• 설비공학논문집
• /
• 제5권1호
• /
• pp.44-54
• /
• 1993

This is an experimental study to identify the performance of air-to-air rotary heat exchanger with polyurethane foam matrix. The experimental apparatus including heating AHU(Air Handling Unit), cooling AHU, sensor chamber, and heat exchanger testing unit was designed and manufactured in this study. The performance of heat exchanger with porous polyurethane foam matrix was tested with variations of the density and the thickness of matrix, regulating the wind velocity and the rotational speed of matrix. The actual heat recovery effectiveness, air leakage rate, and pressure drop of heat exchanger were measured and analyzed.

• 한국추진공학회지
• /
• 제22권1호
• /
• pp.58-65
• /
• 2018

초고속 비행체의 성능을 향상시키기 위해 비행체 선두부에 대한 연구가 다양하게 수행되고 있다. 본 연구에서는 초음속 영역에서 역분사 공기 제트를 활용하여 유동 특성 및 항력 감소에 대한 실험 연구를 수행하였다. 고속카메라를 활용한 쉴리렌 가시화 방법으로 분사 유동을 가시화 하였으며, 토크센서를 이용해 분사 압력 조건에 따른 항력 변화를 측정하였다. 측정 결과, 분사 압력비 1.58 ~ 1.70 조건에서 비정상 상태의 유동이 정상 상태로 변화하였으며, 역분사 공기 제트의 분사 압력이 높을수록 항력이 감소하는 경향을 보였다.

• 설비공학논문집
• /
• 제16권4호
• /
• pp.390-396
• /
• 2004

A double-inlet pulse tube refrigerator was fabricated as a U-shape with $\Phi$19.0 mm${\times}$125 mm regenerator packed by #200 stainless steel mesh and $\Phi$12.7 mm${\times}$125 mm pulse tube. A pressure sensor was installed at the inlet of the regenerator and a differential pressure sensor was installed across the bypass. Amplitude of the pulsating pressure was independent of the opening of the orifice and the bypass valves. Helium flow through the orifice and the bypass was calculated based on the measured pressure. Energy loss through the orifice and the bypass was evaluated with the measured pressure and the calculated helium flow rate. The energy loss, which is equivalent to the refrigeration capacity at the cold end of the ideal pulse tube refrigerator, was mainly generated through the orifice. It was proportional to the opening of the orifice valve, but the real refrigerator displayed the best performance at the optimized opening of the orifice valve. This optimized performance of the tested pulse tube refrigerator can be explained by additional refrigeration losses. As an example, the shuttle heat transfer loss of the pulse tube was calculated from the measured experimental data.

• 설비공학논문집
• /
• 제20권7호
• /
• pp.508-516
• /
• 2008

Fault detection and diagnosis(FDD) system is beneficial in equipment management by providing the operator with tools which can help find out a failure of the system. An experimental study has been performed on fault detection and diagnosis method for a water chiller. Bayes classifier, which is one of classical pattern classifiers, is adopted in deciding whether fault occurred or not. Failure modes in this study include refrigerant leakage, decrease in mass flow rate of the chilled water and cooling water, and sensor error of the cooling water inlet temperature. It is possible to detect and diagnose faults in this study by adopting FDD algorithm using only four parameters(compressor outlet temperature, chilled water inlet temperature, cooling water outlet temperature and compressor power consumption). Refrigerant leakage failure is detected at 20% of refrigerant leakage. When mass flow rate of the chilled and cooling water decrease more than 8% or 12%, FDD algorithm can detect the faults. The deviation of temperature sensor over $0.6^{\circ}C$ can be detected as fault.

• 한국전자통신학회논문지
• /
• 제16권1호
• /
• pp.183-190
• /
• 2021

본 논문은 실내 공기질 개선을 위한 스마트 공기청정 시스템 구현 및 구동에 관한 연구이다. 최근 다양한 환경적 요인으로 인해 실내 공기질 오염에 따른 문제가 심각해지고 있다. 본 연구에서는 이와 같은 실내 공기질 오염의 문제점을 개선하기 위해, IoT 센서를 활용한 스마트 공기청정 시스템을 구현하고자 한다. 특히 공기질 오염도를 실시간으로 측정하고, 오염도에 따라 서로 다른 공기 정화 경로를 가변시켜 줄 수 있는 시스템을 제안하였다. 이를 통해 효율적인 공기질 개선 및 필터의 수명 연장, 시스템 에너지 저감 등을 검토하였다. 또한 실내 공기질 개선 시스템에 대한 기능을 구현하기 위해 주요 부품을 선정하였고, 시제품을 제작하여 동작성을 확인하였다. 최종적으로 선형엑츄에이터를 활용한 실내 공기질 개선 시스템의 구현을 통해, 공기질 개선에 대한 효용성을 검토하였다.

• KSBB Journal
• /
• 제10권2호
• /
• pp.126-130
• /
• 1995

초산발효 중 에탄올 농도를 On-line으로 측정하기 위해 막가스 센서를 개발하였다. 에탄올이 함유된 발효액은 실리콘막을 통해 투과되고 Carrier gas로 사용된 Synthetic air에 의해 운반되어 반도체형 가 스센서에 감지되도록 설계하였다. 이 때 실리콘막의 두께가 O.5mm이고 Carrier gas의 유속이 20ml/mim이었을 때 막가스 센서의 감도가 가장 높았다. 막가스센셔의 저항치는 측정하고자 하는 에탄올 농 도에 따라 변하였고 이 저항치는 전위차로 변환되어 출력되었다. 제작된 막가스센서의 Calibration CUf ve를 작성하였고 실제로 조업 중인 초산 발효조의 발효액 중 에단올 농도의 On-line 측정이 가능하였 으며 이를 Gas chromatography에 의한 분석치와 비교한 결과 에단올 농도가 $0∼70g/\ell$의 범위에서 서로 상관관계를 나타내어 이러한 막가스센서가 초산발효와 같은 여러 생물공정의 모니터링과 제어에 이용이 가능함을 확인하였다.

• 한국추진공학회지
• /
• 제14권2호
• /
• pp.54-62
• /
• 2010

본 논문에서는 고속 비행체의 공기유동 데이터 측정 시스템에 직접 적용이 가능하며 고 신뢰도를 갖는 유동 데이터 처리 알고리즘 개발에 대해 기술하였다. 과거 공기유동 데이터 획득시스템과는 다르게 전산유동해석(CFD)을 통해 미리 획득한 데이터를 적용한 알고리즘으로 전압력 측정이 필요 없이 충분 한 센서 여유(redundancy) 및 오류 검출기능을 지니고 있다. 개발된 알고리즘에 대한 검증은 상용 프로그램인 매트랩 및 시뮬링크를 사용하여 진행하였다.

• 센서학회지
• /
• 제15권6호
• /
• pp.442-448
• /
• 2006

Ultrasonic anemometers using pulse envelope detection-based method are standard instruments in most meteorological studies. In this paper, a new phase measurement method is tried to achieve the enhanced resolution without changing dimensions. The measurement sensitivity, dynamic range, and measurement speed of the new instrument are 0.2 mm/s, 13.3 m/s, and 13 measurements/sec, respectively. A graphic user interface is added to show the velocity and direction of the wind with the speed of sound and temperature of the wind in the 3 dimensional space. The new anemometer could be useful for the measurement of the air speed, the flow of fluids, and even air flow inside the downtown buildings.

• 설비공학논문집
• /
• 제25권5호
• /
• pp.246-254
• /
• 2013

Some characteristics of nitrogen-water slug flow were optically measured, in vertical acrylic tubes of 2, 5 and 8 mm diameter. Bubble velocity, bubble and unit cell lengths were measured, by analyzing the light intensity signals from two sets of dot laser-infrared sensor modules mounted along the transparent tubes. Optical images of the bubbles were also taken and analyzed, to measure bubble shapes and liquid film thickness. It was found that the measured bubble velocities were in good agreement with the empirical models in the literature, except for those measured under high superficial velocity condition in the 2 mm tube. Bubble length was found to be the longest in the 2 mm tube, being 4 to 5 times those of the other tubes. Liquid film was found to have developed early in the 2 mm tube, which made the blunt shape of the bubble head. Liquid film thickness in the 8 mm tube was measured at almost twice those of the other tubes.

• 소음진동
• /
• 제11권1호
• /
• pp.57-67
• /
• 2001

Proposed in this paper is a method of measurement of the flow rate in a pipe. The sound waves which are propagated within a pipe are characterized by that the wavenumber in the axial direction is changed according to the flow rate, and these characteristics are used in the present method of measurement of the flow rate. The amount of change in wavenumber of sound waves according to the flow rate can be obtained from the relationship among acoustic pressure signals within a pipe, which are measured by using a microphone array. The flow rate can be obtained by using the amount of change in wavenumber of sound waves and the relational equation of the flow rate. With respect to errors that can occur during the measurement of the flow rate, the types of errors and the method of correction of those errors are presented. This method of measurement of the flow rate has application limitation conditions due to the sensor interval, assumption of sound waves as plane waves, etc. The numerical simulation and experiments for measuring the flow rate of air in a pipe are performed in order to verify the applicability of this method of measurement of the flow rate. The experimental results are shown to be similar to those of the numerical simulation. And the flow rate measured is shown to be consistent with the actual value within 5% error bound.