• 한국산학기술학회논문지
• /
• 제21권1호
• /
• pp.560-567
• /
• 2020

점진판재성형은 금형을 제작하지 않고 판재를 가공하는 방법으로서 빠른 시제품 제작과 소량 생산에 적합한 성형법이다. 이러한 점진판재성형의 공정 변수로 공구 직경, 매 스탭당 Z-방향 깊이, 공구 이송 속도, 공구 회전 속도 등은 성형품의 품질에 크게 영향을 미친다. 본 연구에서는 두께가 1.0mm인 Al3004판재를 사용하여 원뿔절두체(VWACF: Varying Wall Angle Conical Frustum) 모델의 점진성형을 실시하였으며, 각각의 변수들의 조합에서 성형성을 판단하였다. BP신경망 (BPNN: Back Propagation Neural Network)를 기반으로 Minitab 소프트웨어를 사용하여 성형 각도를 예측하는 2 차 수학적 모델을 구축하였다. 또한 이 모델을 유전 알고리즘의 목적함수로 사용하였으며 최대 성형 각도로 얻기 위한 최적의 변수 조합을 찾아내었다. 공구 직경은 6mm, 회전 속도는 180rpm, Z-방향 피치는 0.401mm, 이송 속도는 772.4mm/min일 경우 가장 큰 성형 각도인 87.071°를 갖는 컵을 성형할 수 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.138-141
• /
• 2001

The evolution of lectures and microstructure during the warm-rolling and subsequent annealing in aluminum 3004 alloy sheets was investigated by employing X-ray texture measurements and microstructure observations. Whereas the typical $\beta$-fiber orientations with the strong Bs-orientation $\{112\}<110>$ formed in the normally cold-rolled specimen, the warm-rolling at $250^{\circ}C$ led to the development of a strong through thickness texture gradient which was characterized by shear texture at the surface layer and rolling textures at the center layer After warm rolling, ultra-fine grains formed in the thickness layer with shear texture components. Upon recrystallization annealing, the $\{001\}<100>$ Cube-texture developed at the expense of normal rolling texture components the rise to the formation of corase recrystallized grains. However, in the layer with shear texture components the continuous recrystallization took place and the fine grain size persisted even after recrystallization annealing.

• 한국분말재료학회지
• /
• 제13권1호
• /
• pp.62-67
• /
• 2006

Friction welding of $Al_2O_3$ particulate reinforced aluminum composites was performed and the following conclusions were drawn from the study of interfacial bonding characteristics and the relationship between experimental parameters of friction welding and interfacial bond strength. Highest bonded joint efficiency (HBJE) approaching $100\%$ was obtained from the post-brake timing, indicating that the bonding strength of the joint is close to that of the base material. For the pre-brake timing, HBJE was $65\%$. Most region of the bonded interface obtained from post-brake timing exhibited similar microstructure with the matrix or with very thin, fine-grained $Al_2O_3$ layer. This was attributed to the fact that the fine-grained $Al_2O_3$ layer forming at the bonding interface was drawn out circumferentially in this process. Joint efficiency of post-brake timing was always higher than that of pre-brake timing regardless of rotation speed employed. In order to guarantee the performance of friction welded joint similar to the efficiency of matrix, it is necessary to push out the fine-grained $Al_2O_3$ layer forming at the bonding interface circumferentially. As a result, microstructure of the bonded joint similar to that of the matrix with very thin, fine-grained $Al_2O_3$ layer can be obtained.

• 미생물학회지
• /
• 제36권3호
• /
• pp.203-208
• /
• 2000

재조합 플라스미드 pAL850에 함유된 Bacillus circulans KCTC3004 $\alpha$-amylase 유 전자를 pUB110을 이용하여 shuttle 플라스미드 pALS111을 만들어 Bacillus 세포에 이동. 발현시켰다. Bacillus subtilis(고초균)와 Bacillus megaterium(거대균)으로 형질전환된 pALS111로부터 $\alpha$-amylase는 세포증식과 비례하여 생산되었다. 형질전화주가 생산하는 $\alpha$ -amylase의 최대활성을 유전자 공여 균주인 B. circulans와 비교했을 때 고초균은 약 95배, 거대균은 약 34배 정도의 높은 활성을 나타내었다. 그리고 대장균 형질전환주는 분비율이 10% 정도인데 반하여 고초균 형질전화주는 생산된 효소전부를 , 거대균 형질전환주는 약 98%를 세포외로 분비함을 보임으로써 고초균과 거대균은 실용적인 면에서 대장균보다 우월 함을 나타내었다, pALS111의 각 숙주 내에서의 안정성을 살펴본 결과 거대균에서는 92%, 고초균에서는 76%, 대장균에서는 38% 로 나타났다. SDS-PAGE와 zymogram을 통해 추정 된 대장균과 고초균, 거대균에서 발현된 효소의 분자량은 약 55,000으로 확인되었다. 이들 형질전환주가 생산하는 $\alpha$-amylase는 starch 에 작용하여 주된산물로서 maltotriose 이상의 다양한 maltooligosaccharide들을 생산함이 확인 되었다.

• 소성∙가공
• /
• 제21권1호
• /
• pp.49-57
• /
• 2012

It is difficult to estimate the properties of multilayered sheet because they are composed of one or more different materials. Plastic deformation behavior of the multilayered sheet is quite different as compared to each material individually. The deformation behavior of multilayered sheet should be investigated in order to prevent forming defects and to predict the properties of the formed part. In this study, the mechanical properties and formability of stainless steel-aluminum-magnesium multilayered sheet were investigated. The multilayered sheet needs to be deformed at an elevated temperature because of its poor formability at room temperature. Uniaxial tensile tests were performed at various temperatures and strain rates. Fracture patterns changed mainly at a temperature of $200^{\circ}C$. Uniform and total elongation of multilayered sheet increased to values greater than those of each material when deformed at $250^{\circ}C$. The limiting drawing ratio (LDR) was obtained using a circular cup deep drawing test to measure the formability of the multilayered sheet. A maximum value for the LDR of about 2 was achieved at $250^{\circ}C$, which is the appropriate forming temperature for the Mg alloy. Fracture patterns on a circular cup and thickness of formed part were predicted by a rigid-viscoplastic FEM analysis. Two kinds of modeling techniques were used to simulate deep drawing process of multilayered sheet. A single-layer FE-model, which combines the three different layers into a macroscopic single layer, predicted well the thickness distribution of the drawn cup. In contrast, the location and the time of fracture were estimated better with a multi-layer FE model, which used different material properties for each of the three layers.