• Journal of Fashion Business
• /
• v.10 no.3
• /
• pp.78-86
• /
• 2006

Coffee extract dyeing on silk fabric using various mordanting agents at different mordanting condition was studied in our previous research. Coffee extract dyeing can exert beautiful colors and have several advantages over the conventional natural dyeing. Since most of natural dyes are expensive for mass production, strongly season and source dependent, and hard to store, and therefore, coffee waste was used as natural dye to create beautiful colors in this study. Coffee waste is inexpensive and easy to store, and provide a comparatively regular quality regardless of season and source. The effects of dyeing condition such as dyeing temperature, dyeing time, and liquor ratio on dyeing characteristics of silk fabrics were investigated. Coffee extract dyed silk showed brilliant colors, and the colors were different with the kind of mordant. Cu, Sn, and Al mordanted silks showed golden yellow with subtle change of hue and value, while Fe mordanted silk showed a brownish green color upon coffee extract dyeing. As the dyeing temperature increased, the dyeability generally increased in all mordanted silk fabrics except Fe mordanted silk until $45^{\circ}C$. The dyeing temperature did not affect the dyeability of Fe mordanted silk fabric. As the liquor ratio increased, the dyeability showed a gradual increase in all mordanted silk except Cu mordanted silk. Cu mordanted silk fabric showed an abrupt increase in dyeability at liquor ratio1:150. The dyeing time effect can be separated into 2 stages. During the initial half an hour, the dyeability did not change significantly, and then, increased after 45 min. dyeing time duration. A further increase in dyeing time after 45 min. did not affect the dyeing efficiency in all mordanted silk fabrics except the Cu mordanted.

• The Research Journal of the Costume Culture
• /
• v.24 no.5
• /
• pp.577-587
• /
• 2016

Natural dye extracted from Salicornia bigelovii was applied to silk fabrics by dip dyeing process. The dyeing properties and the functionalities of the silk fabrics were determined. Factors affecting the dyeing properties such as dyestuff concentration, temperature, time and pH were studied. The colorimetric parameters $L^*$, $a^*$, $b^*$, and H, V/C values were measured to select the optimal mordanting conditions. The color-fastnesses of the dyed and mordanted fabrics were estimated for practical use; in addition, the antibacterial property, ultraviolet protection properties were evaluated. The dyeabilities of silk increased depending on the increasing dye concentration, dyeing time, and dyeing temperature. And optimum dyeing results were achieved when dyeing with 300% (o.w.f.) of dye concentration at $90^{\circ}C$ for 100 minutes and at pH 3. The dyed silk fabrics without mordants produced yellow (Y) color and showed yellow (Y) or green yellow (GY) colors depending on the mordants type. The light fastness of dyed and Al mordanted silk fabrics were found to be excellent, and the drycleaning and rubbing fastness were good. The dyed silk fabrics showed no antibacterial property, but Al and Cu mordanted silk fabrics showed 99.9% reduction rate. The ultraviolet protection properties of the dyed silk fabric was improved. And the ultraviolet protection properties of mordanted samples showed very good ultraviolet protection properties.

• Fashion & Textile Research Journal
• /
• v.8 no.4
• /
• pp.476-480
• /
• 2006

For the purpose of application to new natural dyestuff, the dyeability of Rubus coreanus Miquel extract was analyzed. It was dyed in silk fabric according to various dye concentration, dyeing temperature, dyeing time, and dyeing repetition. And the effects of mordanting conditions were examined as color differences and color fastnesses. The maximum absorbance of Rubus coreanus Miquel extract was at 521 nm. The dyeaffinities were increased gradually as were increased dye concentration, dyeing temperature, dyeing time, and dyeing repetition. The dyeaffinity was increased at pre-mordanted condition, and color difference was increased distinctly at post mordanted condition. The hues of mordanted silk fabrics were RP, P, PB, BG where as non mordanted silk fabric was R. Lightfastness was the best at pre-Sn mordanted and the worst at Post-Al mordanted. Washing and perspiration fastnesses were improved on pre and post-Sn mordanted.

• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.45-54
• /
• 2001

The Purpose of this studs was to investigate dyeing properties of silk and nylon fabrics by Polygonum cuspidatum extract. The properties were evaluated by it's extracting condition, dyeing condition, mordants variables, methods of mordanting and color fastness. Silk fabric showed the highest K/S value at $50-70^\circ{C}$, while Nylon fabric showed at $90^\circ{C}$. Surface color of dyed fabrics were various by the used mordants ; none-, and Al-mordanted fabrics were yellow, Cu-mordanted fabrics were redish yellow, Fe-mordanted fabrics were olive green. Fe-mordanted silk fabrics showed excellent laundering fastness and light fastness. Both silk and nylon fabric showed excellent laundering and dry cleaning fastness.

• Textile Coloration and Finishing
• /
• v.12 no.6
• /
• pp.353-360
• /
• 2000

In this article, arrowroot is extracted in distilled water, and its dyeing properties on wool, nylon, and silk were investigated. Also the effect of mordanting (Al, Cu, Sn, Fe and Cr compounds) on the wash fastness are measured. The wavelength of maximum absorption of the arrowroot extract appears at 250 and 300nm below pH 7, but they shifted to longer wavelength at higher pH values. It appears that the optimum condition of the dyeing of wool, nylon, and silk fabric with arrowroot extract is $60^\circ{C}$, 60 min, and pH 4.0. Mordant treatments are effective in improving wash fastness of polyamide fabrics.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.121-121
• /
• 2012

To evaluate the Hwangsu spring as natural mordants effect on dyeing. The natural mordant effect of Hwangsu spring was analyzed by pH, temperature, trace elements and organic matter. Hwangsu spring having pH 2.42 and $14.4^{\circ}C$ was harvested at the end of September, 2011, in Yeongcheon(Gyeongbuk Province, Korea) and left on a $0^{\circ}C$ and $25^{\circ}C$ before use. The Result of ICP analysis, it contain bned Fe(414.9 ppm), Al(88.9 ppm), Mn(4.9 ppm). Dyeing and post-mordant procedure; Fabrics(cotton, silk, rayon) were dyed with natural colorants(Sopbora Japonica L., Caesalpinia sappan L., Allium cepa L.) for 20 min at $80^{\circ}C$. Hwangsu spring, aluminium sulfate $14-18H_2O(Al_2(SO_4)_3{\cdot}14-18H_2O)$, iron sulfate peptahydrate($FeSO_4{\cdot}7H_2O$), copper sulfate pentahydrate($CuSO_4{\cdot}5H_2O$) were used by post mordants. But in the case of Caesalpinia sappan L. was dyed after pre-mordanting with Al(II). The fabrics were dyed with each mordant solutions at $25^{\circ}C$ for 10min. The colorless also was measured by color-differnce meter. Comparison with a synthetic mordants, the K/S values of cotton fabrics dyed with Hwangsu sping were increased.

• Fashion & Textile Research Journal
• /
• v.16 no.3
• /
• pp.462-468
• /
• 2014

This study investigates the dyeability of soybean protein fabric after dyeing with gallut. In this study, the colorants of gallnut were extracted with boiling water at $60^{\circ}C$ and 60min. Soybean protein fabric was dyed with extracted solution from gallnut according to concentration, temperature and time. After dyeing with gallut solution, dyeability (K/S) was obtained by CCM observation. Al, Cu and Fe were employed as a mordanting agents. Various color changing were produced by the interactions of mordants that were different from soybean protein fabric; however, Al mordant was not indicated as a variable color change. Fastness to washing and light were also investigated. Consequently, the dyeability of the soybean protein fabric dyed with gallut showed reasonable results at 100% o.w.f, $90^{\circ}C$, for 60min. Fastness to washing according to concentration indicated good result as more than grade (4-5) in general. Fastness to light was almost the same compared to fastness to washing at all concentrations. Fastness to washing according to mordants indicated good grade (4) in principle at Al, Cu, and Fe; in addition, fastness to light indicated a good grade too. Fastness to light also indicated the highest dyeability at Fe mordant. This study shows that gallut is a reasonable dyestuff to soybean protein fabric and that it is possible to manufacture a variety of products that use soybean protein fabric.

• Fashion & Textile Research Journal
• /
• v.9 no.1
• /
• pp.119-123
• /
• 2007

Dyeing properties of soybean fabrics on gromwell colorants were studied for the effect of dyeing conditions, such as colorants concentration, temperature, time and pH on the dye uptake and effect of mordants on color change, dye uptake and various colorfastness. Antimicrobial activity of soybean fabrics dyed and sim-mordanted with gromwell colorants was examined by shake flask method. Gromwell colorants showed considerably affinity to soybean fabric and its isotherm adsorption curve was Freundlich type. Therefore, it is considered that hydrogen bonding and Van der Waals force were involved in the adsorption of gromwell colorants to soybean fabric. Soybean fabrics showed R color on Al, Cu and Sn mordant, RP color on Cr and Fe mordant, but soybean fabrics showed low dye uptake depending on mordanting treatment. Light colorfastness was increased for Cr and Fe mordants. Staphylococcus aureus reduction rates were above 90% for Cr and Cu mordanted soybean fabrics, and the others were poor. Klebsiella pneumoniae reduction rates soybean fabrics did not show reduction rate hardly.

• Journal of Fashion Business
• /
• v.22 no.4
• /
• pp.106-117
• /
• 2018

The present study was conducted to investigate dyeing properties and functionality of silk fabrics dyed with extracts from buckwheat skin. Comparative results of color strength(K/S) values of dyed silk fabrics were studied to quantify the effects of dye concentrations, dyeing temperatures, dyeing time and the pH; the effect of mordants; and color changes. And also evaluated the fastness, antimicrobial property, ultraviolet protection properties of the dyed and mordanted silk fabrics. The color strength(K/S) values of silk generally increased depending on the increasing dye concentration, dyeing temperature, and dyeing time. And the highest color strength values were obtained at a dye concentration of 100%(v/v), a dyeing temperature of $90^{\circ}C$, a dyeing of time 80 minutes, and a dyebath of pH 2. The color fastness to light of dyed and mordanted silk fabrics were found to be good, and the drycleaning and rubbing fastness were excellent. The fade of washing fastness was not good, however, the stain of washing fastness and perspiration fastness showed relatively good grade. The Al, Cu, Fe mordanted silk fabrics(except Fe for Klebsiella pneumoniae) showed 99.9% reduction rate. The ultraviolet protection properties of the mordanted fabrics were generally improved. Moreover, the Cu and Fe mordnared fabrics showed very exceptional ultraviolet protection factors.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.1
• /
• pp.3-12
• /
• 2001

The dyeing powder drawn out from Dryopteris crassirhizoma by water was concentrated. Using this powder, the silk and the cotton fabrics were dyed and they measured with the K/S value, surface color, mordant quantity in order to evaluate the dyeability, antimicrobial and deodorant properties. The colorant of Dryopteris crassirhizoma was proved flavonoids by FT-IR spectrum. The K/S values of silk were much higher than those of cotton, the color yield of the silk and cotton fabric were most efficient the postmordanting method. The surface colors on the dyed fabric depended heavily upon mordants used or mordanting methods. For all cases, the value of the dyed fabric was generally dark. The chroma produced clear for the Al-mordant of silk and the Cu-mordant of cotton in the 3% concentration of mordants, the color difference was distinct when using the Fe-mordant. The K/S values of cationized cotton were much higher than cotton. The color fastness was significantly improved when mordants were added, In the case of the light fastness, Fe and Cu-mordants improved more than 1 level. The Cu-mordant showed the greatest antimicrobial and deordarant activity on both of the silk and the cotton.