• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.89-97
• /
• 2007

The car-dependent traffic system based on highly advanced industrialization and economic growth causes various urban problems including traffic jams, energy consumption, air pollution, noise, car accidents and other issues. Particularly in urban areas, air pollution from motor vehicles is worse than pollution from past industrialization. In this study, therefore, the authors grasped car exhaust reduction effects by using microsimulation and those traffic policies that could make cars flow smoothly, reducing the air pollution in urban areas through analysis on profitability. As a result, the weekday-based car using system has been found most effective as it does not need investment cost. However, this system may be socially unacceptable, as it requires the government to change driver behavior. Therefore, the government needs to first reach a consensus with the citizens regarding this system. This system will also be effective with other alternatives. As a follow-up study, the authors will research citizens' perceived impacts of car exhaust on air pollution through a study on preference and grasp the possibility of applying these study results to real traffic policies.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.9
• /
• pp.4287-4306
• /
• 2016

Network resilience provides an effective way to overcome the problem of network failure and is crucial to Internet protocol (IP) network management. As one of the main challenges in network resilience, recovering from link failure is important to maintain the constancy of packets being transmitted. However, existing failure recovery approaches do not handle the traffic engineering problem (e.g., tuning the routing-protocol parameters to optimize the rerouting traffic flow), which may cause serious congestions. Moreover, as the lack of QoS (quality of service) restrictions may lead to invalid rerouting traffic, the QoS requirements (e.g., bandwidth and delay) should also be taken into account when recovering the failed links. In this paper, we first develop a probabilistically correlated failure model that can accurately reflect the correlation between link failures, with which we can choose reliable backup paths (BPs). Then we construct a mathematical model for the failure recovery problem, which takes maximum rerouting traffic as the optimizing objective and the QoS requirements as the constraints. Moreover, we propose a heuristic algorithm for link failure recovery, which adopts the improved k shortest path algorithm to splice the single BP and supplies more protection resources for the links with higher priority. We also prove the correctness of the proposed algorithm. Moreover, the time and space complexity are also analyzed. Simulation results under NS2 show that the proposed algorithm improves the link failure recovery rate and increases the QoS satisfaction rate significantly.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.3
• /
• pp.18-27
• /
• 2015

Many studies have shown that having perception of spatial information is important for air traffic control officer (ATCO) since it helps them understand the current situation and predict the situation it leads to. However, little or no research has been done to investigate if there is any difference at the levels of expertise in perceiving spatial information and predicting a prospective situation. This study investigates the difference between expert and novice ATCO groups in how accurately each group of ATCO perceive spatial information such as position, altitude, speed, and flying direction, and predicting such information they will encounter shortly. In completing a task to watch the movement of airplanes displayed on the computer monitor as a blip, the participants were asked to predict the position, speed, and the altitude of the aircraft in a minute by marking on the sector map. The results show that the expert group performed better in accuracy and had tendency to overestimate on position and altitude; however, no significant difference was found between the two groups in terms of reading a flying direction. Therefore reading a flying direction may not be a reliable indicator to judge expertise of ATCO. But the expert group shows better predicting performance by perceiving spatial information such as airplane's position and altitude with feeling on time. The study suggests that it is important to enhance perceptive skills in ATCO training in improving their expertise in predicting accuracy traffic situation, preventing from air collision, and improving productivity for more efficient air traffic flow. A further study on the relationship between the perception of spatial information and the sense of time in predicting future information and effectiveness as an independent factor would contribute to providing more insights into expertise of ATCOs.

• Journal of Advanced Navigation Technology
• /
• v.16 no.5
• /
• pp.744-751
• /
• 2012

Air Traffic Management(ATM) is to control air traffic flow quickly and safely. For efficient ATM, the ability which calculate optimal route using filight plan and filght information is required. Especially for the time-sensitive air cargo, it is essential. In this paper, therefore, we present a dynamic route search algorithm which calculate optimal route dynamically. The conventional method using Dijkstra algorithm has a problem that recalculate the entire route when some airways are closed. However, the proposed algorithm recalculates only affected waypoints, so it finds optimal route quickly and accurately. Comparisons with the conventional method and the proposed algorithm show that the proposed algorithm provides better.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.6
• /
• pp.1-6
• /
• 2020

Road movement pollutant air environment big data is a link between real-time traffic data such as vehicle type, speed, and load using AVC, VDS, WIM, and DTG, which are always traffic volume survey equipment, and road shape (uphill, downhill, turning section) data using GIS. It consists of traffic flow data. Also, unlike general data, a lot of data per unit time is generated and has various formats. In particular, since about 7.4 million cases/hour or more of large-scale real-time data collected as detailed traffic flow information are collected, stored and processed, a system that can efficiently process data is required. Therefore, in this study, an open source-based data parallel processing performance optimization study is conducted for the visualization of big data in the air environment of road transport pollution.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.6
• /
• pp.448-454
• /
• 2001

In the present study, the transient axi-symmetric numerical simulation of traffic ventilation induced by a train running through a 15.6km-long tunnel is performed by using over 100,000 computational cells. With train running, three cases of ventilation schemes are simulated, which are the case of ventilation fans turned on, the case of no fan but ventilation shafts open, and the case of no fan and no shaft. Results of the ventilation flow rate are pressure transients are compared for the cases considered.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.638-643
• /
• 2011

The aluminum soundproofing panel used to the traffic noise reduction will judge with the material to improve because the CO2 emission is greater than other soundproofing panel such as plastic soundproofing panel. Also, if the air-passing soundproofing panel which can endure the fast wind velocity will be developed, it judged that it can reached to the target of low CO2 traffic technology development using the reduction of material cost and the lower consumption of steel. The objective of this study is to improve the soundproofing panel and to develop the air-passing soundproofing panel for the replacement of aluminum sound proofing panel which is more emit CO2 than other soundproofing panel. And, we tried to develop the reduction technology of CO2 emission through the development of air-passing soundproofing panel. At first, the flow and noise simulation were conducted for the purpose of the calculation of wind pressure on soundproofing wall and noise exposure level on receiver points according to the open ratio of air-passing soundproofing panel. And the 1st and 2nd mockup of air-passing soundproofing panel were made, and the design load test were conducted for these mockup.

• Journal of Korean Society of Transportation
• /
• v.22 no.7 s.78
• /
• pp.61-67
• /
• 2004

It is needed for one to design the better models estimating emission and then with the real time data, make the monitoring system simulating emission rate because of having built the basement of accepting real-time traffic information in ITS projects. The objective of the study is to develop the monitoring system visualizing air pollution to a certain place. It is based on the estimated emission from the patterns of individual vehicles and the changes of traffic flow. For constructing simulator, we loaded referring algorithm in actuality program and simulates the traffic flow movement in a microscopic viewpoint. The simulator is able to express not only the movement of each car but also to visualize processing the emission and diffusion of the air pollutant by computer program. Not only expresses the simulation process the angle of vision but it also cutting down environment expenses and improving the traffic impact assessment and the traffic impact assessment.

• Journal of Power System Engineering
• /
• v.21 no.3
• /
• pp.85-92
• /
• 2017

Global air traffic is forecast to grow at an average annual rate of around 5% in the next 20 years. The continuous growth of air traffic and raised environmental awareness put increasing pressure on aero engine manufacturers to reduce fuel burn and emissions. NEWAC are a new integrated program of the European Union with focus on innovative core engine concepts to achieve this problem. In this paper, Within NEWAC, active core engine configurations will be investigated. the investigation is focused on the optimal design of the CAC heat exchanger for active core. For optimal design of he CAC heat exchanger, the HTFS of basic design of heat exchanger are analyzed so as to proceed an optimization routines based on Response Surface Method(RSM) and Design of Experiment(DOE). As a result, CAC heat exchanger optimized by 1.0314 lb/s mass flow rate and 3.9058 mm TP of tube layout and 206.8181 mm height of heat exchanger and 918 tube number for heat transfer and pressure drop. We confirm the design optimization using RSM and DOE is useful on complex structure of heat exchanger.

• Atmosphere
• /
• v.33 no.4
• /
• pp.343-354
• /
• 2023

Turbulence produced on roadways is one of the major factors determining the dilution rates at the initial stage of traffic emissions of air pollutants and, thus, the distribution of air pollutants near the roadways. Field experiments were conducted on Gyeongbu Highway, one of the busiest highways in Korea, for 4~7 days in winter, spring, and summer. Two three-dimensional ultrasonic anemometers were installed on both sides of the highway to estimate turbulence intensities (vertical wind fluctuation and kinetic turbulence energy) induced by the roadway. Roadway-induced turbulence consists of three components: structural road-induced turbulence (S-RIT), thermal road-induced turbulence (T-RIT), and vehicle-induced turbulence (VIT). The contribution of T-RIT to the total RIT was insignificant (less than 10%), and the majority of RIT was S-RIT (by the highway embankment) and VIT. In this study, we propose the empirical relationships of VIT as a function of traffic density and wind speed under free-flow traffic conditions. Although this empirical relationship appears to underestimate the VIT, it can be applied to the air quality models easily because the relationship is simple and only needs readily obtainable input variables (wind speed and traffic information).