• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.3
• /
• pp.333-337
• /
• 2001

This study investigated the effects of fermented product from Bacillus subtilis (FPBS) on feed conversion efficiency, fat accumulation and ammonia production in broiler chicks. Sixty female broilers (strain Chunky, 7-day old) were divided into four groups and raised in individual cages. One group was fed a commercial diet without supplementation of FPBS as the control and the other three groups were fed commercial diets containing FPBS, either 0.5, 1.0 or 2.0%, for 21 days from 7 to 28 days of age. Water and feed were given ad libitum. Feed conversion efficiency was significantly improved in chicks supplemented with 0.5 or 1.0% of FPBS as compared with the control (p<0.05). The activities of hepatic acetyl-CoA carboxylase and fatty acid synthetase, and contents of triglyceride and cholesterol in the liver were significantly decreased in treatment groups (p<0.05) as compared with the control group. FPBS had no effect on the concentration of plasma triglyceride, phospholipids and cholesterol. Feeding FPBS at 1 % or 2% levels reduced ammonia gas release (p<0.05). The inclusion of FPBS at 1 % level may be recommended both to improve production efficiency and to reduce air pollution caused by ammonia gas release. For production efficiency to reach maximal profit, the inclusion of FPBS at 0.5% level can be recommended. Feeding FPBS reduced fat accumulation in the liver.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.121-125
• /
• 2001

SMD mounter is necessary in PCB assembling line. To feed SMD components to the mounter, high performance feeders are needed. Until now, mechanical air feeders have been mainly used. However, in these days, electrical feeders with network are developed. There are many kinds of feeders with various control techniques. In this paper, a feeder with BLDC motor and LON chip is designed and implemented. And, the experimental results are presented.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.1 no.1
• /
• pp.17-21
• /
• 2013

Purpose: Forecasting of petroleum consumption is useful in planning and management of petroleum production and control of air pollution. Research Design, Data and Methodology: ARMA models, sometimes called Box-Jenkins models after the iterative Box-Jenkins methodology usually used to estimate them, are typically applied to auto correlated time series data. Results: Petroleum consumption modeling plays a role key in big urban air pollution planning and management. In this study three models as, MLFF, MLFF with GARCH (1,1) and ARMA(1,1), have been investigated to model the petroleum consumption forecasts. Certain standard statistical parameters were used to evaluate the performance of the models developed in this study. Based upon the results obtained in this study and the consequent comparative analysis, it has been found that the MLFF with GARCH (1,1) have better forecasting results.. Conclusions: Survey of data reveals that deposit of government policies in recent yeas, petroleum consumption rises in Tehran and unfortunately more petroleum use causes to air pollution and bad environmental problems.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.44 no.2
• /
• pp.92-98
• /
• 2024

The objective of this study was to investigate the comparison of feeding a total mixed ration (TMR) containing imported alfalfa hay and TMR containing hot-air dried domestic alfalfa on rumination activity, milk production, and composition in lactating dairy cows. Ten Holstein dairy cows were divided into two groups: control (imported alfalfa hay + TMR) and treatment (hot-air dried domestic alfalfa + TMR) groups. The study was conducted over a total period of 18 days, including a 13-days adaptation period and a 5-days main experimental period. The results indicated no differences in total digestible nutrient and net energy intake between the imported and hot-air dried alfalfa. Body weight was not significantly different between the two groups (p>0.05), however, total feed intake and rumination time were significantly and tendentially higher in the treatment group compared with control group, respectively (p<0.001; p=0.075). Milk yield was not significantly different between the two groups (p>0.05), however, milk fat (kg) and lactose (%) concentration were significantly higher in the treatment group compared with control group (p=0.016; p=0.02). This study confirms that feeding TMR with hot-air dried domestic alfalfa results in no differences of feed intake, rumination activity, and milk productivity. Therefore, it is considered that hot-air dried domestic alfalfa can be used as a substitute for imported alfalfa on lactating dairy cows.

• Journal of Biosystems Engineering
• /
• v.12 no.4
• /
• pp.31-43
• /
• 1987

This study was performed to develop a hot water boiler system with small scale automatic rice hull furnace for the multi-purpose use in the farm. For the experiment a prototype hot water boiler system with rice hull furnace was fabricated, which was equipped with automatic hull feeder, igniter and ash removal device. Optimum operational conditions of the prototype: system were analyzed. The results arc summarized as follows. 1. The temperature measured right above the burning surface should be higher than $500^{\circ}C$ combustion. 2. The top zone of the combustion chamber was the most suitable location of the thermocouple to pick up the control temperature for the automatic operation of the rice hull furnace. 3. The content of carbon monoxide in the flue gas was increased with the filling height of burning material but it was less than 0.3 percent in volume in this experiment. When the filling height was expressed as the ratio of rice hull feed rate to the volume of the combustion chamber above the burning surface, the optimum ratio was about $150kg/m^3-h$. 4. The combustion efficiency of the prototype was higher than 95 percent when the feed rate was 1.1 to 2.3 kg/h and moisture content of rice hull was 22.4 percent (w.b.) or less. 5. It was estimated that the optimum operational conditions of the system were 1.3 to 2.0 kg/h in feed rate, 70 to 100 percent in excess air and 500 to $510^{\circ}C$ in control temperature. 6. The efficiency of coil heal exchanger increased with a decrease in feed rate of rice hull. When the rice hull feed rates were 1.1, 1.7 and 2.3 kg/h, the efficiencies of coil heat exchanger were about 34, 30 and 25 percent and heat transfer rates were 5.7, 7.6 and 8.8 MJ/h, respectively. When the flat plate heat exchanger was used in addition to the coil heat exchanger, the efficiency of the heat exchanger system increased to 48 percent.

• Journal of Animal Environmental Science
• /
• v.5 no.3
• /
• pp.203-216
• /
• 1999

Recent public concern about air pollution caused by swine production facilities has forced to develop the methods to reduce and control the swine odors. Swine odors were affected the life of pig farm neighborhoods, swine productivity, pig health, diseases, and human right, safety, sanity as negatively. The first approaches of control of swine odors are the change or improve of the classical management systems, which are manure treatment method, manure storage facility, phase feeding, sex-divided feeding, feeder type, liquid-slurry feeding, environment control of swine building and dust control of indoor swine facility. The methods to control odor emission from manure have to include the diet modification as nutritional basis. In recent, research emphasis has focused on manipulating the swine diet to increase the nutrient utilization of the diet to reduce excretion products and reduction of odors. There are lots of feed additives and pit additives introduced as practical basis for reducing odor emissions. The ozone treatment method is candidate as the good system for reducing swine odor. But this system is still too expensive to practice in present.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.3
• /
• pp.363-368
• /
• 2018

Objective: The objective of the study was to determine the effect of fermented spent coffee ground (FSCG) on nutrient digestibility and nitrogen utilization in sheep. Methods: Fermentation of spent coffee ground (SCG) was conducted using Lactobacillus plantrum. Fermentation was performed at moisture content of 70% and temperature of $39^{\circ}C$ with anaerobic air tension for 48 h. Four adult rams (initial body weight = $56.8{\pm}0.4kg$) were housed in a respiration-metabolism chamber and the treatments were: i) control (Basal diet; 0% SCG or FSCG), ii) 10% level of SCG, iii) 10% level of FSCG, and iv) 20% level of FSCG in $4{\times}4$ Latin square design. Each dietary experiment period lasted for 18-d with a 14-d of adaptation period and a 4-d of sample collection period. Results: In SCG fermentation experimental result, acid detergent insoluble nitrogen (ADIN) concentration of FSCG (64.5% of total N) was lower than that of non-fermented SCG (78.8% of total N). Digestibility of dry matter and organic matter was similar among treatment groups. Although crude protein (CP) digestibility of the control was greater than FSCG groups (p<0.05), the 10% FSCG group showed greater CP digestibility and nitrogen retention than non-fermented 10% SCG group (p<0.05). Body weight gain and average daily gain were linearly decreased with increasing FSCG feeding level (p<0.05). When the feeding level of FSCG was increased, water intake was linearly increased (p<0.05). With an increasing FSCG level, dry matter intake did not differ among groups, although the gain to feed ratio tended to decrease with increasing level of FSCG (p<0.10). Conclusion: Microbial fermentation of SCG can improve protein digestibility, thereby increasing CP digestibility and nitrogen utilization in sheep. Fermentation using microorganisms in feed ingredients with low digestibility could have a positive effect on improving the quality of raw feed.

• Journal of Biosystems Engineering
• /
• v.9 no.1
• /
• pp.22-33
• /
• 1984

Husk separator is an indispensable equipment in rice milling plants. However, any basic research on the designing and operating criteria of the husk separator have rarely been conducted in Korea. According to the survey results reported recently, grain loss occurs in the process of rice husk separation at custom rice milling plants in Korea and the performance of husk separator has also not been identified. With this regard this study was conducted with a typical commercial husk separator to investigate the effect of the operational factors such as feed rate, blower speed and opening ratio on the velocity distribution in the air duct and the performance of the separator. The results are summerized as follows: 1. The average wind velocity in the primary air duct increased linearly with the blower rpm and the size of air inlet port in both cases of double type and single type operations. 2. The coefficient of variation in the horizontal wind velocities in the primary air duct was the minimum when the opening ratio was 0.22 ($0.052m^2$ of air inlet port) in both cases of single type and double type operations regardless of the blower speeds used in this test. The average wind velocity at the upper part of air duct was greater by 2-5 m/s than the velocity at the bottom part in double type operation. In case of single type operation, however, the average velocity in the middle part was greater than the upper or bottom part when the opening ratio was greater than 0.74. 3. The relationship between the overall effectiveness of separation(Ed for double type and Es for single type) and the average wind velocity (Va) in the primary air duct was expressed in the following quadratic functions. $$Ed=-190.84+106.18Va-10.052Va^2$$ ($r^2$ = 0.97782) $$Es=-223.76+106.23Va-9.1935Va^2$$ ($r^2$ = 0.97029) The average wind velocity required to obtain the overall effectiveness of separation more than 80% ranged from 4.04 m/sec to 5.84 m/sec in case of double type operation, and from 4.70 m/sec to 6.20 m/sec in case of single type. 4. An optimum wind velocity can be obtained with an increase in the blower speed or the size of air inlet port as presented in Figure 8. There was a tendency that the faster the blower speed, the narrower the control range of the air inlet port. 5. The feed rates (1850kg/hr and 2100kg/hr) adopted in this experiment did not bring about a significant difference in both the overall effectiveness of separation and the power consumption. 6. The energy consumption increased cubically with the blower speed but linearly with the size of the air inlet port. On the basis of the results described in items 1, 3, and 6, it would be more economic to adjust the size of the air inlet port larger with a relatively low blower speed than to adjust the size smaller with a relatively high speed.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.1
• /
• pp.36-44
• /
• 2013

This paper is written for the development and application of boiler fuel control algorithm and distributed control system of coal-fired power plant by the steps of design, coding, simulation test, site installation and site commissioning test. Fuel control algorithm has the upper algorithm and it is boiler master control algorithm that controls the fuel, feed water, air by generation output demand. Generation output demand by power load influences fuel control. Because fuel can not be supplied fast to the furnace of boiler, fuel control algorithm was designed adequately to control the steam temperature and to prevent the explosion of boiler. This control algorithms were coded to the control programs of distributed control systems which were developed domestically for the first time. Simulator for coal-fired power plant was used in the test step. After all of distributed control systems were connected to the simulator, the tests of the actual power plant were performed successfully. The reliability was obtained enough to be installed at the actual power plant and all of distributed control systems had been installed at power plant and all signals were connected mutually. Tests for reliability and safety of plant operation were completed successfully and power plant is being operated commercially. It is expected that the project result will contribute to the safe operation of domestic new and retrofit power plants, the self-reliance of coal-fired power plant control technique and overseas business for power plant.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.4
• /
• pp.442-451
• /
• 2019

Objectives: The aim of this study was to review the reduction methods for ammonia (NH₃) and hydrogen sulfide (H₂S) exposure in livestock. Methods: By reviewing domestic and international research reports from Korea and China, reducing ammonia and hydrogen sulfide in livestock pens was analyzed in terms of ventilation, deodorant, and feed additives. In addition, exposure limits in Korea and China were examined through a comparison between 'TLV-TWA and STEL under the Industrial Safety and Health Act in Korea' and 'Management Standards for Air of Livestock Pens in China'. Results and Discussion: In order to effectively control hazardous gases and odors in livestock pens, the enhancement of natural ventilation or the addition of ventilation fans at the pollution source are being examined. Deodorants are used as adsorbents or masking deodorants. Additives to feed were zeolite powder, FeSO₄·7H₂O, enzymes, and microbial preparations. Use of feed additives was low-cost and had significant effects compared to other methods. Zeolite was the most commonly used in feed additive in Chinese cases and proved to be low-cost and effective for reducing harmful gases. Enzyme preparations were shown to stimulate the growth of livestock, but were expensive. Conclusions: This study reviewed and examined domestic and international research papers in Korea and China for reducing ammonia and hydrogen sulfide concentrations in livestock pens. More diverse research and the development of feed additives are needed.