• 한국전산유체공학회:학술대회논문집
• /
• 2007.04a
• /
• pp.14-16
• /
• 2007

A critical problem in the integration of stores into new and existing aircraft is the safe separation of the stores from the aircraft at a variety of flight conditions representative of the aircraft flight regime. Typically, the certification of a particular store/aircraft/flight condition combination is accomplished by a flight test. Flight tests are very expensive and do expose the pilot and aircraft to a certain amount of risk. Wind tunnel testing, although less expensive than flight testing, is still expensive. Computational Fluid Dynamics(CFD) has held out the promise of alleviating expensive and risk by simulating weapons separation computationally. The forces and moments on a store at carriage and at various points in the flow field of te aircraft can be computed using CFD applied to the full aircraft and store geometry. This study needs full dynamic characteristics study and flow analysis for securing store separation safety. Present study performs dynamic simulation of store separation with flow analysis using Chimera grid scheme which is usually used for moving simulations.

• International Journal of Aerospace System Engineering
• /
• v.2 no.2
• /
• pp.87-91
• /
• 2015

KT-1P for the Peru Air Force will be used as a utility aircraft with upgraded avionics equipment and arming capability based on KT-1 and KA-1. KT-1P should be shown for compatibility of new store loading configurations loaded with dispenser, bomb, and rocket based on aircraft-store compatibility test and evaluation procedures before KT-1P is operated as a light attack aircraft. The weapon system ground test for installation and flight test for envelope expansion including store separation are described in this paper, which was performed referring 'seek eagle program' under MIL-HDBK-1763 and MIL-HDBK-244A.

• Journal of Advanced Navigation Technology
• /
• v.22 no.2
• /
• pp.84-89
• /
• 2018

Due to the development of domestic technology, a variety of aircraft launch weapons have been developed, and the importance of aircraft-store integration certification is increasing. The aircraft-Store integration certification is to certify compliance with the armaments/stores integration criteria set out in the Standard ACC and to prove that there is no problem with the safety flight. Therefore, it is necessary to reflect the requirements of the aircraft in the store development process to reduce the design change requirement in the compatibility verification stage. In this paper, the relationship between the Standards ACC, aircraft-store compatibility reference document MIL-HDBK-1763, and the development process of cruise guided weapons have been analyzed. As a result of the analysis, it was concluded that the design changes in the aircraft-store integration certification stage could be reduced if the aerodynamic and structural design requirements were reflected from the conceptual design stage.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.27 no.4
• /
• pp.9-20
• /
• 2019

A military aircraft generally includes external stores such as fuel tanks or external arming, depending on the purpose of the operation. When a store is dropped from a military aircraft at high subsonic, transonic, or supersonic speeds, the aerodynamic forces and moments acting on the store can be sufficient to send the store back into contact with the aircraft. This can cause damage to the aircraft and endanger the life of the crew. In this study, time accurate computational fluid dynamics (CFD) with dynamic moving grid (moving and deformable mesh, MDM) technique has been used to accurately calculate store trajectories. For the verification of the present numerical approach, a wind tunnel test model for the wing-pylon-finned store configuration has been considered and analyzed. The comparison results for the ejected store trajectories between the present numerical analysis and the wind tunnel test data at the Mach number of 0.95 and 1.2 are presented. It is also importantly shown that the numerical parameter of MDM technique gives significant effect for the calculated store trajectory in the low-supersonic flow such as Mach 1.2.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.4
• /
• pp.73-80
• /
• 2007

Modern aircraft are required to carry various external stores mounted at different locations on the wing. Sometimes the attachment of stores to an aircraft wing leads to flutter speed reduction, which is a very severe aeroelastic problem. In order to suppress structural vibration and expand the flutter boundary of the aircraft with stores, it is necessary to investigate the main problems and characteristics of them. In addition, active vibration control may be required because passive vibration isolators show limited capabilities for the various wing/store configuration. In this paper, therefore, the flutter stability to the various wing/store configurations was investigated and active vibration control of wing/store model was performed using a piezoelectric actuator.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.1
• /
• pp.83-90
• /
• 2023

The external store fitted to the aircraft may affect the flight characteristics and flight safety of the aircraft, which requires the analyses and testing on it. The purpose of this study is to identify and analyze types of failures that can affect the flight safety of aircraft due to the installation of external stores, and to check the flight safety of aircraft through dropping tests of the external stores. After identifying the types of failures that could affect the flight safety of the aircraft, the criticality was calculated to analyze the effect on the flight safety of the aircraft. Four types of failures were selected: unintentional dropping, failure of dropping, unintentional main wing deployment, and release of tail wing restraint of the external store, which are considered to affect the flight safety of the aircraft due to the operation of the external store. As a result of the aircraft's flight safety analysis on the failure types, the criticality requirements were met. Based on this, after obtaining the airworthiness certification, the drop test was successfully performed to confirm the flight safety of the aircraft by mounting an external store on the aircraft. However, in addition to the four hazards carried out in this study, the real external stores of the military aircraft may have various factors affecting the flight safety of the aircraft, so further research will be needed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.1983-1989
• /
• 2012

This paper presents the stability analysis of UH-60 helicopter with external store such like chaff/flare dispenser. An external store can affect the natural frequency of the aircraft and induce the resonance, which cause the failure of structures. In this paper, therefore, Rayleigh method is used to investigate the resonance with aircraft and external store, and transmission formula is used to determine the vibration load. Structural analysis with local modeling method are performed to present the robust design of aircraft with external store. The ground and flight test are also done to verify the stability of the aircraft.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.7
• /
• pp.592-601
• /
• 2018

The GPS/INS integrated navigation system, which is one of the electronic equipments mounted on military aircraft store, can not directly receive GPS signals by the aircraft wing before the drop, so GPS navigation data is received from the aircraft and used for filter integration, afterwards, the integrated navigation is performed using the GPS information directly received through the antenna. In this case, it is possible to operate the mount in old aircraft without any modification of the aircraft when GPS data is transmitted using wireless. However, the delay occurs while the aircraft navigation data is transmitted to the integrated navigation filter of the aircraft store via wireless, which affects the time synchronization of the GPS measurement and the INS information, affecting the integrated navigation performance. In this paper, an algorithm to analyze and compensate the effect of generation and transmission delay that can occur when implementing GPS/INS integrated navigation system of aircraft store that receives GPS data via wireless.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.4
• /
• pp.344-351
• /
• 2023

Static ejection tests were conducted using the 2,000lb-Class Store to provide ejector model for the store separation simulation. In this study, static ejection test device for 2,000lb-class store was constructed and reaction force applied to store was measured over time. In addition, the trajectories of the ejected store were obtained using photogrammetry and compared with the simulations using developed ejector model. The results of the static ejection test were analyzed to determine the cartridge-orifice combination to be used for store separation. Flight tests were performed by applying the analysis results and verified that the store was safely separated from the aircraft.

• Journal of computational fluids engineering
• /
• v.13 no.4
• /
• pp.80-85
• /
• 2008

The prediction of the separation trajectories of external stores released from a military aircraft is an important task in the aircraft design area having the objective to define the operational and release envelopes. This paper presents the results obtained for store separation by employing commercial softwares, FLUENT and CFD-FASTRAN. FLUENT treats the rigid body motion by employing a remeshing scheme. CFD-FASTRAN uses Chimera(overset) grid and interpolations. It was found that, for the prediction of the trajectories and behavior of the stores separated from the wing, both codes show the good agreement with the experimental results.