• 한국세라믹학회지
• /
• 제28권4호
• /
• pp.338-346
• /
• 1991

The alumina-titania composite powders coated with Al2O3 were prepared by the method of hydrolysis-deposition of mixed aluminium salt solution of Al2(SO)4-Al(NO3)3-Urea. The effects of coating-process parameters on the characteristics of coated composite powders were also investigated. As the content of TiO2 dispersed in deionized water increased, the coated composite powders were found to be more uniform in size and unagglomerated. When TiO2 powders were coated for 30 min, the optimum TiO2 content in the coating process was 400 mg/ι. The size of TiO2 particle was increased approximately from 0.7${\mu}{\textrm}{m}$ to 1.0${\mu}{\textrm}{m}$ through coating of Al2O3. The IEP of coated composite powders was pH=8.3 identical to the value of aluminium hydroxides and the zeta-potential showed nearly similar values each other. When heat treating coated composite powders at 130$0^{\circ}C$, only two phases of TiO2(rutile) and Al2TiO5 were observed. These results showed that the suface of TiO2 could be uniformly coated with the aluminium hydroxide.

• 한국세라믹학회지
• /
• 제41권11호
• /
• pp.864-871
• /
• 2004

폐 염화알루미늄(AlCl$_3$) 수용액과 수산화나트륨(NaOH) 용액의 가수분해 반응에 의해 무정형의 수산화알루미늄 겔을 석출시키고, 이를 숙성하여 다공성 유사베마이트(pseudo-boehmite) 겔을 제조하였다 pH를 7.6～11.6 범위로 조절하고 반응온도를 60～10$0^{\circ}C$로 변화시켜 2～24시간 숙성시켰을 때, 겔 침전물의 결정변화, 적외선흡수스펙트럼의 변화, 비표면적 및 기공구조의 변화를 조사하여 최대 기공부피를 갖는 유사베마이트 겔의 제조조건을 확립하였다. pH 7.6～9.6 범위에서 석출된 겔 침전물로부터 250～357 $m^2$/g 정도의 비표면적과 0.4～0.74 cc/g의 기공부피 그리고 58～l14$\AA$의 평균기공크기를 갖는 다공성 유사베마이트가 제조되었으며, pH 10.6～11.6 범위에서 석출된 겔 침전물로부터는 기공이 거의 없는 베이어라이트(bayerite)가 제조되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1079-1082
• /
• 2004

Dense $BaMgAl_{10}O_{17}:Eu^{2+}$ phosphor particles with a spherical shape have been synthesized through spray pyrolysis method using basic aluminum nitrate precursor as a spray solution. Also, a thin layer of silica on the surface of $BaMgAl_{10}O_{17}:Eu^{2+}$ particles were coated by hydrolysis reaction of alkoxide sources with the particles. The correlation between PL intensity and surface treatment by coating for the dense $BaMgAl_{10}O_{17}:Eu^{2+}$ particles have been investigated.

• 한국세라믹학회지
• /
• 제31권8호
• /
• pp.893-901
• /
• 1994

In this study, AlN powder of fine particle size and of high purity was synthesized by the carbothermal reduction-nitridation of monodisperse, spherical Al(OH)3 which had been prepared by sol-gel method using Al(O-sec-C4H9)3 as the starting material. Depending on the mixing order and kinds of reducing agents, the optimum condition for the preparation of AlN was determined as follows. AlN single-phase was produced by the carbothermal reduction-nitridation of (1) Benzene-washed Al(OH)3 and the reducing agent, carbon, which was mixed in a ball mill: for 5 hours at 140$0^{\circ}C$ under NH3 atmosphere; (2) The mixture prepared by hydrolysis of alkoxide solution into which carbon had been dispersed beforehand: for 5 hours at 135$0^{\circ}C$ ; (3) Al(OH)3 Poly(furfuryl alcohol) composite powder: for 2.5 hours at 135$0^{\circ}C$; (4) The mixture of Al(OH)3 and polyacrylonitrile: for 5 hours at 140$0^{\circ}C$. Addition of CaF2 increased the nitridation rate when carbon or polyacrylonitrile was used as the reducing agent; but it had no effect on the nitridation rate when furfuryl alcohol was used as the reducing agent.

• 한국재료학회지
• /
• 제15권3호
• /
• pp.172-176
• /
• 2005

Formation of aluminum hydroxide by a hydrolytic reaction of nano aluminum powder synthesized by a pulsed wire evaporation (PWE) method has been studied. The type and morphology of the hydroxides were investigated with various initial temperatures and pHs. The nano fibrous boehmite (AlOOH) was formed predominantly over $40^{\circ}C$ of the hydrolytic temperature in acid solution, while the bayerite $(Al(OH)_3)$ was formed predominantly below $30^{\circ}C$ in alkali solution with a faceted crystalline structure. As a result the boehmite showed a much larger specific surface area (SSA) than that of bayerite. The highest SSA of the boehmite was about $409\;m^2/g$.

• 한국응용과학기술학회지
• /
• 제25권3호
• /
• pp.380-387
• /
• 2008

The effects of the applied stretch and MgADP binding on the structure of the actin and myosin cross-bridges in rabbit fibers in the rigor state have been investigatedwith improved resolution by x-ray diffraction using synchrotron radiation. To clarify the structure of the ATP hydrolysis intermediates formed by actin and myosin cross-bridges,the effects of various phosphate analogs in the of MgADP on the structure of the thin and thick filaments in glycerinated rabbit muscle fibers in the rigor state investigated by x-ray diffraction with a short exposure time using synchrotron radiation. These results strongly suggest that when MgADP and phosphate analogs such as metallofluorides(BeF3 and AlF4)and vanadate(VO4(Vi)) were added the rigor fibers in the presence of the ATP-depletion backup system, the intensities of the actin-based layer lines were markedly weakened. We found that the intensity of the 14.5 nm-based meridional reflections increase by 20-50% when phosphate analogs such as metallofluorides(BeF3 and AlF4) and vanadate(VO4(Vi)) was added to the rigor muscle.

• 한국표면공학회지
• /
• 제57권1호
• /
• pp.49-56
• /
• 2024

Superhydrophobic surfaces have been expected to be able to provide considerable performance improvements and introduce innovative functions across diverse industries. However, representative methods for fabricating superhydrophobic surfaces include etching the substrate or attaching nanosized particles, but they have been limited by problems such as applicability to only a few materials or low adhesion between particles and substrates, resulting in a short lifetime of superhydrophobic properties. In this work, we report a novel coating technique that can achieve superhydrophobicity by electrophoretic deposition of aluminum nitride (AlN) nanopowders and their self-bonding to form a surface structure without the use of binder resins through a hydrolysis reaction. Furthermore, by using a water-soluble adhesive as a temporary shield for the electrophoretic deposited AlN powders, hierarchical aluminum hydroxide structures can be strongly adhered to a variety of electrically conductive substrates. This binder-free technique for creating hierarchical structures that exhibit strong adhesion to a variety of substrates significantly expands the practical applicability of superhydrophobic surfaces.

• 대한화학회지
• /
• 제38권5호
• /
• pp.391-396
• /
• 1994

강산성 용액에서 $\alpha$-벤족시스티렌(1)의 가수분해를 속도론적으로 다루었다. 과염소산이 5.5M보다 낮은 농도($H_o$ < -3.0)에서 수화파라메타 $\omega$ = + 7.6, $\Phi$ = + 0.54를 얻었다. 용매동위원소효과 $k_{H_2O}/k_{D_2O}$는 0.72였고, Hammett $\sigma^+$ 상수에 대한 치환기 효과 $\rho$ = -0.60이었다. 이 결과와 다른 증거로부터 이 산도 범위에서 엔올에스테르의 가수분해는 $A_{AL}$2 형태의 메카니즘에 의해 진행되었다. 과염소산 농도가 5.5 M 이상에서는 동위원소효과, $k_{H_2O}/_{D_2O}$는 3.32이었고, 치환기 효과, $\rho$=-1.6이었으며, 속도상수는 산도함수, $H_o$에 비례하였다. 따라서 반응메카니즘은 변하여 올레핀이 양성자화되는 첫단계가 속도결정단계가 된다.

• Bulletin of the Korean Chemical Society
• /
• 제31권12호
• /
• pp.3723-3729
• /
• 2010

We investigated the high-excitation voltage cathodoluminescence (CL) performance of blue light-emitting (ZnS:Ag,Al,Cl) and green light-emitting (ZnS:Cu,Al) phosphors coated with metal oxides ($SiO_2$, $Al_2O_3$, and MgO). Hydrolysis of the metal oxide precursors tetraethoxysilane, aluminum isopropoxide, and magnesium nitrate, with subsequent heat annealing at $400^{\circ}C$, produced $SiO_2$ nanoparticles, an $Al_2O_3$ thin film, and MgO scale-type film, respectively, on the surface of the phosphors. Effects of the phosphor surface coatings on CL intensities and aging behavior of the phosphors were assessed using an accelerating voltage of 12 kV. The MgO thick film coverage exhibited less reduction in initial CL intensity and was most effective in improving aging degradation. Phosphors treated with a low concentration of magnesium nitrate maintained their initial CL intensities without aging degradation for 2000 s. In contrast, the $SiO_2$ and the $Al_2O_3$ coverages were ineffective in improving aging degradation.

• 한국분말재료학회지
• /
• 제12권3호
• /
• pp.186-191
• /
• 2005

A formation of aluminum hydroxide by hydrolysis of nano and micro aluminum powder has been studied. The nano aluminum powder of 80 to 100 nm in diameter was fabricated by a pulsed wire evaporation (PWE) method. The micro powder was commercial product with more than $10\;{\mu}m$ in diameter. The hydroxide type and morphology depending on size of the aluminum powder were examined by several analyses such as XRD, TEM, and BET. The hydrolysis procedure of micro aluminum powder was different from that of nano aluminum powder. The nano aluminum powder after immersing in the water was transformed rapidly to a nano fibrous boehmite, accompanying with a remarkable temperature increase, and then further transformed slowly to a stable bayerite. However, the micro powder was changed to the stable bayerite slowly and directly. The formation of fibrous aluminum hydroxide from nano aluminum powder might be due to the fine cracks which were formed by hydrogen gas pressure on the surface hydroxide layer during hydrolysis. The nano powder with large specific surface area and small size reacted more actively and faster than the micro powder, and transformed to meta-stable hydroxide in relatively short reaction time. Therefore, the formation of fibrous boehmite is special characteristic of hydrolysis of nano aluminum powder.