• 제목/요약/키워드: Air-liquid

검색결과 1,742건 처리시간 0.026초

토양증기추출(Soil Vapor Extraction)을 이용한 토양 내 Trichloroethylene (TCE)과 Toluene정화 실험 (Laboratory Tests for Trichloroethylene (TCE) and Toluene Remediation in Soil Using Soil Vapor Extraction)

  • 이민희;강현민
    • 자원환경지질
    • /
    • 제35권3호
    • /
    • pp.221-227
    • /
    • 2002
  • 토양증기추출(Soil Vapor Extraction)법을 이용하며 대표적 휘발성 NAPL(Non-aqueous phase liquid)인 TCE (trichloroethylene)와 toluene을 토양으로부터 제거하는 칼럼 실험을 실시하였다. 균질한 Ottawa sand와 실제 오염지역의 토앙들이 사용되었으며, 토양특성 및 증기추출 조건들이 정화효율에 미치는 영향을 규명하였다. 직경 2.5cm, 길이 30cm인 유리 칼럼이 사용되었고, 붉은색으로 염색된 TCE 또는 toluene 4 gram이 주입되었다 주입 공기가 일정한 속도로 칼림 내에 주입될 수 있도록 공기 유량계를 설치하여 0.03 L/min의 일정한 속도로 공기가 주입되도록 하고, 퍼지 장치를 설치하여 주입 공기의 습윤도를 99% 이상으로 유지하였다. 칼럼으로부터 유출되는 가스는 자동 가스시료주입 밸브장치를 이용하여 가스크로마토그래피 칼럼 내로 주입되게 하여, FID 검출기로 유출 가스 농도를 분석하였다. Ottawa sand로 충진된 칼럼실험에서는 매질의 입자크기, 함수율, 토양 내 오염물 체류시간 등을 변화시켜 실험을 반복하였다. TCE로 오염된 세립질 Ottawa sand 칼럼실험에서 유출 공기의 최대 농도는 조립질 Ottawa sand 칼럼의 유출 농도보다 약 20% 정도 감소하였고, 오염지역의 실제토양 칼럼실험에서는 최대유출농도가 조립질 Ottawa sand칼럼의 농도보다 약 50% 감소하였으나, 20 liter 공기 주입 후부터는 모두 비슷한 농도감소 현상을 나타내었으며 초기 주입량의 90 % 이상이 제거되었다. 함수율증가에 따른 유출공기의 농도 감소는 거의 나타나지 않았으며, TCE 주입 후 7일 동안 방치하였다가 SVE를 실시한 칼럼 실험에서도 잔류하는 TCE의 양이 약간 증가하였지만 20liter 공기 추출 후에는 초기 주입량의 90% 가, 40 liter 공기 추출 후에는 98% 이상이 제거되었다. Toluene 으로 오염된 칼럼 실험에서도 TCE와 비슷한 제거 경향을 나타냈으며 200 liter 공기 추출 후에는 오염물 초기 주입량의 98% 이상이 제거되었다. 본 실험 결과로부터 증기추출법을 이용한 TCE, toluene 정화 효율성이 규명되었으며, 휘발성 NAPL로 오염된 실제 토양을 복원하기위한 SVE법의 적용가능성을 확인할 수 있었다.

불량환경하(不良環境下)에서의 제초제(除草劑) 약해(藥害)와 경감기술(輕減技術) (Herbicidal Phytotoxicity under Adverse Environments and Countermeasures)

  • 권용웅;황형식;강병화
    • 한국잡초학회지
    • /
    • 제13권4호
    • /
    • pp.210-233
    • /
    • 1993
  • The herbicide has become indispensable as much as nitrogen fertilizer in Korean agriculture from 1970 onwards. It is estimated that in 1991 more than 40 herbicides were registered for rice crop and treated to an area 1.41 times the rice acreage ; more than 30 herbicides were registered for field crops and treated to 89% of the crop area ; the treatment acreage of 3 non-selective foliar-applied herbicides reached 2,555 thousand hectares. During the last 25 years herbicides have benefited the Korean farmers substantially in labor, cost and time of farming. Any herbicide which causes crop injury in ordinary uses is not allowed to register in most country. Herbicides, however, can cause crop injury more or less when they are misused, abused or used under adverse environments. The herbicide use more than 100% of crop acreage means an increased probability of which herbicides are used wrong or under adverse situation. This is true as evidenced by that about 25% of farmers have experienced the herbicide caused crop injury more than once during last 10 years on authors' nationwide surveys in 1992 and 1993 ; one-half of the injury incidences were with crop yield loss greater than 10%. Crop injury caused by herbicide had not occurred to a serious extent in the 1960s when the herbicides fewer than 5 were used by farmers to the field less than 12% of total acreage. Farmers ascribed about 53% of the herbicidal injury incidences at their fields to their misuses such as overdose, careless or improper application, off-time application or wrong choice of the herbicide, etc. While 47% of the incidences were mainly due to adverse natural conditions. Such misuses can be reduced to a minimum through enhanced education/extension services for right uses and, although undesirable, increased farmers' experiences of phytotoxicity. The most difficult primary problem arises from lack of countermeasures for farmers to cope with various adverse environmental conditions. At present almost all the herbicides have"Do not use!" instructions on label to avoid crop injury under adverse environments. These "Do not use!" situations Include sandy, highly percolating, or infertile soils, cool water gushing paddy, poorly draining paddy, terraced paddy, too wet or dry soils, days of abnormally cool or high air temperature, etc. Meanwhile, the cultivated lands are under poor conditions : the average organic matter content ranges 2.5 to 2.8% in paddy soil and 2.0 to 2.6% in upland soil ; the canon exchange capacity ranges 8 to 12 m.e. ; approximately 43% of paddy and 56% of upland are of sandy to sandy gravel soil ; only 42% of paddy and 16% of upland fields are on flat land. The present situation would mean that about 40 to 50% of soil applied herbicides are used on the field where the label instructs "Do not use!". Yet no positive effort has been made for 25 years long by government or companies to develop countermeasures. It is a really sophisticated social problem. In the 1960s and 1970s a subside program to incoporate hillside red clayish soil into sandy paddy as well as campaign for increased application of compost to the field had been operating. Yet majority of the sandy soils remains sandy and the program and campaign had been stopped. With regard to this sandy soil problem the authors have developed a method of "split application of a herbicide onto sandy soil field". A model case study has been carried out with success and is introduced with key procedure in this paper. Climate is variable in its nature. Among the climatic components sudden fall or rise in temperature is hardly avoidable for a crop plant. Our spring air temperature fluctuates so much ; for example, the daily mean air temperature of Inchon city varied from 6.31 to $16.81^{\circ}C$ on April 20, early seeding time of crops, within${\times}$2Sd range of 30 year records. Seeding early in season means an increased liability to phytotoxicity, and this will be more evident in direct water-seeding of rice. About 20% of farmers depend on the cold underground-water pumped for rice irrigation. If the well is deep over 70m, the fresh water may be about $10^{\circ}C$ cold. The water should be warmed to about $20^{\circ}C$ before irrigation. This is not so practiced well by farmers. In addition to the forementioned adverse conditions there exist many other aspects to be amended. Among them the worst for liquid spray type herbicides is almost total lacking in proper knowledge of nozzle types and concern with even spray by the administrative, rural extension officers, company and farmers. Even not available in the market are the nozzles and sprayers appropriate for herbicides spray. Most people perceive all the pesticide sprayers same and concern much with the speed and easiness of spray, not with correct spray. There exist many points to be improved to minimize herbicidal phytotoxicity in Korea and many ways to achieve the goal. First of all it is suggested that 1) the present evaluation of a new herbicide at standard and double doses in registration trials is to be an evaluation for standard, double and triple doses to exploit the response slope in making decision for approval and recommendation of different dose for different situation on label, 2) the government is to recognize the facts and nature of the present problem to correct the present misperceptions and to develop an appropriate national program for improvement of soil conditions, spray equipment, extention manpower and services, 3) the researchers are to enhance researches on the countermeasures and 4) the herbicide makers/dealers are to correct their misperceptions and policy for sales, to develop database on the detailed use conditions of consumer one by one and to serve the consumers with direct counsel based on the database.

  • PDF

태양열(太陽熱) 집열기개발(集熱器開發)에 관(關)한 연구(硏究) - 포물반사곡면(抛物反射曲面)으로된 2차원(二次元) 집광식(集光式) 태양열(太陽熱) 집열기(集熱器)의 성능분석(性能分析) - (Development of a Solar Collector Performance of Cylindrical Parabolic Concentrating Solar Collector)

  • 송현갑;연광석;조성찬
    • Journal of Biosystems Engineering
    • /
    • 제10권1호
    • /
    • pp.54-68
    • /
    • 1985
  • It is desirable to collect the solar thermal energy at relatively high temperature in order to minimize the size of thermal storage system and to enlarge the scope of solar thermal energy utilization. So far the concentrating solar collector has been developed to collect solar thermal energy at relatively high temperature, but it has some difficulties in maintaining the volumetric body of solar collector for long term utilization. On the other hand, the flat-plate solar collector has been developed to collect the solar thermal energy at low temperature, and it has advantages in maintaining the system for long term utilization, since it's thickness is thin and not volumetric. In this study, to develop a solar collector that has both advantages of collecting solar thermal energy at high temperature and fixing conveniently the collector system for long term period, a cylindrical parabolic concentrating solar collector was designed, which has two rows of parabolic reflectors and thin thickness such as the flat-plate solar collector, maintaining the optical form of concentrating solar collector. The characteristics of the concentrating parabolic solar collector newly designed was analysed and the results are summarized as follows; 1. The temperature of the air enclosed in solar collector was all the same as $50^{\circ}C$ in both cases of the open and closed loop, and when the heat transfer fluid was not circulated in tubular absorber, the maximum surface temperature of the absorber was $118-120^{\circ}C$, this results suggested that the heat transfer fluid could be heated up to $118^{\circ}C$. 2. In case of longitudinal installation of the solar collector, the temperature difference of heat transfer fluid between inlet and outlet was $4^{\circ}-6^{\circ}C$ at the flow rate of $110-130{\ell}/hr$, and the collected solar energy per unit area of collector was $300-465W/m^2$. 3. The collected solar energy per unit area for 7 hours was 1960 Kcal/$m^2$ for the open loop and 220 Kcal/$m^2$ for the closed loop. Therefore it is necessary to combine the open and closed loop of solar collectors to improve the thermal efficiency of solar collector. 4. The thermal efficiency of the solar collector (C.P.C.S.C.) was proportional to the density of solar radiation, indicating the maximum thermal efficiency ${\eta}_{max}=58%$ with longitudinal installation and ${\eta}_{max}=45%$ with lateral installation. 5. The thermal efficiency of the solar collector (C.P.C.S.C.) was increased in accordance with the increase of flow rate of heat transfer fluid, presenting the flow rate of $110{\ell}/hr$ was the value of turning point of the increasing rate of the collector efficiency, therefore the flow rate of $110{\ell}/hr$ was considered as optimum value for the test of the solar collector (C.P.C.S.C.) performance when the heat transfer fluid is a liquid. 6. In both cases of longitudinal and lateral installation of the solar collector (C.P.C.S.C.), the thermal efficiency was decreased linearly with an increase in the value of the term ($T_m-T_a$)/Ic and the increasing rate of the thermal efficiency was not effected by the installation method of solar collector.

  • PDF

폐전기차 셀분말의 열처리 조건에 따른 선택적 리튬침출 연구 (Study on Selective Lithium Leaching Effect on Roasting Conditions of the Waste Electric Vehicle Cell Powder)

  • 정연재;손성호;박성철;김용환;유봉영;이만승
    • 자원리싸이클링
    • /
    • 제28권6호
    • /
    • pp.79-86
    • /
    • 2019
  • 최근, 전기차 증가에 따른 리튬 전지의 사용량 증가로 리튬 가격 증가 및 폐리튬전지 발생량이 증가하고 있다. 이러한 이유로 폐리튬전지 내 리튬 회수에 대한 연구가 진행되고있다. 본 연구에서는 폐전기차 셀분말의 열처리 조건에 따른 선택적 리튬 침출에 관한 연구를 진행하였다. 셀 분말(LiNixCoyMnzO2, LiCoO2)로부터 선택적 리튬 침출을 위해서는 환원을 통한 상변화 및 분리가 필요하다. 폐전기차 셀분말 내 탄소는 고온에서 산소와 반응하여 환원제 역할을 한다. 적정 온도를 알고자 대기/질소 분위기에서 TG-DSC 분석 및 550 ~ 850 ℃ 열처리 후, XRD 분석을 하였다. 열처리 된 분말은 ICP 분석을 위해 D.I water에서 1:10 비율로 침출 후 분석하였다. XRD 분석결과, 700 ℃에서 Li2CO3 피크가 확인되었다. 850 ℃ 열처리 시 Li2O의 피크가 확인되었는데, 이는 Li2CO3가 723 ℃ 이상의 온도에서 Li2O와 CO2로 분해되었기 때문이다. 또한 Li2O와 Al2O3와 반응으로 LiAlO2가 확인되었다. 850 ℃에서 열처리 시 Li 침출율이 낮아졌는데 이는 LiAlO2가 D.I water에서 침출하지 않기 때문으로 판단된다. 리튬 침출율의 경우 열처리의 조건에 따라 달라지며, 질소 분위기 중 700 ℃로 열처리 시 약 45 %의 리튬침출이 확인되었다. 침출 용액을 고-액분리 후증발농축하여 XRD 분석을 실시한 결과, Li2CO3의 피크를 확인하였다.

농산물과 토양에 대한 퍼클로레이트 함량 평가 및 생물농축계수 산출 (Bioconcentration Factor(BCF) of Perchlorate from Agricultural Products and Soils)

  • 김지영;김민지;이정미;김두호;박기문;김원일
    • 한국환경농학회지
    • /
    • 제32권3호
    • /
    • pp.224-230
    • /
    • 2013
  • 퍼클로레이트의 인체 노출경로 중 식품섭취로 인한 노출경로가 전체 노출경로의 대부분을 차지하고 있음에도 불구하고 국내에서는 식품에 대한 연구가 미비한 상태이다. 또한, 국내 오염물질에 대한 국내산 토양으로부터 농산물로의 생물농축계수에 대한 데이터베이스가 미흡한 상태이므로 데이터베이스 체계 구축을 위한 연구도 필요한 실정이다. 본 연구에서는 퍼클로레이트 계수 산출을 위해 농산물이 재배된 토양을 함께 채취하여 농산물과 토양에 대한 각각의 퍼클로레이트 함량을 조사하고 그 결과를 이용해 생물농축계수 및 위해 평가를 실시하였다. 그 결과 농산물 각 그룹별 퍼클로레이트의 평균함량이 곡류 2.70, 과일류 1.43, 채소류 $10.32{\mu}g/kg$으로 녹색 채소류에서 가장 높은 함량이 조사되었으며, 본 연구에서 얻어진 결과 값은 기존의 국내 외 연구 결과 값과 비슷한 값을 나타내는 것을 확인 할 수 있었다. 토양의 경우 곡류 8.38, 과일류 1.01, 채소류 $5.20{\mu}g/kg$의 함량이 조사되었다. 이렇게 얻어진 농산물과 토양의 결과를 이용해 토양에서 농산물로의 퍼클로레이트 생물농축계수를 산출한 결과 깻잎(37.88) > 옥수수(21.51) > 시금치(10.57) > 귤(4.39) > 부추(2.89) > 호박(1.90) 순으로 채소류에서 높은 생물농축계수를 나타냈다. 실제 토양에서는 농산물마다 흡수이행 되는 패턴이 다르기 때문에 퍼클로레이트의 전이 매커니즘 규명 등에 관한 연구가 더 필요할 것으로 사료된다. 또한 실제 퍼클로레이트가 함유된 농산물을 섭취하였을 경우 퍼클로레이트에 대한 인체 노출량을 조사한 결과, 곡류, 채소류, 과일류 모두 2세 미만 그리고 3~6세의 영유아 그룹에서 높은 노출량을 확인할 수 있었으며 곡류, 과일류, 채소류 모두 1이하로 안전한 수준이기는 하나 곡류, 과일류, 채소류 대부분이 영유아 그룹에서 높은 노출량을 나타내고 있으므로 취약계층에 대한 연구가 더 필요할 것으로 사료된다.

판형 웨이브가이드 초음파 센서를 이용한 소듐냉각고속로 원격주사 검사기법 개발 (Development of a Ranging Inspection Technique in a Sodium-cooled Fast Reactor Using a Plate-type Ultrasonic Waveguide Sensor)

  • 김회웅;김상활;한재원;주영상;박창규;김종범
    • 한국소음진동공학회논문집
    • /
    • 제25권1호
    • /
    • pp.48-57
    • /
    • 2015
  • 제 4세대 원자로로 개발되고 있는 소듐냉각고속로는 냉각재로 사용되는 소듐의 물과 공기에 의한 반응을 방지하기 위하여 원자로 헤드의 개방 없이 회전 구동만을 이용하여 핵연료 교환을 수행한다. 따라서 핵연료 교환을 위해서는 노심과 상부내부구조물 사이의 공간에 원자로 헤드의 회전 구동을 방해하는 장애물의 존재 여부를 확인하는 검사가 반드시 선행되어야 하는데, 소듐의 불투명성으로 인해 통상적인 광학 장비를 사용한 검사방법으로는 장애물의 확인이 어렵고, 초음파를 이용한 검사방법이 적용되어야 한다. 이 연구에서는 불투명한 소듐 중에서 노심과 상부내부구조물 사이의 장애물 존재 여부를 확인하기 위하여 판형 웨이브가이드 초음파 센서를 적용한 원격주사 검사기법을 개발하였다. 웨이브가이드 센서는 원자로헤드 상부의 저온 구간에 초음파 트랜스듀서를 설치하고 길이가 긴 웨이브가이드를 사용하여 노심 상부의 고온 고방사능 소듐 내부로 초음파를 전파시키기 때문에, 고온 고방사능에 의한 손상 없이 장시간 적용이 가능한 장점을 가지고 있다. 먼저, 수평 방향으로 초음파를 방사시킬 수 있는 10 m 길이의 수평 빔 웨이브가이드 센서를 설계 제작하였고, 제작된 센서의 특성 분석을 위한 빔 프로파일 측정 및 기초 실험을 수행하여 방사되는 초음파의 빔 폭과 전파 거리를 평가하였다. 또한, 실제 장애물로 작용할 수 있는 부품들의 형상인 원형 목표물에 대한 원격탐지 성능시험을 수행하여 개발된 원격주사 기술의 유용성을 평가하였다.

소 체외수정란의 Slow Freezing을 위해서 Ethylene Glycol 동결보호제에 Sucrose 첨가 농도에 의한 동결효율 (Effect of Sucrose Concentration on Survival After Frozen-thawed of Bovine IVF Blastocysts in Ethylene Glycol Based Freezing Medium for Slow-Cooling)

  • 조상래;김현종;최창용;진현주;손동수;최선호
    • Journal of Animal Science and Technology
    • /
    • 제48권6호
    • /
    • pp.797-804
    • /
    • 2006
  • 본 연구에서는 동결 보호제 EG l에 sucrose 첨가 농도에 따른 생존성의 실험의 결과를 요약하면 다음과 같다. 1.5 M EG와 1.8 M EG 만을 이용하여 동결융해 후 생존서의 조사한 결과 71.1%와 70.2%로 각각 나타났다. 총세포수에 있어서도 127±1.3개와 124±1.6개로 생존율과 총세포수에 있어서도 두 그룹간에는 유의적인 차이를 보이지 않았다. 1.5 M EG와 1.8 M EG에 0.1 M sucrose를 각각 첨가한 후 동결 보존하여 융해 하였을 때 생존율과 총세포수 조사 결과는 1.5 M EG에 0.1 M sucrose 처리구가 73.6% 그리고 1.8 M EG 에 0.1 M sucrose 첨가군은 76.9%의 결과를 보였으며 총세포수 에 있어서도 118±1.2 와 112±1.2 개의 결과를 보여 생존성과 총세포수에 있어서도 두 처리군 모두 유의적인 차이를 나타내지 않았으나 1.5 M EG 처리구에서 총세포수는 다소 높은 경향을 보였다. 1.5 M EG 와 1.8 M EG에 0.3 M sucrose를 첨가하여 각각 생존성과 총세포수 조사 결과는 70.8%와 88.7%의 생존율을 나타내어 1.8 M EG 에 0.3 M sucrose 처리구가 유의적으로(P<0.05) 높은 결과를 보였다. 따라서 소 체외수정란을 conventional slow-freezing 방법으로 동결 보존할 경우는 1.8 M EG 동결보호제에 0.3 M sucrose를 병행하여 사용하는 방법이 수정란을 최상의 상태로 유지할 수가 있어 수정란이식에 적용할 경우 효과적일 것으로 사료된다.

상향류 인 결정화공정을 이용한 슬러지 발효 유출수로 부터의 영양소 회수 (Nutrient Recovery from Sludge Fermentation Effluent in Upflow Phosphate Crystallization Process)

  • 안영호
    • 대한환경공학회지
    • /
    • 제28권8호
    • /
    • pp.866-871
    • /
    • 2006
  • 연속 회분식 방식의 실험실 규모 상향류 반응조를 사용하여 인 결정화공정을 이용한 영양물질 회수에 대한 연구를 수행하였다. 양이온 공급원으로서 산업폐기물인 폐석회와 마그네슘염을 이용하여 그 운전특성을 비교하였다. 이 연구는 고성능 발효조와 인 결정화 반응조로 구성된 새로운 통합 슬러지 처리 공정에 있어서 인 결정화공정의 성공적인 적용성 평가에 초점을 두고 있다. 발효조 유출수와 유사한 특성으로 제조된 합성폐수를 이용한 첫 번째 struvite 결정화 실험에서 반응은 $0.5{\sim}1$ hrs 사이의 반응시간에서 빠르게 진행되었는데, 그 동안 상당량(약 60% 이상)의 암모니아와 인이 제거되었다. 알칼리성 조건이라는 기질의 고유특성으로 인하여 암모니아 탈기 현상이 다소 발생하였으나 그 정도는 미미한 것(<5%)으로 나타났다. 또한 공기주입에 의한 이산화탄소 탈기조건을 추가적으로 제공하였을 때 struvite 형성속도의 향상은 일어나지 않았다. 실폐수로서 발효조 유출수를 사용한 두 번째 실험에서 stuvite 결정화를 위한 마그네슘염의 최적주입량은 struvite형성질량비와 유사한 0.86 g Mg $g^{-1}$ P이었다. 반면에 폐석회의 최적주입량은 0.3 g $L^{-1}$으로 다소 높게 나타났으며, 약 3시간의 반응시간 조건에서 $NH_4$-N과 $PO_4$-P의 제거효율은 각각 80%와 41%로 나타났다. 각 실험에서 침전물을 현미경으로 분석한 결과 마네슘염을 사용한 경우 프리즘과 같은 결정체가 관찰된 반면 폐석회를 사용한 경우는 비결정질의 결정체가 주로 관찰되었다. 하수처리용량 158,880 $m^3\;d^{-1}$의 실규모 처리시설의 경우를 대상으로 한 통합 슬러지처리시스템의 물질수지 분석결과 결정화 반응조 유출수로 부터의 반송되는 영양물질의 재순환 부하(각각 하수 1 $m^3$ 당 0.13 g N와 0.19 g P)는 매우 낮게 유지되는 것으로 나타났다. 그러므로 이미 산업폐기물 형태로 존재하는 폐석회를 본 연구에서와 같이 통합 슬러지 처리시스템의 영양물질 회수 공정에서 재이용하는 것은 높은 환경적 및 경제적 이익과 동시에 산업폐기물의 지속발전적 처리/처분이라는 다양한 장점을 가질 것이다.

중·저준위 방사성 폐기물 처리용 시멘트 고화체의 압축강도와 동탄성계수의 관계 (Relationship between Compressive Strength and Dynamic Modulus of Elasticity in the Cement Based Solid Product for Consolidating Disposal of Medium-Low Level Radioactive Waste)

  • 김진만;정지용;최지호;신상철
    • 콘크리트학회논문집
    • /
    • 제25권3호
    • /
    • pp.321-329
    • /
    • 2013
  • 방사성 폐기물 최종 매립장이 완공됨으로써 그동안 원자력 발전소 내에서 관리하고 있던 중 저준위 방사성 폐기물은 최종 처분장으로 이송하여 관리해야 한다. 주로 액상의 이온교환수지로 구성된 중 저준위 방사성 폐기물은 플라스틱 또는 강제용기 안에서 시멘트계 재료로 고화처리 되고 있다. 시멘트계 재료는 취성적이므로 이송 중 낙하, 충돌 등에 의해 붕괴될 경우, 방사성 물질이 유출될 수 있는 가능성이 있다. 안전성이 있는 이송장비를 설계하기 위해서는 현재의 고화체가 어느 정도의 강도를 발현하고 있는지를 확인할 필요가 있다. 그러나 방사성 물질을 포함하고 있는 폐기물의 강도를 직접법에 의해 측정하는 것은 위험하므로 불가능하기 때문에 동탄성계수와 같은 비파괴시험을 통해 간접적으로 강도를 파악하여야 한다. 따라서 방사성 폐기물의 압축강도와 동탄성계수의 관계를 규명할 필요가 있다. 폐기할 시점에서 이온교환수지 처리용 고화체의 압축강도는 3.44 MPa (500 psi)이다. 이론적으로 시멘트는 시간의 경과에 따라서 강도가 증진되기 때문에 폐기된 후 수년에서 수십년이 경과한 현 시점에서 고화체의 강도는 기준치를 크게 상회할 가능성이 있다. 이와 같은 배경에서 이 연구에서는 중 저준위 방사성 폐기물 처리용시멘트 고화체의 재료구성을 유지하면서 3~30 MPa 범위의 다양한 강도 수준을 갖는 시멘트 고화체를 제조하고 이를 대상으로 압축강도와 동탄성계수의 관계를 도출하고자 하였다. 실험 결과, AE제 첨가율의 변화에 의해 목표로 설정하였던 3~30 MPa 범위를 만족하는 고화체의 제조가 가능하였다. 또한 미리 기포를 제조하여 혼입하는 방법보다 AE제를 배합수에 직접 혼합하는 방법이 단위용적질량 및 강도를 보다 정확히 조절하는데 유리한 것으로 나타났다. AE제 첨가율에 의한 단위용적질량과 공기량은 첨가율이 낮은 범위에서 급격하게 변화하였으며 첨가율이 증가할수록 변화량은 감소하였다. 이온교환수치 처리용 시멘트 고화체의 동탄성계수는 4.1~10.2 GPa 범위로 나타났으며, 일반콘크리트 보다 약 20 GPa 정도 낮고 그 차이는 강도의 증가에 따라 증가하는 것으로 나타났다. 이온교환수지 처리용 시멘트 경화체에서도 압축강도와 동탄성계수는 선형적인 관계를 보이고 있다.

세균(細菌)에 의(依)한 Amylase생산(生産)에 관한 연구(硏究) (Studies on the Amylase Production by Bacteria)

  • 박윤중
    • Applied Biological Chemistry
    • /
    • 제13권2호
    • /
    • pp.153-170
    • /
    • 1970
  • 1. Amylase 생산세균(生産細菌)의 분리(分離) 및 동정(同定) 다수(多數)의 amylase 생산세균(生産細菌)을 검색(檢索)하여 공기(空氣) 및 토양(士壞)에서 강력균주(强力菌株) A-12 및 S-8를 얻었다. 이들 균(菌)의 균학적(菌學的) 성질(性質)을 검토(檢討)한 결과(結果) 균주(菌株) A-12 및 S-8의 모든 특성(特性)은 Bergey's manual의 Bac. subtilis와 비슷하나 몇가지 탄수화물(炭水化物)로부터의 산생성(酸生成)과 구연산 이용성(利用性)이 달랐다. 즉(卽) A-12는 구연산을 이용(利用)하지 않고 arabinose와 xylose에서 산(酸)을 생성(生成)하지 않았으며 S-8는 xylose에서 산(酸)을 생성(生成)하지 않았다. 2. 액체배양(液體培養)에 의(依)한 Amylase 생산(生産) 정치배양(靜置培養)에 있어서 균주(菌株) A-12의 amylase 생산(生産)에 관(關)한 제반조건(諸般條件)을 검토(檢討)한 결과(結果)는 다음과 같다. (1) 최적조건(最適條件)은 배양온도(培養溫度) $35^{\circ}C$, 초발(初發) PH $6.5{\sim}7.0$, 배양기간(培養期間) $3{\sim}4$일(日)의 조건(條件)이었다. (2) 전배양(前培養)한 균(菌)의 보존기간(保存期間)는 amylase 생성(生成)에 영향(影響)을 주지 않았다. (3) amylase 생산(生産)에 있어서 각종(各種)의 고형원료중(固形原料中) 탈지대두박(脫脂大豆粕)이 가장 좋았다. 그러나 탈지대두박(脫脂大豆粕)을 alkali 처리(處理)한 것은 유채박(油菜粕)의 경우와는 반대(反對)로 그대로 사용(使用)하는 것보다 효과(效果)가 적었다. 대두박(大豆粕) alkali 침출액(浸出液)에 가용성(可溶性) 전분(澱粉)을 첨가(添加)한 배지(培地)는 amylase 생성(生成)을 뚜렷이 증가(增加)시켰다. (4) 탄소원(炭素源)이 부족(不足)한 배지(培地)에서는 1%의 ethanol의 첨가(添加)는 amylase 생성(生成)을 증가(增加)시켰으나 탄소원(炭素源)이 풍부(豊富)한 배지(培地)에서는 효과(效果)가 없었다. (5) 저렴(低廉)하게 구(求)할 수 있는 밀기울에 10%의 탈지대두박(脫脂大豆粕)을 혼합(混合)할 때에는 amylase 생성(生成)이 밀기울만의 경우의 2.5배(倍)로 증가(增加)되었다. (6) 탈지분유(脫脂粉乳)의 단용배지(單用培地)에서는 amylase 생성(生成)이 극(極)히 불량(不良)하였으나 탈지분유(脫脂粉乳)에 20%의 밀기울을 혼합(混合) 할때에는 amylase 생산(生産)이 월등(越等)히 증대(增大)되었다. 그 역가(力價)는 10% 농도배지(濃度培地)에서 $D^{40^{\circ}}_{30'}$ 7,000(L.S.V. 1,800)이었다. (7) 각종(各種) 무기염류(無機鹽類)의 첨가효과(添加效果)는 인정(認定)되지 않았다. 3. 밀기울 고체배양(固體培養)에 있어서 균주(菌株) A-12의 amylase 생산(生産)에 관(關)한 제반조건(諸般條件)을 검토(檢討)한 결과(結果)는 다음과 같다. (1) 최적배양조건(最適培養條件)은 배양온도(培養溫度) $33^{\circ}C$, 기간(其間) 2일간(日間) 첨수량(添水量) $150{\sim}175%$, 배지(培地)의 두께 1.5cm의 조건(條件)이었다. 최적조건(最適條件)에서의 amylase 역가(力價)는 $D^{40^{\circ}}_{30'}$ 36,000 (L.S.V. 15,000)이었다. (2) 각종(各種) 유기자원(有機資源) 및 무기물질(無機物質)의 첨가효과(添加?果)는 인정(認定)되지 않았다.

  • PDF