• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.6
• /
• pp.788-793
• /
• 2017

This military aircraft requires the compatibility evaluation of armed installations in accordance with guidelines and standards. In order to ensure the influence of gas-air mixtures caused by gunfire of the supersonic aircraft, CFD analysis of internal and external flows was performed and the results carried out and discussed. The low velocity vortex was formed due to the shape of the Gun Port, after firing the gas-air mixture was evacuated to the outside flow, where it moved to the front of the aircraft and soon merged with the aircraft flow field.

• Atmosphere
• /
• v.24 no.2
• /
• pp.225-234
• /
• 2014

Analysis of the cause of death (Statistics Korea) showed that heat wave caused 442 deaths (21 per a year) from 1991 to 2011 in Korea. The number of summer heat-related deaths (heat disorders) increased exponentially as heat wave prolonged. In 1994 when the extreme heat wave prevailed, there were 92 heat-related deaths. Seasonally, heat-related deaths occurred most frequently in early August when air temperature is highest for a year, but it is frequent as well in late July when air temperature increases rapidly after withdrawal of Changma. The frequency of deaths by age has begun to increase from 40s and more than half of total deaths were occurred in the elderly (${\geq}60$). Except retired elderly, the most vulnerable group (job and age) was the elderly agricultural workers and the next was the jobless people in 40 s~50 s, assumed as homeless people. The most vulnerable regions were Hapcheon-gun, Uiryong-gun, and Sanchen-gun, which are inland rural area in Gyeongsang-do where the heat wave occurs most frequently in Korea. The heat-related death rate increased rapidly when air temperature exceeded $33^{\circ}C$ in both of the urban and rural area. Interestingly, the heat-related death were observed in the relatively lower temperature in the cities ($29^{\circ}C$), as compare to the rural area ($31^{\circ}C$).

• Journal of Welding and Joining
• /
• v.24 no.6
• /
• pp.13-20
• /
• 2006

Resistance spot welding is widely used for joining sheet metals in the automotive manufacturing process. Recently, servo-gun is used to increase the productivity and precise control the acting force. However, force control mechanisms have not been investigated with servo-guns until now. In this paper, it is proved that servo-motor current is proportional to torque and by experiment, experimental equation between servo-motor current and electrode force was derived. Algorithm for feedback control of electrode force was suggested using current measurement. In addition, applying soft touch method to this system the impact between electrode and specimen, which is the problem of air gun, could be reduced. Indentation made the force decrease in holding time of resistance spot welding. In order to overcome this problem, force compensation using the servo gun was used and it improved weld strength in good welding current range.

• Journal of Welding and Joining
• /
• v.22 no.4
• /
• pp.43-49
• /
• 2004

Conventional method for electrode force application in resistance spot welding(RSW) processes is to use pneumatic cylinder. However, due to its inherent problems in pneumatic power system such as compressibility of air and poor transient response characteristics, new electrode force system with servo control are recently introduced in RSW machine. This machine is called “servogun”. The purpose of this study is to evaluate performance of servogun in case of spot welding of aluminum alloy. Aluminum alloy(A5052) sheets are spot welded using pneumatic gun and servogun. Both results are compared by means of macro cross-section etching test and tensile shear strength test. Numerous previous research have reported nugget with many voids and cracks are not uncommon defects in spot welds with aluminum alloy. The experimental results show similar defects in case of pneumatic gun. In contrast, use of servogun considerably reduced generation of voids and cracks. In case of step-wise increased forging force at the end of welding cycle with servogun, crack-free and void-free nuggets have been observed. The performance of servogun has been also verified by series of tensile shear test. Higher strength values have been achieved with servogun in comparison to that of pneumatic gun.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.4
• /
• pp.340-346
• /
• 2014

There are many factors that contribute to hit probability of the gun shot of ground combat vehicles. Aiming accuracy is mainly affected by the dynamic state of the vehicle. The stabilization error of the turret under system vibration is one of the major factors that affect the aiming accuracy. The vibration of the vehicle is affected by both the state of the road and the speed of the vehicle. This paper analyzes the aiming accuracy of the gun equipped on the GCV when the vehicle drives on the different roads and at different speed. The vertical displacement and the pitch angle of the gun are calculated and the impact points of the target are calculated. Distribution of the impact points on the target is greatly influenced by the pitch rotation rather than vertical displacement. And this aiming errors result in the errors of point of impacts on the target after the bullet flies through the air under trajectory equations. The GCV is modeled using a half-car model with 6 D.O.F. and the specifications of the M2 machine gun are used in trajectory calculation simulation and the target is located in 1000 m away from the gun.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.231-232
• /
• 2006

The purpose of this study is to measure and evaluate the thermal conditions of large cruiser's cabin. As the result of this study, followings are cleared. The air volume supplied to the 2 types of cabins is quite diffenrent. Temperature differences in the Room A which is located A deck and supplied enough air volume is stable all around the cabin. But Room B which is located B deck and supplied comparatively small air volume has temperature distribution problems, like time-dependent differences, vertical differences. To serve more comfort and productivity of Room B, it is strongly recommended to do a T.A.B.(Testing, Adjusting and Balancing) for more air volume and/or to design new air flow path to make air stay longer.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.157-160
• /
• 2010

Management of indoor air quality of underground subway station is an important issue since the limited natural ventilation, limited sunshine incoming, and highly moistured atmosphere. The improvement in IAQ of platform is expected because most stations were installed with platform screen door currently, however, the poor air quality in tunnel might be affecting subway cabin indoor. In this study, we developed the air quality assessment model based on computational fluid dynamics. The geometry of air ventilation unit, seat, LCD monitors, and passengers were modeled using commercial software (Design Modeler) and fluid pattern and pollutants trajectories were analyzed by using CFX. We predicted the thermal comfort by predicted mean vote (PMV), distribution of CO2 and PM10 concentration. It is expected that this model can be used for the performance test of air cleaners which are under development.

• Journal of Information Technology Applications and Management
• /
• v.28 no.1
• /
• pp.83-93
• /
• 2021

The purpose of this study was to develop a personalized SMT (smart monitor target) game interface for game users who enjoy airsoft sports as individual purchases of SMT have increased since the advent of the untouched era. For this study, the UX (user experience) of the game interface was designed based on previous research. In particular, the personalized game service was reinforced by adding the CP (command post) of the SMT system that performs the home function of the console game, which was intended to help the user maintain immersed in the game in the personalized space of the SMT. Major design elements for the SMT game interface included layout, color, graphics, buttons, and text, and the interface design was proceeded based on them. After composing a grid with a layout in which the tab function was applied to the interface with a vertical three-segment structure and the outer margin value secured, the military camouflage pattern and texture were applied to the colored tone to perform graphics work. Targets and thumbnails were produced as illustrations using experts to ensure the consistency of the interface, and then function buttons and texts on each page were used concisely for intuitive information delivery. The design sources organized in this way were developed using the Unity engine. In the future, we hope that game user-centered personalized interfaces will continue to develop and provide differentiated services unique to SMT systems in the airsoft gun market.

• Journal of Trauma and Injury
• /
• v.24 no.1
• /
• pp.48-51
• /
• 2011

Powered by compressed air, a nail gun is an essential alternative tool to a hammer on any construction site. This useful machine launches nails at high speed, automatically embedding them in a piece of wood in only a fraction of a second. In spite of its convenience, life-threatening and fatal nail gun injuries can occur when a nail gun is misused, such as in a suicide attempt, or when the operator has insufficient training because combustion nail guns are capable of firing projectiles at velocities higher than 150 m per second. Although injuries by nail guns are rarely reported, there have been reports of nail gun injuries to the head and the trachea in Korea. In the emergency room, the authors experienced a patient injured by an accidental shooting of a nail gun while working in construction. In that accident, a nail penetrated the patient's cervical vertebra through the left cheek. This report is aimed at studying medical treatment for patients with penetrating injuries caused by nail guns.

• Journal of the Speleological Society of Korea
• /
• v.1 no.1
• /
• pp.17-22
• /
• 1975

The Kosudong-gul Cave at kosu-ri, Daegang-myon, Danyang-gun, Chung Chong Bug-do, Province was surveryed by this author on the 3rd of Nov. 1973, 6th of Jan. 1974, 30th of Aug. and 13th of Sept. 1975 through over several times field trips. Yoechon-gul Cave at Yoechon-ri, Gagok-myon, Danyang-gun, Chung Chong Bug-do, Province was surveyed by this author on the 30th of August, 1975. The enviromental factors of both caves checked the siftations for air temperature, water temperature, moisture and pH, as well as the faunae f both caves and ecollogically studieel them. Kosudong-gul Cave (1) The environmental factors checked was the same as table 1. (2) The fauna is 5 classes and 18 species and they classified as Troglobite......2 species-11.1％, troglophile.....5 species-27.7％, and trogloxene....11 species.-61.2％. Yochon-gul Cave (1)The environmental factor Checked was the same as table 2. (2) The fauna is 5 classes and 8 species and they classified as troglobite......1 species-11.1％, troglobite....4 species-44.4％ and trogloxene.....4 species-44.4%.