• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.877-880
• /
• 1999

A rigorous formulation is suggested〔l,2,3〕 in solving the scattering of plane waves by a dielectric wedge. Correcting surface currents are expanded in a Neumann series of fractional orders to meet the edge condition of static limit〔4〕. For the better converging series, the modified Neumann series satisfying the static limit edge condition and the radiation condition are suggested here for the surface currents having two different wave numbers of air and dielectric〔4〕. This representation gives accurate solutions over the whole region including the grazing incidence of the plane waves upon the dielectric wedge of large permittivities.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1203-1208
• /
• 2009

In this paper, the flow characteristics of the mixed-flow pump impellers and diffusers were numerically predicted by commercial CFD software and DOE(design of experiments). We also discussed how to improve the performance of the mixed-flow pump by designing the impeller and diffuser in the mixed-flow pump. Geometric design variables were defined by the vane plane development which indicates the blade-angle distributions and length of the impeller and the diffusers. Firstly, the design optimization of the defined impeller geometric variables has been done. After that, the flow characteristics were analyzed in the point of incidence angle at the diffuser leading edge for the optimized impeller. Then design of the defined diffuser shape variables has been performed. The reason for the performance improvement was discussed by examining the flow characteristics through the diffuser.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.1 no.1
• /
• pp.17-22
• /
• 2004

The goal of this paper is to improve the position control performance of pneumatic rotary actuator with variable brake using Magneto-Rheological Fluid. The air compressibility and the lack of damping of the pneumatic actuator bring the dynamic delay of the pressure response and cause the oscillatory motion. In this study, a variable rotary brake comprising Magneto-Rheological Fluid is equipped to the joint of a pneumatic manipulator. Experiments of step response have proved that the transient response of the manipulator could be improved compared with that of the conventional control algorithm by using a phase plane switching control algorithm.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.4
• /
• pp.107-114
• /
• 2003

This study was performed to develop the plantable concrete block using rice straw ash and apply for inclined plane. For the planting, plantable concrete block needs infiltration of water and air through void of block. The materials used for plantable concrete block are cement, rice straw ash, and coarse aggregate (5-10, 10-20 mm). Plantable block size is $23\times23\times4$ cm, and species of planting are Tall fescue, Lespedeza cyrtobotrya and Lespedeza cuneata. At the 6 months after seeding, germination ratio and grown-up length of Tall fescue, Lespedeza cyrtobotrya and Lespedeza cuneata are shown in 90%, 60%, 50%, and 40~50 cm, 90~120 cm, 60~75 cm, respectively.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2120-2122
• /
• 1999

$SF_6$ gas has been widely used the gas insulated transmission line, gas insulated transformer and gas insulated substation and Polyester film used as the turn insulation with other material. $SF_6$ gas has been actively studied in domestic and foreign countries. In general, when dielectric surface electric field exceed any electric field strength on air, corona discharge is occurred from the dielectric surface. This paper presents the insulation strength of turn insulation of $SF_6$-PET film studied under application of AC voltage, constitute of the plane to plane with PET Film. The results obtained in experimental are summarized that Partial Discharge Initial Voltage(PDIV) of turn insulation depend on gas pressure, but Breakdown Voltage(BDV) did not depend on gas pressure.

• Structural Engineering and Mechanics
• /
• v.24 no.6
• /
• pp.727-740
• /
• 2006

A simple plane-strain solution is derived in this paper for the functionally graded multilayered isotropic elastic cylinder under static deformation. The solution is obtained using method of separation of variables and is expressed in terms of the summation of the Fourier series in the circumferential direction. While the solution for order n = 0 corresponds to the axisymmetric deformation, that for n = 2 includes the special deformation frequently utilized in the upper and lower bounds analysis. Numerical results for a three-phase cylinder with a middle functionally graded layer are presented for both axisymmetric (n = 0) and general (n = 2) deformations, under either the traction or displacement boundary conditions on the surface of the layered cylinder. The solution to the general deformation case (n = 2) is further utilized for the first time to find the upper and lower bounds of the effective shear modulus of the layered cylinder with a functionally graded middle layer. These results could be useful in the future study of cylindrical composites where FGMs and/or multilayers are involved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9B
• /
• pp.1511-1517
• /
• 2000

A new slot-coupled back-to-back microstrip array antenna is proposed for using in the IMT-2000 base station or repeater antenna. This antenna is composed of symmetrical SSAIP(Strip Slot, Air Inverted Patch) It has bidirectional radiation pattern in horizontal plane and 22.5$^{\circ}$main beam squint in vertical plane. The analysis is based on the cavity model and the design is achieved using Ensemble. Experimental results for the radiation pattern and the return loss have shown that the direction of the main beam is about 21$^{\circ}$and the impedance bandwidth is approximately 22.9% Thus the proposed antenna is able to operate over both uplink and downlink frequencies in IMT-2000.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.6 no.1
• /
• pp.51-69
• /
• 1998

This paper was studied to present a model for the application of AHP to the selection of fighter planes. For this study, a questionnaire was developed in respect to the criteria of fighter plane and given to 70 reserved officers who had experienced as fighter pilots in Republic of Korean Air Force (ROKAF) to ask their opinions about the candidates for the next-generation fighter planes of the ROKAF. The AHP software developed by Korean Advanced Institute of Science Technology (KAIST) was used to process the data. The result was analyzed by the criteria of selecting military aircraft and the several alternatives for the next-generation fighter planes.

• Journal of the Korean Physical Society
• /
• v.73 no.10
• /
• pp.1512-1518
• /
• 2018

The problem of scalar wave scattering by a sphere on or near a planar substrate is analytically solved. The solution is a set of wave functions coming in the form of infinite series of spherical and plane waves. In air, the incident plane wave is either scattered by the sphere or reflected from the substrate. A part of these scattered or reflected waves propagate to the other object where it is reflected and scattered again. Such processes of scattering and reflection repeat in turn indefinitely to generate multiply scattered waves, which are represented in the corresponding terms in the infinite series. The term in the series can be arranged in a recognizable manner to explicitly reveal the involved process and the multiplicity of scattering.

• Plant Journal
• /
• v.15 no.3
• /
• pp.35-41
• /
• 2019

In this study, we investigated the effect of the generation of NOx and CO by adjusting the overfire air supply position and ratio using the boiler that was converted from coal burning to wood pellet boiler. When the amount of the overfire air is relatively increased, the amount of NOx is slightly decreased but CO is sharply decreased when burning at low excess air ratio (1.10) that is due to a small fuel particle size. However, NOx slightly increased when burning at high excess air ratio (1.33) due to the large fuel size, but CO was hardly affected. Also, When the amount of overfire air was same, The more supply position was concentrated to upper portion of the main combustor, the more NOx and CO was lowered. And in case of the excess air ratio was high, the generation of NOx and CO I can see that it keeps the level irrelevant to the amount of air for the second stage combustion.