• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2008.04a
• /
• pp.162-163
• /
• 2008

• Journal of Environmental Impact Assessment
• /
• v.16 no.4
• /
• pp.267-275
• /
• 2007

In this study, relationship between the air pollution of Siheung city and the relative contribution of automobiles to the city's pollution was evaluated for the first time. Then, new air pollution exposure index was developed through simulation. Using the newly developed index, two different urban development scenarios were compared to present a sustainable urban development plan to reduce air pollution from the land utilization point of view. According to the result of this simulation, air quality of the city was found to be affected significantly by human activities. More populated area showed worse level of air quality. Any development in the city resulted in more automobile activity and deterioration of air quality. This simulation result thus explains that a rapid increase of automobiles accompanied by the land development near local roadsides in the city is the major cause of air pollution in Siheung city. In this study, if urban activities are vigorous in an area with high air pollution, people are more likely to be exposed to air pollutant under the bad environmental conditions. On the other hand, if urban activities are less vigorous in an area with high pollution or if urban activities are vigorous in an area with less pollution, the environmental condition was positive. The APEI (Air Pollution Exposure Index) was developed based on these considerations. Scenarios 1 and 2 were compared and analyzed using APEI. In result, scenario 1 is the case in which land is developed and used in an environmentally favorable manner. From this study, it was proved that the impact of air pollution on human health can be minimized with proper land use. The result form the current study can be used as the basic information to solve problems from improper land utilization and air pollution (by road traffic). It also can be utilized to evaluate air pollution level according to land use and road characteristics and to help to choose the best location of land use to comply with the road function and status.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.2
• /
• pp.112-121
• /
• 2006

To evaluate the performance of ventilation system properly, the correlations among the ventilation rate, indoor air-quality and cooling/heating load should be analysed. In this study, simulation tool to analyze the performance of ventilation system was developed. The simulation tool is based on the TRNSYS and some modules to calculate concentration of pollutants with the operation of ventilation system and to decide the signal of ventilation system were newly developed in this study. And these modules coupled with building load and heating/cooling simulation modules. To verify the validity of developed simulation tool, comparison study between simulation and field study were accomplished. As results, the simulation tool developed in this study can be used to predict the performance of ventilation system with accuracy.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.6
• /
• pp.827-841
• /
• 1999

The air quality simulation models in wide use for air quality impact assessmetns are reviewed. After an intensive survey and comparative study upon the environmental impact assessment reports submitted to Ministry of Environment during 1990~1998, we could identify the major common problems with the air quality impact assessment procedures. Several remedies are presented here, including use of the screening models applicable to the complex terrain.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.04a
• /
• pp.185-186
• /
• 1999

• Journal of Korean Society for Atmospheric Environment
• /
• v.2 no.1
• /
• pp.81-90
• /
• 1986

Hanna - Gifford Model and Air Quality Display Model(AQDM) were validated in the simulation of $SO_2$ and TSP concentrations of Seoul City. The observed data which were measured at 16 sites of air monitoring system conducted by Seoul metropolitan city in 1984 were compared with the simulated data and the results were obtained as follows; 1. Several different meteorological data were examined: The particularities of meteorological data was not an influencing factor in the validity of simulation. The simulations of $SO_2$ by Hanna - Gifford model and by AQDM showed close correlation coefficients between the observed data and the simulated data (r = 0.71 - 0.78). 2. The simulation models showed different validities with the seasonal variation: The correlation coefficients (r) between the observed and the simulated by Hanna - Gifford Model for $SO_2$ and TSP were 0.86 and 0.80 in Spring, 0.63 and 0.66 in Summer, 0.76 in Autumn and 0.81 and 0.93 in Winter respectively. Those by AQDM were 0.73 and 0.68 in Spring, 0.56 and 0.79 in Summer, 0.77 and 0.76 in Autumn and 0.64 and 0.68 in Winter respectively. 3. The simulated data by two models had a close relationships: The correlation coefficients between them were 0.96 for $SO_2$, and 0.93 for TSP. With the above results, the application of models was discussed; Hanna - Gifford model was less valid in the simulation for the air quality of $SO_2$ and TSP in Seoul in Summer and AQDM also was not valid for $SO_2$ in Summer and in Winter and for TSP in Spring.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.4
• /
• pp.407-438
• /
• 2013

Current status and future direction of air quality modeling for monitoring and forecasting air quality in East Asia were discussed in this paper. An integrated air quality modeling system, combining (1) emission processing and modeling, (2) meteorological model simulation, (3) chemistry-transport model (CTM) simulation, (4) ground-based and satellite-retrieved observations, and (5) data assimilation, was introduced. Also, the strategies for future development of the integrated air quality modeling system in East Asia was discussed in this paper. In particular, it was emphasized that the successful use and development of the air quality modeling system should depend on the active applications of the data sets from incumbent and upcoming LEO/GEO (Low Earth Orbit/Geostationary Earth Orbit) satellites. This is particularly true, since Korea government successfully launched Geostationary Ocean Color Imager (GOCI) in June, 2010 and has another plan to launch Geostationary Environmental Monitoring Spectrometer (GEMS) in 2018, in order to monitor the air quality and emissions in/around the Korean peninsula as well as over East Asia.

• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.167-175
• /
• 2013

PURPOSES : The objective of this study is to investigate the capability of the combined model of traffic simulation, emission and air dispersion models on the impact analysis of air quality of mobile sources such as vehicles. METHODS : The improvement of the quality of life brings about the increasing interest of the public environment. Many endeavors including the travel demand management, the application of the state-of-the-art ITS technologies, the promotion of eco-friendly vehicles have been tried in transportation area to reduce the modal emissions. Especially, it is expected that the increasing number of eco-friendly vehicles in the road network would be able to reduce the pipe-tail emissions tremendously. From this perspective, we have performed a study on the impact analysis of the popularization of the eco-friendly vehicle in the place of the fossil fuel energy powered vehicles on the surrounding air quality using the combined framework of microscopic traffic simulation, emission and air dispersion model. RESULTS : The combined model successfully captured the effect of moving to the eco-friendly vehicles on the air quality, and the results showed that the increasing usage of eco-friendly vehicles can improve the surrounding air quality tremendously and that the air dispersion model plays a crucial role in the investigation of the air quality change around the main corridor. CONCLUSIONS : This study demonstrated the capability of the combined model showing the spatio-tempral change of emission concentration.

• Agricultural and Biosystems Engineering
• /
• v.3 no.2
• /
• pp.65-72
• /
• 2002

Temperature is the most influential environment parameter which affects the quality change of agricultural products in cold storage. Therefore, it is essential to keep the uniform temperature distribution in the storage room. This study was performed to analyze the air movement and temperature distribution in the forced recirculating cold storage facility and to simulate optimum storage method of green groceries using 3-D CFD(three dimensional computational fluid dynamics) computer simulation which applied the standard $textsc{k}$-$\varepsilon$ turbulence model and FVM(finite volume method). The simulation was validated by the experimental results for onion storage and the simulation model was used to simulate the temperature and velocity distribution in the storage room with reference to the change of storage method such as location of storage, no stores, bulk storage, and pallet storage. In case of no stores, internal airflow was circulated without stagnation and consequently air movement and temperature distribution were uniform. In case of bulk storage, air movement was stagnated so much and temperature distribution of onion was not uniform. Furthermore, the inner temperature of onion roses more than the initial temperature of storage. In case of pallet storage, air movement and temperature distribution of onion were so uniform that the danger of quality change was decreased.

• KIEAE Journal
• /
• v.4 no.3
• /
• pp.203-210
• /
• 2004

This dissertation identifies and investigates the possible control modes of hybrid ventilation system in applying to general apartments. It evaluates range of hybrid ventilation control modes in terms of indoor air quality, thermal comfort, and energy consumption in a living room and a kitchen of the $1000m^2$ apartment. The TRNSYS simulation program was used for evaluating the following four ventilation types : A ventilation mode relying on only infiltration for supplying air, A natural ventilation mode considering with weather condition, A hybrid ventilation (natural + mechanical ventilation) mode allowing minimum ventilation with no heat exchange, and a hybrid ventilation mode with heat exchange. This study shows the following results. As temperature being controlled by heating cooling equipments, there is without significant difference in thermal performance among ventilation types. Regarding Indoor Air quality, Indoor air contamination level of the hybrid ventilation case consistently keep the lower levels. The hybrid ventilation modes consume more energy by a 49% as compared to the A ventilation mode relying on only infiltration for supplying air. It is caused by the continuous ventilation for keeping good indoor air quality; the increase of energy consumption can be attributable to the increase of the heating energy. Therefore, the heat exchange between indoor and outdoor air is required during heating season in severe weather conditions. During the cooling seasons, Introducing natural ventilation can achieve energy saving by 40 ~ 45%. Thus, it can be an effective strategies for energy saving. Based on these results, a hybrid ventilation system can be suggested as an effective ventilation strategy for archiving high level of indoor air quality, thermal comfort, and energy consumption.