• Environmental Engineering Research
• /
• v.23 no.3
• /
• pp.258-264
• /
• 2018

The objectives of this research were to 1) isolate and identify thermophilic bacteria for food waste treatment; 2) investigate the capability of food waste treatment using Bacillus species; and 3) develop air-dried Bacillus starters for food waste treatment. Five Bacillus species were isolated from food wastes and identified as Bacillus licheniformis (B. licheniformis) G1, Bacillus circulans C2, Bacillus subtilis (B. subtilis) E1, Bacillus vanillea F1, and Bacillus atrophaeus G2 based on 16S rDNA sequencing. Each identified Bacillus and the mixture of Bacillus species were cultivated in the standard food waste at $45^{\circ}C$ for 8 d. Changes in cell count, solid contents, and pH of the food waste were monitored during cultivation. Air-dried Bacillus cell powders were prepared using wheat flour and lactomil as excipients, and the cell count and survival rate were determined. The cell count of B. licheniformis G1 exhibited the highest number among the tested Bacillus (${\sim}10^8CFU/mL$). The greatest reduction in solid contents of food waste was achieved by B. subtilis E1 (22.6%). The mixture of B. licheniformis G1 and B. subtilis E1 exhibited a synergistic effect on the reduction of solid contents. Lactomil was determined as better excipient than wheat flour based on the greatest survival rate of 95%.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.413-422
• /
• 2000

Samples of banana were dried in a two-stage heat pump dryer capable of producing stepwise control of the inlet drying air temperature while keeping absolute humidity constant. Two stepwise air temperature profiles were tested. The incremental temperature step change in temperature of the drying air about the mean air temperature of 30 $^{\circ}C$ was 5 $^{\circ}C$. The total drying time for each temperature-time profile was about 300 minutes. The drying kinetics and color change of the products dried under these stepwise variation of the inlet air temperature were measured and compared with constant air temperature drying. The stepwise air temperature variation was found to yield better quality product in terms of color of the dried product. Further, it was found that by employing a step-down temperature profile, it was possible to reduce the drying time to reach the desired moisture content.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.9
• /
• pp.1573-1579
• /
• 2004

This study was conducted to develop intermediate material for new processed food from sweet pumpkin. Osmotic dehydration was carried out as pretreatment before drying. After the sweet pumpkins were pretreated under optimized osmotic dehydration conditions, they were dried by three drying methods (hot air drying, vacuum drying and cold air drying). The moisture contents of dried sweet pumpkin products by osmosis treatment (sucrose) and hot air drying, vacuum drying, and cold air drying were 14.48, 14.09 and 13.87%, respectively. Cold air drying preserved more vitamin C content and showed lower color difference than hot air drying and vacuum drying. As a result of microscopic analysis, cold air dried sweet pumpkin was observed regular tissue, while hot air and vacuum dried sweet pumpkins were observed a cell collapse following the loss of water.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.784-791
• /
• 2015

Polyethylene glycol (PEG) impregnation prevents a red pine disk from cross-sectional checking during drying. Percentage of PEG Retention (PPR) was measured by the experimental methods of aceton extraction and moisture conditioning in a saturated salt solution and the effect of acetylation on PEG impregnated wood was investigated. PPRs of the kiln-dried specimens were much higher than those of the air-dried by at least four times and within the kiln-dried specimens those of the sapwood were higher that those of the heartwood by two times. These results were confirmed by the moisture conditioning experiment. Acetylation increased the weights of the kiln-dried specimens much less than those of the air-dried. It was revealed that acetic anhydride solution eluted PEG-1000 in the specimens. It is concluded that kiln-drying is more effective than air-drying for the increase of PPR and that acetylation eliminates the difference between the kiln- and air-dried specimens.

• Korean Journal of Food Science and Technology
• /
• v.21 no.1
• /
• pp.17-24
• /
• 1989

Effects of cooking and drying methods on the lipids content and neutral lipid component of shrimp, Metapenaeus joyneri, were investigated. Total lipid content of the fresh shrimp was 6.0%(dry basis), which was not changed significantly depending on the cooking and drying methods. Lipid of the fresh shrimp was composed of 36.8% of neutral lipids, 21.5% of glycolipids, and 41.7% of phospholipids. Freeze dried shrimp was substantially higher in neutral lipid contents but lower in glycolipid and phospholipid contents than hot air dried one. Main components of the neutral lipids were triglycerides, free sterols, free fatty acids and esterified sterols. Freeze dried shrimp contained higher triglycerides contents than hot air dried shrimp, whereas free fatty acids content in hot air dried shrimp was greater than that of freeze dried one due to the decomposition of triglycerides to free fatty acids during hot air drying. Major fatty acid composition of the total lipid were palmitoleic acid, eicosapentaenoic acid and docosahexaenoic acid, and that of neutral lipid were palmitic acid, palmitic acid, oleic acid, eicosapentaenoic acid and docosahexaenoic acid in fresh shrimp.

• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.328-341
• /
• 1995

I. Shear Bond Strength to Air-dried and Remoistened Dentin.. The effect of air-drying and remoistening of acid-conditioned dentin before priming with the primer of All-Bond 2(BISCO. INC., U. S. A.) on shear bond strength(SBS) was investigated. Ninty freshly extracted sound human molars were divided at random into 9 groups of 10 teeth each. SBSs were meaured for acid-conditioned and non-conditioned dentin to which the primer and bonding agent of All-Bond 2 and composite resin(Z-100, 3M Dental Products, U. S. A.) were applied. The following values(Mean${\pm}$ SD, MPa) were obtained for the groups conditioned with 10% phosphoric acid for 15 seconds: Group l(blot dried) $6.7{\pm}4.1$ ; Group 2(10 seconds dried) $16.1{\pm}5.3$ ; Group 3(20 seconds dried) $15.4{\pm}4.8$ ; Group 4(30 seconds dried) $15.2{\pm}6.3$ ; Group 5(10 seconds dried/remoistened) $26.4{\pm}2.6$ ; Group 6(20 seconds dired/remositened) $22.2{\pm}2.7$ ; Group 7(30 seconds dried/remoistened) $21.5{\pm}4.1$. For the non-conditioned groups the values were: Group 8 (blot dried) $13.3{\pm}2.6$ ; Group 9(10 seconds dried) $12.9{\pm}3.5$. The data were analyzed using ANOVA. In the acid-conditioned groups, mean values of SBS for the air-dried specimens(Grps. 2, 3 and 4) and the 20 and 30 seconds dried/remoistened specimens (Grps. 6 and 7) were significantly lower than that of blot dried specimens.(p<0.05) The value for 10 seconds dried/remoistened specimens (Grp. 5), however, was not statistically different compared to that of blot dried specimens.(p>0.05) In the non-conditined groups, there was no statistical difference between blot dried and 10 seconds dried specimens.(p>0.05) The results suggest that the acid-conditioned dentin surface is more vulnerable to dentin bonding when it is air-dried or even remoistened after long period of drying. II. Shear bond stengh to the moistened and primed enamel. The effect of moistening and priming of enamel compared to the air-drying of enamel on the shear bond strength of enamel bonding agent was investigated. The experiment was divided into 4 groups each containing 10 caries-free maxillary incisor teeth. Shear bond strength values were measured for the primed and non-primed enamel to which All-Bond 2 and Z-100 were applied. The following values(MPa) were obtained for the primed groups pretreated with 32 % phosphoric acid for 15 seconds. : Group 1 (10 seconds dried) $29.8{\pm}2.2$ ; Group 2(moistened) $26.8{\pm}5.4$. For the non-primed groups the values were: Group 3(10 seconds dried/primed) $27.6{\pm}5.0$ ; Group 4(mostened/primed) $28.2{\pm}3.5$. The data were subjected to statistical analysis using ANOVA. The results showed that mean shear bond strengths among the experimental groups were not statistically different. (p>0.05) Conclusively, It is suggested that the bonding ability to enamel is not decreased by the moistening and priming of the enamel.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.4
• /
• pp.399-408
• /
• 2017

Research on the rapid and accurate prediction of physical properties of wood using near-infrared (NIR) spectroscopy has attracted recent attention. In this study, partial least squares analysis was performed between NIR spectra and air-dried specific gravity of five domestic conifer species including larch (Larix kaempferi), Korean pine (Pinus koraiensis), red pine (Pinus densiflora), cedar (Cryptomeria japonica), and cypress (Chamaecyparis obtusa). Fifty different lumbers per species were purchased from the five National Forestry Cooperative Federations of Korea. The air-dried specific gravity of 100 knot- and defect-free specimens of each species was determined by NIR spectroscopy in the range of 680-2500 nm. Spectral data preprocessing including standard normal variate, detrend and forward first derivative (gap size = 8, smoothing = 8) were applied to all the NIR spectra of the specimens. Partial least squares analysis including cross-validation (five groups) was performed with the air-dried specific gravity and NIR spectra. When the performance of the regression model was expressed as $R^2$ (coefficient of determination) and root mean square error of calibration (RMSEC), $R^2$ and RMSEC were 0.63 and 0.027 for larch, 0.68 and 0.033 for Korean pine, 0.62 and 0.033 for red pine, 0.76 and 0.022 for cedar, and 0.79 and 0.027 for cypress, respectively. For the calibration model, which contained all species in this study, the $R^2$ was 0.75 and the RMSEC was 0.37.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.6
• /
• pp.594-599
• /
• 2012

The objective of this study was to determine the processing conditions for salt dried rockfish Sebastes schlegeli by sun drying and cold-air drying, as measured by alcohol dehydrogenase (ADH) and acetaldehyde dehydrogenase (ALDH) activity. We processed salt dried rockfish samples. The salinity of rockfish samples was within 1% following salting with 25% salt brine for 3 h. The moisture content of salt dried rockfish was found to reduce linearly from 70.12 to 39.5 g/100 g over the same time interval. The water activities of salt dried rockfish by sun and cold-air drying were 0.94 and 0.87, respectively, after three days of drying. Acid values (AV) were 10.71 and 5.96 mg KOH/g, respectively, after the three day drying period. The ADH activity in a water extract from salt dried rockfish following sun and cold-air drying for 24 h was 228.5% and 226.1% at 13.3 mg/mL, respectively, and was higher than that when drying lasted for 48 and 72 h. The ALDH activity was not affected but both ADH and ALDH activity tended to decrease as the drying time increased from 24 to 72 h. The conditions of processing for the best quality of salt dried rockfish were determined to be drying with a cold-air system for 24 h. These results indicated that water extracts from salt dried rockfish have valuable biological attributes owing to the metabolizing of alcohol and can provide useful information for the design of drying systems for salt dried rockfish.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.388-395
• /
• 2000

This study was performed to examine the effects of infrared (IR)/heated-air combination drying on some quality attributes of Korean white ginsengs. Ginseng roots were dried in a dryer where both the far infrared ray and heated-air are available as drying energy sources. Diametral shrinkage, external color, total saponin content, and ginsenosides and free sugar composition of the IR/heated-air combination dried ginsengs were measured and compared with those of commercial white ginseng products. The external color became lower in lightness and higher in saturation as the IR radiating plate temperature increased. IR/heated-air combination dried white ginsengs at IR plate temperature of 100$^{\circ}C$ was comparable to the commercial white ginseng products in color characteristics. Diametral shrinkage ratios ranged from 20 to 36% and appeared to be independent on the different drying methods. No definite evidence could be found whether the IR/heated-air combination drying and the conventional. hot-air drying practice resulted in white ginsengs having different ginsenoside contents and compositions. No conclusion could be made on whether the various drying treatments used in the study had effects on the free sugar contents and compositions of white ginsengs.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.5
• /
• pp.503-508
• /
• 1991

The salted and dried mullet(Mugil Japonicus) roe had about 42% of protein and 41% of lipid content as major compoments. Therefore the lipid oxidation and the deterioration of protein occurred during drying and storage periods. In order to keep the good quality of the dried roe, acid, peroxide, thiobarbituric acid value and the contitutional amino acid were studied in the different drying air velocities at the conditions of 60% R.H. and $20^{\circ}C$ of drying air temperature. The optimum air velocity showed 2m/sec, which was excellently superior to the lipid and protein quality than those of other air velocities on the dried mullet roe. The drying period shortened from 20 days in the conventional processing method to 7 days in the modified processing method that had 2m/sec of drying air velocity. The drying rate curve had only a falling-rate drying period and not to have a constant-rate drying period.