• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.4944-4949
• /
• 2012

The purpose of this paper is concerned with a development of air gun for use at work. A air gun is the tool to remove of cutting fluid and workpiece chip in industrial field used machine tool. And it generally is used to shoot a jet of compressed air. Worker must prepare respectively air gun for suction and shooting a jet of compressed air. Therefore we has developed new air gun. In this paper we research for design and analysis of it. The air gun is composed of body, pipe, opening and shutting unit, turning unit, air tube and elements for fabrication. The developed air gun is experimented to confirm the efficiency.

• Journal of ILASS-Korea
• /
• v.20 no.2
• /
• pp.70-75
• /
• 2015

Swirl flow in the gun type burner has an impact on the stabilization of the flame, improvement of the combustion efficiency. The swirl flow is created by the spinner which is inside the airtube that guide the combustion air. Gun type burner has generally the inner devices composed electronic spark plug, injection nozzle, combustion device adaptor, and spinner. These inner components change the air flow behavior passing through airtube. So, this study conducted the measurement using by hot-wire anemometer and analyzed effect of the swirl number of spinner on the exhaust air of gun type burner. Turbulence characteristics come up in this study was mean velocity, turbulence intensity, kinetic energy, shear stress and flattness factor of the air flow with the change of the distance of axial direction and tangential direction from the exit of the airtube.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.6
• /
• pp.522-529
• /
• 2017

Air gun shock system is used as an alternative energy source as part of the attempt to overcome the restrictions of economical expense and environmental damage, etc., due to the use of explosives for the UNDerwater EXplosion (UNDEX) shock test. The objectivity of this study is to develop the simulation technique of air gun shock test for the design of model-scale one for the near field non-explosive UNDEX test through its verification with full-scale SERCEL shock test result. Underwater blasting response analysis of full-scale air gun shock test was carried out using highly advanced M&S (Modeling & Simulation) system of FSI (Fluid-Structure Interaction) analysis technique of LS-DYNA code, and was verified by comparing its shock characteristics and behaviors with the results of air gun shock test.

• Journal of Welding and Joining
• /
• v.17 no.4
• /
• pp.1-5
• /
• 1999

Servo Gun은 기존의 일반적인 Spot용접Gun에서 가압 및 개방에 사용되는 Air Cylinder를 Servo Motor로 대치한 신개념의 Spot용접Gun으로 여러 가지의 우수한 기능과 특징을 가지고 있어 적 용범위의 확대가 기대되고 있다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.4
• /
• pp.62-72
• /
• 2007

The Gun-Oreinted Anti-Air Warfare(GOAAW) which is still one of the important weapon systems of the vessel like the patrol killer to confront air threats comprises the components of the combat system - Command & Control(C2), Ballistic Calculation Unit, Sensors and Guns. In this paper, the GOAAW process of the patrol killer combat system is analyzed with probability and simulated to evaluate the effectiveness and capability of the GOAAW. As a result of the simulation, the performance measures of the GOAAW are discussed in the functional and operational aspects of the combat system.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.3
• /
• pp.171-175
• /
• 2020

Studies in socioeconomic impacts of air pollution are inevitable to merge data of the air pollutant density, weather, and socioeconomic variables. Due to their spatiotemporal disparities in units, to combine these data are time and effort consuming generically. The data described in this article aims to provide the major variables of air pollution and weather at the Si-Gun-Gu level to meet the data needs from social science. The latest (August 2020) data distributed are the balanced panel of 250 Si-Gun-Gu in South Korea for 2001-2018. The weather variables in this data are directly applicable to other social science topics, which are not limited to air pollution research.

• Journal of Welding and Joining
• /
• v.23 no.3
• /
• pp.40-46
• /
• 2005

Air gun has been one of the good tools to press two sheet metals. However, it is not easy to control the acting force precisely. A Servo-gun is a good tool to control the acting force on the workpiece comparing with the air gun. Servo-gun has a higher tensile shear strength and lower indentation depth as well as smaller spatter. Dynamic resistance was obtained according to the acting force and welding current. As the acting force was changed during welding, the welding quality was increased.

• Journal of ILASS-Korea
• /
• v.19 no.2
• /
• pp.75-81
• /
• 2014

Swirl flow in the gun type burner has a decisive effect on the stabilization of the flame, improvement of the combustion efficiency, and also a reduction of NOx. This swirl flow is created by the spinner which is inside the airtube that guide the combustion air. Gun type burner has generally the inner devices composed nozzle adapter, spark gap ignitor, and spinner. These inner components change the air flow behavior passing through air tube. Meanwhile, turbulent characteristics of this air flow are important to understand the combustion phenomena in the gun type burner, because the mixture of fuel and air are depended on. However, nearly all of the studies have been analyzed the turbulent flow of simplified combustion formation without the inner devices. So, this study conducted the measurement using by hot-wire anemometer and analyzed turbulent flow characteristics of the swirl flow discharged from the air tube with inner devices. Turbulence characteristics come up in this study were turbulence intensity, kinetic energy and shear stress of the air flow with the change of the distance of axial direction from the exit of the air tube.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.37 no.2
• /
• pp.105-108
• /
• 2018

Recently matured silkworm powder was developed by RDA. In this study, the effect of pulverizing method on the particle size of matured silkworm powder was examined. FESEM was performed to observe the morphology and to measure the particle size of silkworm powder. Particle morphology of air-jet mill pulverized powder was round and smooth, however, those of roller-mill and hammer-mill pulverized mature silkworm was more harsh and square. Particle size was varied with pulverizing technique as follows; $1.1{\mu}m$ (air-jet mill), $10{\mu}m$ (roller mill), and $120{\mu}m$ (hammer mill), respectively. A proximate analysis results of air-jet mill powder showed that crude protein, crude lipid, crude fiber, and ash was 73%, 12%, 1.95%, and 3.4%, respectively. According to our results, air-jet mell technique might be used to make a tiny matured silkworm powder.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.365-366
• /
• 2010