• Journal of Energy Engineering
• /
• v.16 no.1 s.49
• /
• pp.32-39
• /
• 2007

Coal pyrolysis processes vary with the origin and rank of coal. It is difficult to generalize the characteristics of coal pyrolysis reaction because the process consists of numerous reactions including pyrolysis, gasification, and combustion. To find out the optimum process condition it is necessary to determine the condition fur each coal from the smatter scale experiment. In this study pressurized ($2kg_{f}/cm^{2}$) fluidized bed, low temperature ($735{\sim}831^{\circ}C$) gasification using Kideco coal was performed. The reaction condition and product gas composition were determined from the variables including steam flow rate, coal feed rate and air flow rate. Optimum reaction condition was determined from the concentrations of $H_{2}$, and CO in the product gas. The ratio of air/coal was 4.45 and that of steam/coal was 0.21 respectively. The concentrations of CO and $H_{2}$ decreased with the increase of $CO_{2}$. It is important to control the feed rates of coal and steam because the reaction temperature rapidly increased when the combustion reaction dominates over the gasification reaction. The concentrations of CO and $H_{2}$ were 18%, 17% respectively from the continuous operating condition.

• Journal of the Korean Society of Mechanical Technology
• /
• v.20 no.6
• /
• pp.917-923
• /
• 2018

The drinking water supply system applicable to the laying hen consists of air-water heat pumps, drinking water tanks, heat stroage tank, circulation pumps, PE pipes, nipples, and control panels. When the heat pump system has power of 7.7 to 8.7 kW per hour, the performance coefficient is between 3.1 and 3.5. The supply temperature from the heat pump to the heat stroage tank was stabilized at about $12{\pm}1^{\circ}C$, but the return temperature showed a variation of from 8 to $14^{\circ}C$. Stratified temperature in the storage tank appeared at $12.^{\circ}C$, $13.5^{\circ}C$ and $14.4^{\circ}C$, respectively. The drinking water supply temperature remained set at $15^{\circ}C$ and $25^{\circ}C$, and the conventional tap water showed a variation for $23^{\circ}C$ to $30^{\circ}C$. As chickens grow older, the amount of food intake and drinking water increased. $y=-0.0563x^2+4.7383x+8.743$, $R^2=0.98$ and the feed intake showed $y=-0.1013x^2+8.5611x$. In the future, further studies will need to figure out the cooling effect on heat stress of livestock.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.10
• /
• pp.1364-1373
• /
• 2012

Four crossbred (75% Holstein Friesian) lactating dairy cows, with an average live weight of $418{\pm}5$ kg and $36{\pm}10$ d in milk were randomly assigned according to a $2{\times}2$ factorial arrangement in a $4{\times}4$ Latin square design to evaluate the effects of cassava hay (CH) and rice bran oil (RBO) on feed intake, nutrient digestibility, ruminal fermentation, milk yield, and milk composition. Factor A was non-supplementation or supplementation with CH in the concentrate. Factor B was supplementation with RBO at 0% or 4% in the concentrate mixture. The four dietary treatments were (T1) control (Concentrate with non-CH plus 0% RBO; C), (T2) Concentrate with CH plus 0% RBO (CH), (T3) Concentrate with non-CH plus 4% RBO (RBO), and (T4) Concentrate with CH plus 4% RBO (CHRBO). The cows were offered concentrate, at a ratio of concentrate to milk production of 1:2, and urea-lime treated rice straw was fed ad libitum. Urea-lime treated rice straw involved 2.5 g urea and 2.5 g $Ca(OH)_2$ (purchased as hydrated lime) in 100 ml water, the relevant volume of solution was sprayed onto a 100 g air-dry (91% DM) straw, and then covering the stack with a plastic sheet for a minimum of 10 d before feeding directly to animals. The CH based concentrate resulted in significantly higher roughage intake and total DM intake expressed as a percentage of BW (p<0.05). Ruminal pH, $NH_3$-N, BUN and total VFA did not differ among treatments, while RBO supplementation increased propionate, but decreased acetate concentration (p<0.05). Furthermore, the population of total ruminal bacteria was significantly lower on the RBO diet (p<0.05). In contrast, the total ruminal bacteria and cellulolytic bacteria on the CH diet were higher than on the other treatments. Supplementation with CH increased (p<0.05) F. succinogens and R. flavefaciens populations, whereas the populations of B. fibrisolvens and M. elsdenii were increased on the RBO diet. In addition, supplementation with CH and RBO had no effect on milk production and composition in dairy cows, while fatty acid composition of milk was influenced by RBO supplementation, and resulted in significantly lower (p<0.05) concentrations of both short-chain and medium-chain FA, and increased (p<0.05) the proportion of long-chain FA in milk fat, as well as significantly increased cis-9, trans-11 CLA and total CLA. In conclusion, RBO or CH exhibited specific effects on DMI, rumen fermentation, microbial population, milk yield and composition in lactating dairy cows, which were not interactions between CH and RBO in the diets. Feeding lactating dairy cows with RBO could improve fatty acid in milk fat by increasing cis-9, trans-11 CLA.

• KSBB Journal
• /
• v.14 no.3
• /
• pp.284-290
• /
• 1999

Glucose fed-batch culture was studied to improve cellulose productivity by Acetobacter xylinum BRC5. When initial glucose concentrations in batch cultures were less than 20 g/L, yield coefficients of cellulose (Yp/s) remained a constant value of 0.21 g cellulose/g glucose. But a low yield coefficient, Yp/s=0.13 was obtained from an initial glucose concentration of 40 g/L. Since initial high glucose concentrations in batch culture resulted in low yields of cellulose, constant fed-batch cultures were carried out. The optimal feed rate for fed-batch culture was 2.22 g glucose/L.h. In constant fed-batch culture without DO control, 10 g/L of cellulose was obtained from 40 g/L of glucose with this feed rate, which was approximately two fold higher than that of the batch culture with the same initial glucose concentration. In DO stat plus fed-batch culture, the highest cellulose productivity could be obtained when dissolved oxygen level was controlled at 10% of air saturation, and cellulose productivity increased about 1.5 times compared with that of the culture without DO control.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.1
• /
• pp.58-66
• /
• 2013

Most of steam power plant in Korea are heating the feed water system to prevent freezing water flowing in the pipe in winter time. The heating system is operated whenever the ambient temperature around the power plant area below 5 degree Centigrade. But this kind of heat supplying system cause a lot of energy consuming. If we think about the method that the temperature of the each pipe is controled by attaching the temperature measuring sensor like RTD sensor and heat is supplied only when the outer surface temperature of the pipe is under 5 degree Centigrade, then we can save a plenty of energy. In this study, the computer program package for simulation is used to compare the energy consumption load of both systems. Energy saving rate is calculated for the location of Youngweol area using the data of weather station in winter season, especially the January' severe weather data is analyzed for comparison. Various convection heat transfer coefficients for the ambient air and the flowing water inside the pipe was used for the accurate calculation. And also the various initial flowing water temperature was used for the system. Steady state analysis is done previously to approximate the result before the simulation. The result shows that the temperature control system using RTD sensor represents the high energy saving effect which is more than 90% of energy saving rate. Even in the severe January weather condition, the energy saving rate is almost 60%.

• Journal of Animal Reproduction and Biotechnology
• /
• v.34 no.3
• /
• pp.173-182
• /
• 2019

This study was performed to evaluate the effect of heat stress on the status of physiological responses, blood parameter, serum T3 and cortisol, and heat shock proteins (HSP 27, 70, and 90) of Hanwoo cattle. Six Hanwoo steers (242.8 ± 7.2 kg of BW) were housed in the climate-controlled respiration chambers. The experiment consisted of 7 days (control; 0 day) at thermoneutral (air temperature (Ta) of 15℃ and relative humidity (RH) of 60%; temperature-humidity index (THI) = 64), and by 3 and 6 days (treatment groups) at heat stress (Ta of 35℃ and RH of 60%; THI = 87). Body temperature of each parts (frank, rump, perineum and foot) and rectal temperature elevated in heat stress groups (3 days and 6 days) than the control group (0 day). Respiration rates increased in 3 days and 6 days (88.5 ± 0.96 bpm and 86.3 ± 0.63 bpm, respectively) from 0 days (39.5 ± 0.65 bpm). Feed intake significantly decreased in heat stress groups (3 days and 6 days, 3.7 ± 0.14 kg and 4.0 ± 0.15 kg, respectively) than the control group (0 day, 5.0 ± 0.00 kg). In addition, final BW significantly decreased in heat stress groups (3 days and 6 days, 211.8 ± 4.75 kg and 215.5 ± 3.50 kg, respectively) than the control group (0 day, 240.0 ± 25.00 kg). However, heat stress has no significant effect on blood parameter, serum T3 and cortisol. Nevertheless, heat stress increased HSPs mRNA expression in liver tissue, and serum concentration of HSPs. Despite Hanwoo cattle may have high adaptive ability to heat stress, our results suggested that heat stress directly effect on body temperature and respiration rate as well as serum and tissue HSPs. Therefore, we are recommended that HSPs could be the most appropriate indicators of Hanwoo cattle response to heat stress.

• Journal of Energy Engineering
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2003

Pressurized fluidized bed combustion unit is operated at pressures of 1~1.5 MPa with combustion temperatures of 850~87$0^{\circ}C$. The pressurized coal combustion system heats steam, in conventional heat transfer tubing, and produces a hot gas supplied to a gas turbine. Gas cleaning is a vital aspect of the system, as is the ability of the turbine to cope with some residual solids. The need to pressurize the feed coal, limestone and combustion air, and to depressurize the flue gases and the ash removal system introduces some significant operating complications. The proportion of power coming from the steam : gas turbines is approximately 80:20%. Pressurized fluidized bed combustion and generation by the combined cycle route involves unique control considerations, as the combustor and gas turbine have to be properly matched through the whole operating range. The gas turbines are rather special, in that the maximum gas temperature available from the FBC is limited by ash fusion characteristics. As no ash softening should take place, the maximum gas temperature is around 90$0^{\circ}C$. As a result a high pressure ratio gas turbine with compression intercooling is used. This is to offset the effects of the relatively low temperature at the turbine inlet.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.10
• /
• pp.19-26
• /
• 2021

In fine-particle injection processing, hard fine particles, such as silicon carbide or aluminum oxide, are injected - using high-pressure air, and a small amount of material is removed by applying an impact to the workpiece by spraying at high speeds. In this study, a two-axis stage device capable of sequence control was developed to spray various shapes, such as circles and squares, on the surface during the micro-particle jetting process to understand the surface-shape micro-particle-processing characteristics. In the experimental device, two stepper motors were used for the linear movement of the two degree-of-freedom mechanism. The signal output from the microcontroller is - converted into a signal with a current sufficient to drive the stepper motor. The stepper motor rotates precisely in synchronization with the pulse-signal input from the outside, eliminating the need for a separate rotation-angle sensor. The major factors of the processing conditions are fine particles (silicon carbide, aluminum oxide), injection pressure, nozzle diameter, feed rate, and number of injection cycles. They were identified using the ANOVA technique on the design of the experimental method. Based on this, the surface roughness of the spraying surface, surface depth of the spraying surface, and radius of the corner of the spraying surface were measured, and depending on the characteristics, the required spraying conditions were studied.

• Journal of Animal Science and Technology
• /
• v.47 no.6
• /
• pp.963-974
• /
• 2005

This study was conducted to examine the growth performance, carcass characteristics, physico-chemical properties and fatty acid composition of muscle tissues of Hanwoo steers when they were fed diets containing four levels of E. ulmoides leaves. Steers were allotted to one of four dietary treatments, which were designed to progressively substitute Eucommia ulmoides for 0, 3, 5 and 10% of the rice straw in the basal diet. Seventy two Hanwoo steers (321±13kg) were used. Average daily gain (0.81-0.86kg) and feed conversion (10.05-10.59) were not changed by feeding E. ulmoides leaves. Emission of fecal ammonia gas was decreased by increasing substitution levels of E. ulmoides leaves. Emission of ammonia gas in feces of steers were significantly (p<0.05) decreased in the 5% and 10% treatments at 40℃ compared with in control (30.6ppm) and 3% treatment (29.8ppm), respectively 20.3 and 21.6ppm. Back fat thickness was higher (p<0.05) in steers fed control diet (15.0mm) than 5 and 10% E. ulmoides diets (10.2 and 10.5mm respectively). The grade ‘A’ appearances of meat yield of steers were increased up to 20% by the 3% substitution of E. ulmoides leaves, and the grades ‘1+’ and ‘1’ appearances of meat quality were significantly improved (p<0.05) by the 5 and 10% Eucommia ulmoides feeding. There was no statistical difference in meat color of loin and top round among all treatments. It appeared that the 5% and 10% E. ulmoides leaves feeding affected (p<0.05) a increase in oleic acid concentration in loin and top round muscles. The concentration of serum cholesterol was lower (p<0.05) in steers fed 10% E. ulmoides (53.3mg/100g) than that of the other treatments (55.7-57.0mg/100g). The diarrhea incidence was about 20.26% in control, while it was lower (p<0.05) in the 5 and 10% E. ulmoides leaves treatments (10.4-12.5%) than control. There was no statistical difference in the occurrences of respiratory disease among all treatments. It is concluded that E. ulmoides leaves should be a prospective feed additive because it contains various functional substances. It is likely that air-dried E. ulmoides leaves can reduce the back fat thickness of Hanwoo steers and the occurrences of diarrhea. Therefore, the 5 and 10% substitution of E. ulmoides for roughage are highly recommended to be used in practice.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.2
• /
• pp.179-184
• /
• 1999

To examine the relationship between air pollution and occurrence of disease in plants, we investigated the alteration of physiology and biochemistry of Ginkgo biloba by inoculating with Coniothyrium sp. and fumigating with 0.1 ${\mu}l/l\;SO_{2-}$ Visual damage did not appear but photosynthesis, $CO_2$ use efficiency(CUE) and water use efficiency(WUE) were reduced when G. biloba was exposed to $SO_{2-}$for 7days (8 hours a day). When inoculated with Coniothyrium sp., the seventies of damage in G. biloba showed a threefold difference between $SO_{2-}$ treatment (SI) and $SO_{2-}$ free treatment (SFI) at day 42 from initial inoculation. Little difference was observed in sugar contents that may be used pathogens feed, among control, SFI and SI. In spite of the reduction in photosynthetic rate, sugar contents and CUE were maintained. WUE was enhanced 13% more at SI than SFI. The $CO_2$fixation boosted because of enhanced WUE, and thus sugar synthesis was not affected. In addition, sugar transport seems to be retarded for some internal alteration. Consequently, the severity of SI was more serious than that of SFI because Coniothyrium sp. easily invades into the physical texture of G. biloba weakened by $SO_2$ fumigation and because sugar was accumulated in leaves of G. biloba.