• Journal of the Korean Wood Science and Technology
• /
• 제40권2호
• /
• pp.101-109
• /
• 2012

Wood composites are a hygroscopic material and have ability to exchange its moisture content with air. This study investigated the formaldehyde emission and moisture content change of four wood composites (particleboard (PB), medium density fiberboard (MDF), high density fiberboard (HDF), laminated HDF (L-HDF)) as a function of bake-out temperature and time. The composites were baked out for 1, 3, 5, 7, 10, 14, 21, and 28 days at temperatures of $20{\pm}2$, $35{\pm}2$, and $50{\pm}2^{\circ}C$ in a dry oven. The moisture content change was used to determine the emission bake-out of the composites. Best bake-out time results were obtained with after 7 days all composites. Formaldehyde emission values of composites decreased with decreasing moisture content for both temperatures. The formaldehyde emission results of bake-out temperature 35 and $50^{\circ}C$ showed a similar tendency.

• The Korean Journal of Ecology
• /
• 제16권1호
• /
• pp.27-37
• /
• 1993

During the autumn of 1991, the water soluble sulfur content in litters of platanus orientalis on the street sides in seoul, pusan, taegu, taejeon, kwangji, ulsan and ch'unch'on cities were determined. The relationship between the water soluble s content in litters of p. orientalis and the traffic was analysed. The average content of water soluble s in litters of p. orientalis in pusan, taegu, taejeon, seoul, ulsan, ch'unch'on and kwangju cities were 0.71%, 0.60%, 0.66%, 0.58%, 0.50%, 0.43%, 0.38%, respectively. The correlation was not statistically significant between the s content in litters of p. orientalis is related to the traffic of each studied area. consequently the water soluble s content in litters of p. orientalis is supposed to be an indirect indicator of air pollution.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.174-179
• /
• 1997

In this study, effects of carbon content and fineness of fly-ash on the workability an the strength development of concrete and investigated experimentally. Carbon content with 6 levels (0, 2, 3, 4, 5, 7%) and fineness with 3 levels (4, 000, 5, 000, 6, 000 $\textrm{cm}^2$/g) are selected for test variables. Besides, the effect of fly-ash with variation of initial concrete temperature is tested. To measure slump and air losses, small laboratory agitator is used. As the results, the used AE admixture content to maintain constant initial air content is increased linearly with increasing carbon content in fly-ash. With increasing fineness of fly-ash, the strengths at 3 and 7 days are slightly increased, however, there is no clear difference among 28 day strengths within the scope of this study.

• Journal of Biosystems Engineering
• /
• 제4권2호
• /
• pp.65-83
• /
• 1979

Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well. 2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air. 3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying. 4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis. 5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time. 6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture. 7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation. 8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise. 11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss. 12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method. 13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated. Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year. 14. Required fan horsepower and energy for the intermittent fan operation were 3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation. 15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use. 16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

• Journal of Biosystems Engineering
• /
• 제4권2호
• /
• pp.64-64
• /
• 1979

Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well.2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air.3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying.4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis.5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time.6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture.7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation.8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise.11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss.12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method.13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated.Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year.14. Required fan horsepower and energy for the intermittent fan operation were3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation.15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use.16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.167-167
• /
• 1982

Italian poplar (Populus euramericana) rotary veneers were press-dried and air-dried to study drying curves, thickness shrinkage and width shrinkage of them under several drying conditions such as drying temperatures and veneer thicknesses. The results of the study are summarized as follows; 1. In press-drying, drying times from green condition to about final moisture content of 10 percent with veneer thickness of 0.6mm by platen temperatures required about 10 minutes at platen temperature of $100^{\circ}C$, 3 minutes at $110^{\circ}C$, 1 minute at $120^{\circ}C$ and $130^{\circ}C$, respectively. 2. In press, drying, drying times from green condition to about final moisture content of 10 percent by veneer thicknesses required 2 minutes at veneer thickness of 0.6mm, 4 minutes at 1.2mm,6 minutes at 1.8mm and 9 minutes at 3.6mm, respectively. 3. In air-drying, drying times from green condition to air-dried moisture content by veneer thicknesses required 15 hours at veneer thickness of 0.6mm, 18 hours at 1.2mm and 23 hours at 2.4mm, respectively. 4. Thickness shrinkage of press-drying was remarkably greater than that of air-drying, but width shrinkage of press-drying was rather smaller. 5. Difference of thickness shrinkage among platen temperatures was insignificant, and width shrinkage at platen temperature of $130^{\circ}C$ was the least.

• 한국연초학회지
• /
• 제8권2호
• /
• pp.19-27
• /
• 1986

This experiment was carried out to investigate the effect of circulating air volume to chemical composition of tobacco leaves during the bulk curing. The results were as follows : The decrease of circulating air volume prolonged curing time as the case of a 0.058m3/min. kg; but, no remarkable changes with a 0.11m3/min. kg and a 0.083m3/min. kg. When the circulating air volume was decreased, compared with 0.11m3/min. kg, sugar content was increased while total nitrogen and nicotine content showed a reduced values. In case of a 0.058m3/min. kg and a 0.083m3/min.kg, solanone and damascenone were high. Some of volatile neutral constituents and volatile organic acids were increased during curing process ; especially, their quantities were remarkably increased during the midrib drying stage. As circulating air volume decreased the equilibrium moisture content was increased, while leaf shatter index and filling capacity were decreased.

• 조명전기설비학회논문지
• /
• 제30권3호
• /
• pp.86-93
• /
• 2016

It is very desirable that a mixture gas possessing excellent insulation performance is suggested for insulation on increasing high voltage. This paper proposes a $SF_6$ mixture gas based on the factors including dielectric strength, environmental impact and economic feasibility of manufacture for the insulation in eco-friendly power equipment. A suitable-$SF_6$ content was determined to improve the dielectric strength in $N_2$ and Dry Air. The examination results of the factors revealed that a $SF_6$/Dry Air mixture gas possessing the $SF_6$ content was more appropriate than a $SF_6/N_2$ mixture gas to the eco-friendly power equipment. In addition to the selection of the suitable $SF_6$ mixture gas, insulation characteristics as a function of $SF_6$ content were described from electron-detachment mechanism.

• 한국식품조리과학회지
• /
• 제23권6호
• /
• pp.800-809
• /
• 2007

To develope Hanbang beef jerky as health food, six kinds of beef jerky were prepared by adding sugar (A), licorice (B) and three kinds of spice extracts (clove: C, fennel fruit: D and Chungyang green pepper extract: E) and mixture of all extracts (F). The effects of the drying method and added spice extracts on the quality characteristics of the beef jerky were evaluated. In general, the air-blast dried beef jerky contained $31{\sim}33%$ moisture, $50.0{\sim}51.2%$ crude protein, $7.2{\sim}7.8%$ crude lipid and $3.0{\sim}3.3%$ crude ash. For the mineral content of the air-blast dried jerky, the most prevalent mineral was Na $(1540.08{\sim}1838.17$ mg%), followed by K, P, Mg, and Ca. The Ca content of the beef jerky was highest in the mixed extract group (88.53 mg%), and the lowest content was in sugar-added group (53.12 mg%). For the color properties, the L-value (lightness), a-value (redness) and b-value (yellowness) were higher in the air-blast dried beef jerky than in the hot air dried samples. The drying methods showed their greatest affect on the redness (a) for all six jerkies (p<0.001). For the preference by sensory evaluation, the beef jerky samples with added sugar (A) and licorice extract (B) had significantly higher scores than the beef jerky samples with the added spice extracts, for both of air-blast drying and hot air drying (p<0.05). Preference for the air-blast dried beef jerkies with added clove (C) and fennel fruits (D) were significantly higher, in terms of taste, color, softness and aftertaste as compared to the respective hot air dried jerkies (p<0.01). Considering all the obtained results, we concluded that licorice and spice extracts can be used as natural preservatives in the development of health foods and the air-blast drying method is recommended to improve the quality characteristics of beef jerky.

• 한국식품저장유통학회지
• /
• 제12권5호
• /
• pp.417-423
• /
• 2005

본 연구에서는 마른 오징어의 품질 향상을 위해서 일반적으로 많이 사용되고 있는 천일 건조와 온풍건조 방법을 이용하여 건조조건에 따른 마른 오징어의 건조특성 및 이화학적 품질 특성을 분석하였다. 건조방법에 따른 건조완료 마른오징어의 건조시간, 수분함량 및 수분활성도는 온풍건조의 경우 온도가 증가함에 따라 건조시간은 줄어들었고 천일건조의 경우에는 총 120시간만에 건조가 완료되었으며 수분활성도는 미생물의 생육과 증식이 불가능한 0.468~0.486을 나타내었다. 마른오징어의 $\Delta$Ε 값은 같은 온풍건조 30$^{\circ}C$를 제외하고 차이가 적어 육안으로는 큰 차이를 느끼지 못하였다. 건조 방법 및 시간에 따른 TBA가는 차이를 보여 건조 완료 마른오징어의 경우 35℃ 온풍건조가 가장 높게 나타났다. 오징어의 맛을 내는 아미노산인 proline, alanine, glycine과 taurine은 온풍건조 35$^{\circ}C$에서 가장 높았으며 천일건조의 경우 생오징어와 유사한 조성비를 가지고 있었지만 유리 아미노산의 양은 감소한 것으로 나타났다. 천일건조와 온풍건조를 비교하면 총 지방산의 함량은 천일건조가 많은 것으로 나타났으며, 콜레스테롤 함량은 생오징어가 707.8 mg/100 g, 천일건조는 522.3 mg/100 g, 온풍건조는 평균 511.4 mg/100 g로 나타나 건조 오징어의 콜레스테롤 함량이 감소하는 경향이었다.