• 한국식품영양과학회지
• /
• 제19권3호
• /
• pp.195-200
• /
• 1990

Effects of cooking time(5-30 min in a pressure cooker) and HTST air dehydratiion time(0-9min at 15$0^{\circ}C$) on physical properties of dried green peas(3% oisture content wet basis) were investigated by determining rehydration ratio rehydration curve browning reaction and puncture force, The rehydration ratio and curve of dried green peas were increased with increa-sing cooking time and HTST air dehydration time. Preheating of the green peas for 30 min in a pressure cooker or for 9 min of HTST air dehydration time prior to 6$0^{\circ}C$ air dehydration recovered a 87.3% of original moisture content of raw green peas in a boiling water for 5 min. The brownin greaction was gradually decreased up to 15 min of cooking time. Puncture pressure of rehydrated green peas treated in a boiling water for 5 min was decreased as the cooking time and HTST air dehydration time were increased and was highly correlated with rehydration (r=-0.956) The effects of cooking time and HTST air dehydration time on rehydration ratio browning reaction and puncture pressure were significantly different at the a=0.01 level except effect of HTST air dehydration time on browning reaction.

• 한국식생활문화학회지
• /
• 제37권4호
• /
• pp.354-362
• /
• 2022

The purpose of this study was to investigate the possibility of using air potato (Dioscorea bulbifera) powder to make sponge cakes. The sponge cake batter was made by adding 0, 10, 20, 30, and 40% of air potato powder, and the resultant anti-oxidative properties and quality characteristics were analyzed. The study showed that the height, batter yield, and loss rate of sponge cakes decreased as increasing amounts of air potato powder were added, but the weight, viscosity, moisture content, and specific gravity increased. An evaluation of the color showed that the L and b values were highest in the control group but the a value was highest in the 40% group. There was no significant difference between samples in terms of cohesiveness, although the study showed a significant increase in the hardness, chewiness, and gumminess as the quantity of air potato powder in the sponge cakes increased. The total polyphenol content and DPPH radical scavenging activity increased noticeably as more air potato powder was added to the sponge cakes. The results thus showed that the study groups with the addition of air potato powder showed higher antioxidant activity than the control group.

• Journal of the Korean Wood Science and Technology
• /
• 제47권6호
• /
• pp.732-750
• /
• 2019

천연건조 중 목재의 함수율 변화 예측모형을 제시하기 위하여 15본의 소나무 원목에 대한 천연건조를 수행하였다. 초기함수율이 68.7%인 6본의 소나무 원목에 대하여 여름철에 천연건조를 시작한 후 약 880일이 경과한 후의 최종함수율은 17.4%이었다. 초기함수율이 35.8%인 9본의 소나무 원목에 대하여 겨울철에 천연건조를 시작한 후 약 760일이 경과한 후의 최종함수율은 16.0%이었다. 소나무 원목의 말구지름, 온도, 상대습도, 풍속을 독립변수로 결정하고, 천연건조 중 감소한 함수율을 종속변수로 다중회귀분석을 진행한 결과, 결정계수 0.925의 회귀모형을 얻을 수 있었다. 소나무 원목의 특성인 초기함수율과 말구지름이 기상조건인 온도, 상대습도, 풍속에 비하여 천연건조 중 함수율 감소에 미치는 영향이 더 크게 나타났다. 천연건조 중 내부함수율의 분포 및 함수율 변화를 예측하기 위하여 2차원 물질전달 해석을 수행하였다. 건조일수를 서로 다르게 적용하고, 수분확산계수 및 표면방사계수를 결정하는 기상조건을 다르게 적용한 2가지의 예측모형을 제시하였다. 2가지 적용 방법의 오차는 0.1 - 0.8%의 범위였으며, 측정값과의 차이는 2.2 - 3.6%의 범위였다. 다양한 초기함수율과 말구지름의 소나무 원목에 대한 천연건조 중 내부함수율을 측정하고, 각각의 기상조건에 대한 목재 내 수분이동계수를 산출하면 예측모형의 오차를 감소시킬 수 있을 것으로 판단된다.

• 한국식품영양학회지
• /
• 제6권3호
• /
• pp.178-188
• /
• 1993

This research was attempted to investigate changes in physicochemical properties of rice extrudate with added ginger powder extruded by single screw extruder. Graphic three dimensional analysis on response surface regression was used to evaluate effects of extrusion variables on quality factors of the extrudate according to two independent variables, ginger consent 0∼12%, moisture content 14∼26%. The summarized results are as follows : 1) Regarding proximate composition of rice extrudate with added ginger powder, as ginger powder content of raw material Increased, crude tat, crude protein, crude ash and crude fiber increased, while soluble nitrogen free extract decreased. 2) Graphic three dimensional analysis on response surface regression was conducted for each dependent variable which revealed statistically significant relationship with independent variables, 0∼120A ginger and 14∼26% moisture content. Expansion ratio had a critical point as moisture content changed. As ginger and moisture content Increased, bulk density, break strength and water absorption Index Increased, while water solubility Index decreased. The predicted maximum degree of gelatinization in 6.15% ginger and 15.56% moisture content is 88.27%, and lightness decreased as ginger content Increased. According to the microstructure for the cross section of extrudate obsorbed with image analyzer, air cell number and perimeter revealed saddle point, meanwhile total area and fractarea of air cell had critical points as moisture content changed. In view of the results, quality of rice extrudate with added ginger powder was optimum when rice flour was fed to the extruder with 2∼7% singer powder and 15∼20% moisture content.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표회 논문집(I)
• /
• pp.7-12
• /
• 1998

The waste sludge is by-produced about 20-30% of total production and arised to the severe problems of this mine's surrounding environmnet. This study was invested the composition of component, particle of size of the waste sludge by Chemical Analysis, X, R, D, Particle Size Analyzer and the physical properties (air content, slump, strength, etc) of concrete when the waste sludge is added into concrete. so, It's recomended the proper content of the waste sludge to be added into concrete. and then, is verified to be applied at batch plant in field. Above the results, the recomeded content of the waste sludge is about 2-4% (about 4-8% in cement) in aggregates and when it's added the recomended content, they are detected to be more or less changed the physical properties of concrete, ( equally strength and durability, little less air con tent, little increased shinkage, etc). but the application of the recomended content don't arise the problem of the basic quality control of concrete and physical properties.

• 자원리싸이클링
• /
• 제27권1호
• /
• pp.45-54
• /
• 2018

플라이애시의 부유선별 과정에서 교반속도와 공기주입량과 같은 기계적 요소 변화에 따른 영향을 알아보고자 본 연구를 실시하였다. 본 연구에서는 미연탄소 함량이 약 3.4 ~ 3.7% 수준인 화력발전소 플라이애시를 사용하였다. 대표적인 부유선별의 선별 요소인 pH, 교반속도, 포수제 첨가량, 기포제 첨가량 변화에 따른 영향을 살펴보았을 때, Safflower oil을 포수제로 사용하여 첨가량을 800 g/ton, pH 7, 교반속도 1,200 rpm, 기포제 첨가량이 400 g/ton였을 때, 미연탄소 회수율과 미연탄소 함량이 각각 63%, 34%로 나타났다. 이 때 부상물 SEM/EDS 분석을 통해 알아본 결과, 구형의 플라이애시 미립자가 미연탄소 내에 고용되거나, 광액 내에 가라앉지 못하고 기포와 함께 부유함으로써 미연탄소의 함량을 낮추는 것으로 나타났다. 교반속도와 공기주입량과 같은 기계적 요소를 변화시킨 실험에서는 공기주입량 8L/min, 교반 속도 900 rpm에서 미연탄소 회수율 74%, 미연탄소 함량 67%인 것으로 나타났다. 이는 낮은 교반속도와 추가 공기주입으로 인하여 광액 내 와류의 강도가 낮아져, 미립의 플라이애시 입자가 미연탄소와 함께 부유되는 현상을 방지됨으로써, 미연탄소 회수율과 미연탄소 함량이 향상된 것으로 나타났다. 또한, 교반속도와 공기주입량을 각각 800 rpm, 6 L/min으로 설정하였을 때 미연탄소 회수율과 미연탄소 탄소함량이 각각 80%, 70%로 향상되어 가장 우수한 것으로 나타났다.

• 한국방재학회 논문집
• /
• 제10권2호
• /
• pp.47-53
• /
• 2010

초속경 LMC(Very-Early Strength Latex-Modified Concrete ; VES-LMC)는 작업성, 강도발현 및 장기 내구성 측면에서 콘크리트 타설 후 3시간 이내에 교통개방을 가능하게 할 목적으로 개발되었고, 교량바닥판 긴급보수 공사에 유용하게 사용되고 있다. 그러나 초속경 LMC에서 라텍스의 사용이 콘크리트의 내구성은 향상시키지만 다량의 갇힌 공기를 양산한다는 단점이 있다. 따라서 취약한 공극구조를 개선하기 위해서는 특별한 방법이 필요하며, 본 논문에서는 울트라파인 플라이 애시가 사용되었다. UFFA VES-LMC의 공기량은 재령 1일에 포졸란 반응의 대부분이 발생하여 재령 1일 공기량이 경화전 공기량보다 저하되었다. 또한 재령 28일 공기량은 재령 1일 공기량의 공극구조와 동일하게 나타나, 포졸란 반응에 의해 콘크리트의 전체 공기량이 감소함을 확인하였다. 수산화칼슘의 첨가는 200 ${\mu}m$이하 크기의 연행공기를 현저하게 증가시키고, UFFA를 15%이상 사용하면 간격계수를 200 ${\mu}m$ 이하까지 확보할 수 있어 VES-LMC의 공극구조 개선에 매우 효과적인 것으로 나타났다.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• 제23권1호
• /
• pp.34-38
• /
• 1995

A diagnostic study on the summertime air mass thunderstorms occurring in the middle region of South Korea was made by analyzing the data of surface and upper air observations as well as the surface and upper level weather charts. The key parameters used in the present study are the amount of precipitable water below 850 hPa level, the vertical profiles of water vapor content and wind, and both the temperature difference and the equivalent potential temperature difference between 850 hPa and 700 hPa levels. It is found from this study that the summertime air mass thunderstorms in the middle region of South Korea can be classified into two distinct types, type I and type II. The thunderstorms of type I occur under the atmospheric conditions of high moisture content, low vertical wind shear in low levels, and conditional instability between 850 hPa and 700 hPa levels. On the other hand, the thunderstorms of type II occur under the atmospheric conditions of less moisture content, higher wind shear and conditional instability. Furthermore, our study suggests that atmospheric instability and the amount of water vapor below 850 hPa level are complementary in the development of air mass thunderstorms. The complementary nature between these two parameters may be an explanation for the thunderstorm development in the areas of low atmospheric water vapor content such as the plains of eastern Colorado.

• 멤브레인
• /
• 제22권3호
• /
• pp.208-215
• /
• 2012

PVA와 PAA블랜드의 용액주조법을 통하여 겔 고분자 전해질막이 제조되었다. 블랜드 내의 PAA함량은 30에서 80 wt% 사이 범위에서 조절되었다. 겔 고분자 전해질을 이용하여 아연공기전지를 제작하였다. 제조된 겔 고분자 전해질의 기계적, 전기적 특성을 인장실험과 임피던스 실험을 통하여 측정하였다. 아연공기전지의 성능은 current interrupt method와 정전류 방전실험을 통하여 측정하였다. 겔 고분자 전해질 내의 PAA함량이 증가함에 따라 인장강도 및 인장탄성계수가 감소하였다. 반면, PAA함량의 증가에 따라 겔 고분자 전해질막의 이온전도도는 증가하였다. 이와 같은 이온전도도의 증가의 아연공기전지 내에서의 효과는 current interrupt method와 정전류 방전실험에서 확인되었다. PAA함량이 높은 겔 전해질막으로 제조된 전지는 낮은 IR손실과 높은 방전용량을 보였다.

• 한국조경학회지
• /
• 제27권1호
• /
• pp.122-131
• /
• 1999

Indoor environments are usually less than optimal for the growth of ferns, especially in regards to the water condition. These studies were performed to investigate responses involved in causing growth of ferns and presume management plan against the water deficit under indoor conditions. The effect of air humidity and soil moisture on the ferns was examined in Adiantume raddianum and Selaginella kraussiana. Results of experiments are as follows; 1. Under a low humidity condition, having a 25-50% RH. ornamental value of ferns decreased much more than under a 90% RH. Under a low soil moisture, such as sand treatment, ornamental value of ferns also decreased. 2. Leaf chlorophyll content, water content and stomata situations increased as air humidity and soil moisture went up. 3. Even if air humidity and soil water were not enough for ferns growth, the extending of irrigation cycle was helpful. 4. Under extremely low air humidity conditions, some water management, namely, using water holding soil or extending of irrigation cycle was desirable. Other methods of increasing air humidity, including water instruments such as ornamental pools, waterfalls, or fountains, grouping plants together were also helpful. But spraying water on leaves increased injury to ferns growth because of excess evaporation from the leaves. Though these studies, we learn that ferns are susceptible to water condition such as air humidity, soil water and water management. If other environmental factos are maintained with optimal conditions, water condition plays an important role in ferns growth in indoor environments.