• 제목/요약/키워드: Air to water

검색결과 6,142건 처리시간 0.034초

주방에서 건식 식기 세척기 설치 및 운전 사례연구 (A Case Study for Installation of Dry Washing Process in Kitchen)

  • ;김영철
    • 한국물환경학회지
    • /
    • 제23권3호
    • /
    • pp.391-396
    • /
    • 2007
  • 공기와 모래를 이용한 건식 식기세척기를 주방에 설치하여 운전하였다. 실험을 위하여 30여종의 양념(Dirt 마커) 과 14종의 접시를 사용하였으며 세척효율은 COD-MN에 의해 평가하였다. 건식 공기세척은 일부 양념에는 효과적이었으나 일부 양념에는 전혀 효과가 없는 것으로 분석되었다. 또한 건식공기세척을 통해서 양념의 완벽한 제거는 불가능하였다. 접시의 형태에 따라 세척효율에 큰 차이를 보였다. 모래와 공기에 의한 세척은 COD-MN 제거에 탁월한 성능을 보였다. 본 연구를 통하여 물을 사용하지 않고 모래와 공기에 의한 건식세척 방법이 가능함이 입증되었다.

붕적층내의 간극수압 반응에 관한 실험적 연구 (An Empirical Study on the Characteristics of Pore Water Pressure Reaction in Colluvium Model)

  • 정두영;최길렬
    • 한국지반공학회지:지반
    • /
    • 제8권2호
    • /
    • pp.59-70
    • /
    • 1992
  • 지질구조의 일례를 모형화하여 3종류 시료에 대해 간극수압계를 사용하여, 가압수두와 간극비 변화에 따른 간극수압 변화측정을 60회의 실험을 통하여 실시하였다. 본 연구는 불포화 붕적토층에서 간극비와 가압수두 변화에 따른 간극수압의 변화를 기록하여 최종간극수압 VWT와 공기간극수압 Ua를 구하여 이들의 변화를 최종반응률과 공기반응률로 나타냈으며, 시료별로 투수계수와 간극비의 관계를 수식화 하였다. 실험결과 시료에 따라 간극수압 변화 형태가 계단형과 파형으로 나타났으며, 최종간극수압까지의 시간 지체는 모래, 사질실트, 점토질 모래 순이었다.

  • PDF

Efficiency of Removal of Indoor Pollutants by Pistia stratiotes, Eichhornia crassipes and Hydrocotyle umbellata

  • Park, Hye-Min;Lee, Ae-Kyung
    • 인간식물환경학회지
    • /
    • 제23권1호
    • /
    • pp.15-21
    • /
    • 2020
  • In this study, we compared efficiency of different aquatic plants in removing indoor pollutants and examined their potential to purify indoor air. Two liter of water in chamber was used as the control, while the other chambers containing water lettuce (Pistia stratiotes), water hyacinth (Eichhornia crassipes), and water coin (Hydrocotyle umbellata) were used as treatment groups. Temperatures inside all the chambers were maintained between 20 ℃ and 23 ℃. Humidity in the chambers with aquatic plants increased by 30% and 50% control respectively. The removal of formaldehyde per unit leaf area was examined in each aquatic plant. It turned out that water hyacinth removed the highest amount of formaldehyde, followed by water lettuce and water coin. Both water hyacinth and water lettuce increased the amount of removal of formaldehyde until the end of the experiment. In the case of airborne dust (PM 10) and fine dust (PM 2.5), water coin, which had the highest number of leaves, removed more PM 10 and PM 2.5 than the other aquatic plants, with statistically significant difference. In addition, both water coin and water hyacinth smoothly opened and closed stomata before and after the experiment. Consequently, as the aquatic plants were effective in controlling humidity and removing pollutants, they can be used as air purifying plants.

백연 저감을 위한 열교환 시스템의 배기 열전달 특성에 관한 연구 (Study on Exhaust Air Heat Transfer Characteristics of Heat Exchange System for White Smoke Reduction)

  • 왕쩐후안;전종균;권영철
    • 한국기계기술학회지
    • /
    • 제20권6호
    • /
    • pp.739-744
    • /
    • 2018
  • In this study, effects of reducing white smoke at a heat exchange system for white smoke reduction were studied in the winter season. For this purpose, the heat transfer processes on the exhaust air were investigated by Solidworks. Five wave heat exchangers of air-to-air and air-to-water type were applied for the exhaust air heat recovery. The analytical condition of the exhaust air was fixed and the computational analysis was performed according to the change of SA(supply air) inlet velocities. In order to evaluate the performance of the heat exchange system for white smoke reduction, W(water)/SA recovered capacities and the temperature/absolute humidity reduction rate were calculated. As SA inlet velocity increased, the exit temperature and absolute humidity of the mixing zone were reduced by up to about $40^{\circ}C$ and 0.12kg/kg respectively. Also, W/SA recovered capacities increased linearly up to about 35%.

이중 순환식 유동층 연소로내에서 2차 공기 주입에 의한 CO, NOx 저감효과 (Effect of Secondary Air Injection on CO and NOx Emission in an Internally Circulating Fluidized Bed Combustor)

  • 장석돈;신동훈;황정호
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2002년도 제24회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.204-211
    • /
    • 2002
  • Combustion experiments are carried out to obtain the fundamental data for application of a internally circulating fluidized bed combustor to the combustion of paper sludge wastes. Experimental parameters are identified as secondary air ratio, sludge weight and water contents. The secondary air ratio was varied from 0 to 20% and water content was 14%, 25%, 35%, 45%, 62% and sludge weight was 30g, 60g, 90g. As a result, carbon conversion ratio was higher than injection of primary air. Emission of CO and NOx reduced with an increase of secondary air injection.

  • PDF

도로성토체로 사용된 실트질 계열의 경랑기포혼합토에 대한 물의 영향 (Effect of Water on the Lightweight Air-Mixed Soil Containing Silt Used for Road Embankment)

  • 황중호;안영균;김태형
    • 한국지반공학회논문집
    • /
    • 제26권2호
    • /
    • pp.23-32
    • /
    • 2010
  • 본 연구는 특별히 물과 관련된 실트질 계열의 경량기포혼합토(기포슬러리밀도 10kN/$m^3$ 대상)의 특성변화를 알아보기 위해 수행되었다. 일축압축강도, 투수계수, 모관상승고 등에 대한 연구가 이루어졌으며, 이들 연구를 뒷받침할 수 있는 경량기포혼합토의 미세구조에 대한 연구도 아울러 진행되었다. 사진을 통한 미세 구조 분석 결과 경량기포혼합토 내의 기포는 다양한 크기로 존재하며, 위치별 기포의 분포는 거의 일정한 것으로 밝혀졌다. 또한 기포 안에 아주 많은 미세한 공극들이 존재하여 물에 의해 경량기포혼합토가 포화상태에 가까이 도달될 수 있음이 밝혀졌다. 이미지를 이용한 간극률 산정도 같이 이루어졌다. 일축압축강도 시험 결과, 물에 의한 극한강도 값의 변화는 없으나 응력-변형거동에는 영향을 주는 것으로 나타났다. 경량기포혼합토의 투수계수는 평균 $4.857{\times}10^{-6}cm/sec$로 점토보다는 약간 큰 값을 갖는 것으로 나타났다. 경량기포혼합토의 모관상승은 시험초기부터 100분 이내에는 가파르게 진행되고, 그 이후 경과시간에 따라 상승속도가 점진적으로 완만하게 진행됨을 알 수 있다. 모관상승은 곧 재료의 단위중량 증가를 유발하므로 경량기포혼합토의 설계와 유지관리 시 각별한 주의가 요구된다.

Effects of Turbine Inlet Temperature on Performance of Regenerative Gas Turbine System with Afterfogging

  • Kim, Kyoung-Hoon;Kim, Se-Woong;Ko, Hyung-Jong
    • International Journal of Air-Conditioning and Refrigeration
    • /
    • 제17권4호
    • /
    • pp.141-148
    • /
    • 2009
  • Afterfogging of the regenerative gas turbine system has an advantage over inlet fogging in that the high outlet temperature of air compressor makes the injection of more water and the recuperation of more exhaust heat possible. This study investigates the effects of turbine inlet temperature (TIT) on the performance of regenerative gas turbine system with afterfogging through a thermodynamic analysis model. For the standard ambient conditions and the water injection ratios up to 5%, the variation of system performance including the thermal efficiency is numerically analyzed with respect to the variations of TIT and pressure ratio. It is also analyzed how the maximum thermal efficiency, net specific work, and pressure ratio itself change with TIT at the peak points of thermal efficiency curve. All of these are found to increase almost linearly with the increases of both TIT and water injection ratio.

물분사 폐열회수 보일러의 효용성에 대한 실험적 검증 (Experimental Validation on Performance of Waste-heat-recovery Boiler with Water Injection)

  • 신재훈;박태준;조현석;유준상;문석수;이창언
    • 한국분무공학회지
    • /
    • 제28권1호
    • /
    • pp.43-48
    • /
    • 2023
  • The waste-heat-recovery boiler with water spray (HR-B/WS) applies the heat exchange between the inlet air and exhaust gas with the water spray into the inlet air. The evaporation of water in the inlet air promotes heat recovery from the exhaust gas so that thermal efficiency can be improved by the enhanced condensing effect. The NOx emission can also be reduced by lowering the flame temperature due to the dilution effect of the water. In this study, the validity of this concept is examined by the practical boiler test performed with a 24 kW condensing boiler under the full load condition according to the water injection amount. The theoretical amount of water injection is calculated under the assumption of full evaporation of the sprayed water, which is calculated as 50 g/min. Since the injected water cannot evaporate fully in the actual system, the maximum water spray amount is set as 100 g/min. The results showed that the water injection can increase the thermal efficiency up to 95.59% and reduce NOx and CO emissions simultaneously to 8.9 ppm and 35 ppm at 0% of O2. Although the heat energy loss increased due to the unevaporated water, the increase in water injection amount caused higher thermal efficiency due to the increased amount of the evaporated water.

외기 온도 변화가 핀-관 열교환기의 공기측 열전달계수와 마찰계수에 미치는 영향에 관한 실험적 연구 (An Experimental Study on the Effect of the Air Temperature on the Air-Side Heat-Transfer Coefficient and the Friction Factor of a Fin-and-Tube Heat Exchanger)

  • 김내현;조홍기
    • 설비공학논문집
    • /
    • 제29권4호
    • /
    • pp.149-158
    • /
    • 2017
  • In general, the air-side j and f factors of evaporators or condensers are obtained through single-design tests performed under air-dry and wet-bulb temperatures. Considering that the indoor or outdoor air temperatures vary significantly during the operation of an air conditioner, it is necessary to confirm that the experimentally-obtained j and f factors are widely applicable under variable air conditions. In this study, a series of tests were conducted on a two-row slit-finned heat exchanger to confirm the applicability. The results showed that, for the dry-surface condition, the changes of the tube-side water temperature, water-flow rate, and air temperature had virtually no effect on the air-side j and f factors. For the wet condition, however, the f factor was significantly affected by these changes; contrarily, the j factor is relatively independent regarding this change. The formulation of the possible reasoning is in consideration of the condensation behavior underneath the tube. The wet-surface j and f factors are larger than those of the dry surface, with a larger amount for the f factor.