• 에너지공학
• /
• 제24권4호
• /
• pp.166-174
• /
• 2015

본 연구에서는 물성 변화에 따라 자동차 성능 및 환경에 미치는 영향을 살펴보기 위하여 휘발유 대비 물성이 상이한 연료를 선정하여 연소특성을 살펴보았다. 실험은 각 연료에 맞는 점화시기 및 공연비제어를 수행하여 물성변화에 따른 최적의 점화시기와 희박연소에 에서의 연소특성을 살펴보았으며, 그에 따른 배출가스도 평가하였다. 실험을 위해 단기통 엔진을 사용하였으며, 휘발유 물성변화를 위해 "석유 및 석유대체사업법"에 고시된 품질기준을 벗어나는 가짜연료를 선정하여 실험을 수행하였다. 그 결과 선정된 연료의 경우 옥탄가와 증류성상, 증기압에서 차이를 보였으며, 불안정 연소 및 다량의 유해배출가스를 유발함을 알 수 있었다.

• 한국연소학회지
• /
• 제17권4호
• /
• pp.11-20
• /
• 2012

The Blow-off characteristics of LPG/air lean pre-mixed flames were experimentally investigated using a double and a multiple concentric coflow burners. Experiments were conducted to understand the effects of recirculation motion, thermal interaction between flames, and stratified flame configuration. Here, the stratified premixed flame is a "new concept" of a flame that sequentially contains fuel rich, stoichiometric, and fuel lean reaction zones in a flame. The blow-off from a lean premixed flame was significantly suppressed with recirculation motion. The recirculation motion by itself, however, was not sufficient to prevent the blow-off when the equivalence ratio became low. The existence of a inner premixed flame could also help to prevent the blow-off of lean premixed flame; however, the blow-off suppression effect was rather diminished by weakened recirculation motion with the presence of inner flame. The inner flame could be separated from an outer flame on a multiple concentric coflow burner, causing recirculation motion as well as thermal interaction between flames to become effective; therefore, the blow-off was further suppressed. The lean premixed flame could be stabilized with a fuel rich premixed flames that was produced with the supply of fuel through an inner nozzle. The penetration of lean premixed gas from outside into the fuel stream produced a lifted rich premixed flame. Chemiluminescence images of OH, CH, and $C_2$ radicals confirmed the structure of a stratified premixed flame. The stable premixed flames could be obtained at the very fuel lean condition by applying the stratified premixed flame concept.

• 산업경영시스템학회지
• /
• 제30권1호
• /
• pp.96-104
• /
• 2007

Glass melting process is influenced by both control and observation factors, where control factors include quantity and mixing ratio of raw material, the amount of fuel and air in-take. Further observation factors include temperature and pressure at each step of process inside glass melting furnace. Ambient Control is an effective means to eliminate complications from excessive variation among raw materials, or external disturbance from wide fluctuation of environment around equipments. Ambient Control uses both control and observation factors mentioned above. This study suggests an effective Proactive Control System that can enable genuine 4M standardization in glass melting furnace by applying Ambient Control.

• 한국자동차공학회논문집
• /
• 제12권6호
• /
• pp.38-45
• /
• 2004

This paper studies the effects of intake port configuration on the swirl that is key parameter in the flow field of direct injection diesel engines. In-cylinder flow characteristics is known to have significant effects on fuel air mixing, combustion and emissions. To investigate the swirl flow generated by various intake ports, steady state flow tests were conducted to evaluate the swirl. Helical port geometry, SCV shape and bypass were selected as the design parameters to increase the swirl flow and parametric study was performed to choose the optimal port shape that would generate a high swirl ratio efficiently. The results revealed that a key factor in generating a high swirl ratio was to suitably control the direction of the intake air flow passing through the valve seat. For these purposes, we changed the distance of helical and tangential port as well as installed bypass near the valve seat and the effects of intake port geometry on in-cylinder flow field were visualized by a laser sheet visualization method. From the experimental results, we found that the swirl ratio and mass flow rate had a trade off relation. In addition, the result indicates that the bypass is a effective method to increase the swirl ratio without sacrificing mass flow rate.

• 한국자동차공학회논문집
• /
• 제21권6호
• /
• pp.135-146
• /
• 2013

This paper presents a feedforward control algorithm for the EGR and VGT systems of passenger car diesel engines. The air-to-fuel ratio and boost pressure are selected as control indicators and the positions of EGR valve and VGT vane are used as control inputs of the EGR and VGT controller. In order to compensate the non-linearity and coupled dynamics of the EGR and VGT systems, we have proposed a non-linear model-based feedforward control algorithm which is obtained from static model inversion approach. It is observed that the average modeling errors of the feedforward algorithm is about 2% using stationary engine experiment data of 225 operating conditions. Using a feedback controller including proportional-integral, the modeling error is compensated. Furthermore, it is validated that the proposed feedforward algorithm generates physically acceptable trajectories of the actuator and successfully tracks the desired values through engine experiments.

• 대한기계학회논문집B
• /
• 제24권9호
• /
• pp.1247-1254
• /
• 2000

The effects of recirculated exhaust gas on the characteristics of $NO_x$ and soot emissions under a wide range of engine load have been experimentally investigated by a water-cooled, four-cylinder, indirect injection, four cycle and marine diesel engine operating at two kinds of engine speeds. The simultaneous control of $NO_x$ and soot emissions in diesel engines is targeted in this study. The EGR system is used to reduce $NO_x$ emissions, and a novel diesel soot removal device with a cylinder-type scrubber for the experiment system which has 6 water injectors(A water injector has 144 nozzles in 1.0 mm diameter) is specially designed and manufactured to reduce the soot contents in the recirculated exhaust gas to intake system of the engines. The intake oxygen concentration and the mean equivalence ratio calculated by the intake air flow and fuel consumption rate, and the exhaust oxygen concentration measured are used to analyse and discuss the influences of EGR rate on $NO_x$ and soot emissions. The experiments are performed at the fixed fuel injection timing of $15.3^{\circ}$ BTDC regardless of experimental conditions. It is found that $NO_x$ emissions are decreased and soot emissions are increased owing to the drop of intake oxygen concentration and exhaust oxygen concentration, and the rise of equivalence ratio as the EGR rate rises.

• 수산해양기술연구
• /
• 제52권1호
• /
• pp.65-71
• /
• 2016

Injection rate, injection quantity and injection timing of fuel are controlled precisely by electric control in CRDI system. Particularly, injection rate being influenced with injection pressure affects to spray characteristics and fuel-air ratio, so it is a very important factor in diesel combustion. In this study, injection rates in accordance with injection pressure at a constant ambient pressure were measured with Zeuch's method. Under the same condition, non-evaporating spray images were taken with a high speed camera and analyzed carefully with Adobe Photoshop CS3. Macroscopic spray characteristics and breakup processes in the spray could be found from the examined and analyzed data. Injection start time and injection period were practically affected with injection pressure. Also, initial injection rate, spray penetration, spray angle and breakup of high density droplets region in the spray were affected with injection pressure. The results and techniques of spray visualization and injection rate measurement in this study would be practically effective to study a high pressure diesel spray for common rail direct injection system.

• International Journal of Automotive Technology
• /
• 제4권3호
• /
• pp.109-117
• /
• 2003

The analysis and evaluation of the transient performance by the transient response specifications under various acceleration speeds and types based on driver's typical acceleration habit are implemented by the experimental study to provide the appropriate direction for the transient control in a gasoline engine. The concept of the transient response specifications which consist of delay time, rising time, maximum overshoot and settling time, and the analysis method using them are introduced to evaluate the characteristics of the transient performance quantitatively. Furthermore four acceleration speeds and four acceleration types are set respectively to realize the various transient states which are similar to the real drive. Several performance parameters in terms of engine speed, manifold absolute pressure, fuel injection duration and air excess ratio are measured simultaneously during the various acceleration using a throttle actuator controlled by a PC. The transient response specifications characterized well the transient performance for the various acceleration speed and types quantitatively. Delay and rising time with increment of the acceleration speed became shorter, but settling time did longer. Intensified acceleration type appeared to be the most economical in view of fuel consumption, and linear acceleration type was found to have the least harmful emission concentration.

• 에너지공학
• /
• 제25권3호
• /
• pp.41-50
• /
• 2016

본 연구에서는 옥탄가에 따른 연소특성 및 차량 성능에 미치는 영향을 살펴보기 위하여 옥탄가 차이가 있는 두 연료를 선정하여 연소특성 및 배출가스, 연비, 가속성 실험을 수행하였다. 우선, 연소특성 실험을 위해 단기통 엔진을 사용하였으며, 시중에 유통되는 연료 중 옥탄가가 다른 두 연료를 선정하여 수행하였다. 단기통 실험은 각 연료에 맞는 점화시기 및 공연비제어를 통해 점화시기를 점차 진각 시켰을 때 나타나는 연소 특성을 살펴보았으며, 그에 따른 출력 및 배출가스, 연소압력 등을 통해 옥탄가에 의한 연소 상관성을 살펴보았다. 또한, 실제 차량을 통해 옥탄가 차이에 대한 연비 변화를 비교해 보았으며, 가속성 시험을 통해 고성능 요구 구간에 대한 옥탄가의 영향성을 살펴보았다. 그 결과 점화시기를 진각시킴에 따라 높은 옥탄가의 연료가 다소 안정된 연소특성을 보여주었으며, 가속성, 출력시험에서는 약간의 증가를 보였다. 그러나 두 연료 모두 도심 및 고속도로를 모사한 현행 연비모드에서 큰 차이를 보이지 않음에 따라 현재 판매되고 있는 차량의 운행 조건에서는 고옥탄가 연료가 연비에 미치는 영향은 미미한 것으로 나타났다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.88-92
• /
• 2009

초음속 추진기관은 기계적인 압축기를 통해 흡입공기를 압축하는 방식이 아니라 램 압축 현상을 이용하여 흡입공기를 압축하기 때문에 흡입구에서의 전압력 회복율이 초음속 추진기관 전체의 작동특성에 결정적인 영향을 주게 된다. 제어기 설계에 앞서 엔진의 동특성 해석을 수행한 결과 비행체의 받음각이 커질수록 버즈마진 값이 작아져 일부영역에서는 충격파가 흡입구 외부에서 발생하게 됨을 확인할 수 있었다. 따라서 흡입구 내의 충격파 특성이 성능요구조건을 만족할 수 있도록 버즈마진을 제어하기 위한 PID 제어알고리즘을 설계하였다. 제어변수는 연료유량과 노즐 목면적이며 버즈마진 값이 양의 값을 갖도록 PID 제어기를 설계하였다.