been performed for the penetration of a long-rod into MMC/Ceramic layered armour system with several shot test and a series of simulations. Two types of MMC plate have been fabricated by a liquid pressing method; A356/45%vol.%SiCp with a uniform distribution of SiC particle and Al7075/45%vol.B4Cp with B4C particle. The mechanical properties were measured with the high-speed split Hopkins bar test, hardness test and compression test. The popular Simplified Johnson-Cook model was adopted to represent the material characteristics for FEM simulations. The performance of the MMC applied armour system has been made by comparing with the semi-infinite mild steel target using the depth of penetration(DOP). The results show that placing ceramic front layer provides a certain gain in protection, and that placing another ductile front layer provides a further gain. The application of MMC is found to be attractive.

• 한국해양학회지
• /
• v.7 no.1
• /
• pp.24-45
• /
• 1972

The Han River is an important water source in Seoul and neighbouring districts, for public and industrial supply, and for agriculture and fishery. Nowadays, more than six million inhabitants are supplied withe water from this river. The total length of the river is 470km, and has 17 10$\^$9/㎥ an average annual flow. The hydrographic characteristics at Seoul are 653㎥/sec in an average flow, 4,608㎥/sec in the maximum average flow, and 201㎥/sec in the minimum average flow. These are influenced in some degree by snowmelt in early spring, and greatly by the flood during summer. For the pollution problems, the periods of low flow are critical ones. As a rule they occur around the months November through June. Nowadays, most of the sewage from towns and industries is discharged untreated. Apart from domestic and industrial sewages, there are some discharges of mineral matter by mines in the upriver region. In general, water quality of the Han River is kept very clean and healthy until Kwangnaru of the upper region of Seoul. A large pollution, however, is received in the downstream by the domestic and industrial sewages of Seoul. It can be seen that dissolved oxygen, COD and BOD$\sub$5/ diminish markedly, and the intensity of almost every water parameter of the river continues to increase. Comparison of the figures for 1971 derived from a sampling point 40km downstream of Kwangnaru leads to the conclusion that hardness, Ca and Mg were no changed; alkalinity, Si and soluble- Fe were slightly increased; CO$\sub$2/, acidity, Cl, NO$\sub$2/-N, Cu, Zn and Al were increased in 2 and 3 times; total residue, total ignitious residue, COD, BOD$\sub$5/, NH$\sub$4/-N, PO$\sub$4/-P, Mn, Pb and total-Fe were increased in 4 to 7 times; and SO$\sub$4/, particulate-Fe and Cd were increased in 10 to 11 times. On the other hand, coliforms were increased in 650 times; fecal coliforms in 365 times; enterococci and total plate counts in 30 times, respectively. In view points of water quality standards, the down Han River water is now leveling out in Cd, coliforms and fecal coliforms for the agricultural use; in dissolved oxygen and some trace elements (Cu, Zn, Pb and Cd) for the fishery use; in ammonia, COD, BOD$\sub$5/, and Cd for the drinking use.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.459-463
• /
• 2017

Hot dip galvanizing in the steel plant is one of the most widely used methods for preventing the corrosion of steel materials including structures, steel sheets, and materials for industrial facilities. While hot dip galvanizing has the advantage of stability and economic feasibility, it has difficulty in repairing equipment and maintaining the facilities due to high-temperature oxidation caused by Zn Fume where molten zinc used in the open spaces. Currently, SM45C (carbon steel plate for mechanical structure, KS standard) is used for the equipment. If a part of the equipment is resistant to high temperature and Zn fume, it is expected to improve equipment life and performance. In this study, the manufactured Ni alloy was tested for its corrosion resistance against Zn fume when it was used in the hot dip galvanizing equipment in the steel plant. Two kinds of materials currently used in the equipment, new Ni alloy and Inconel(typical corrosion-resistant Ni alloy), were selected as the reference groups. Two kinds of molten metal were used to confirm the corrosion of each alloy according to the molten metal. Zn fume was generated by bubbling Ar gas from molten Zn in a furnace($500{\sim}700^{\circ}C$) and the samples were analyzed after 30 days. After 30 days, the specimens were taken out, the oxide layer on the surface was confirmed with an optical microscope and SEM, and the corrosion was confirmed using a potentiodynamic polarization test. Corrosion depends on the type of molten metal.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.1-6
• /
• 2005

Analogue physical modelling using granular materials (i.e., sandbox experiments) has been applied with great success to a number of geological problems at various scales. Such physical experiments can also be simulated numerically with the Discrete Element Method (DEM). In this study, we apply the DEM simulation to the collision between the Indian subcontinent and the Eurasian Plate, one of the most significant current tectonic processes in the Earth. DEM simulation has been applied to various kinds of dynamic modelling, not only in structural geology but also in soil mechanics, rock mechanics, and the like. As the target of the investigation is assumed to be an assembly of many tiny particles, DEM simulation makes it possible to treat an object with large and discontinuous deformations. However, in DEM simulations, we often encounter difficulties when we examine the validity of the input parameters, since little is known about the relationship between the input parameters for each particle and the properties of the whole assembly. Therefore, in our previous studies (Yamada et al.,2002a,2002b,2002c), we were obliged to tune the input parameters by trial and error. To overcome these difficulties, we introduce a numerical biaxial test with the DEM simulation. Using the results of this numerical test, we examine the validity of the input parameters used in the collision model. The resulting collision model is quite similar to the real deformation observed in eastern Asia, and compares well with GPS data and in-situ stress data in eastern Asia.