• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.265-266
• /
• 2015

The multi-environment PDF model coupled with flamelet generated manifolds(FGM) has been developed for a large eddy simulation of turbulent partially premixed lifted flame. This approach has a capability to realistically account for the transport and evolution of probability density function for mixture fraction and progress variable with the manageable computational burden. Using the tabulated chemistry, it is possible to track radical distributions which is important to predict autoignition process with the vitiated coflow environment. Numerical results indicate that the present yields the good agreement with experimental data in terms of mixture fraction, temperature, and species mass fractions.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.235-237
• /
• 2017

전투무선망을 통해 방공C2A 체계로부터 전송되는 표적거리는 전투무성망의 여러 가지 특성으로 인해 오차가 발생한다. 본 논문에서는 칼만필터를 이용한 거리추정 알고리즘의 성능을 향상 시켜 오차를 최소화할 수 있는 방법을 제안한다.

• 한국소음진동공학회논문집
• /
• 제17권6호
• /
• pp.539-546
• /
• 2007

Information storage devices using disks have a disk vibration at the frequency which is equivalent to the disk rotational speed. They also have a track vibration due to the disk eccentricity at the same frequency. In near field recording systems, the former affects the air-gap servo and the latter affects the tracking servo. In this paper, we introduce a novel control algorithm based on the internal model principle to both servos. A controller block designed by the principle is connected to the base lead-lag type compensator in parallel in order to cancel the repeatable run-out due to the disk vibration or eccentricity. Simulation and practical application of the algorithm on a near field recording system show good servo performance.

• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.260-266
• /
• 2002

DLC films were deposited on Si wafer by RF plasma assisted CVD using CH4 gas. Tribological tests were conducted using rotating type ball on disk friction tester in dry air. Four kinds of mating balls were used. The mating balls were made with stainless steel but apply different annealing conditions to achieve different hardness conditions. Testing results in all load conditions showed that the harder the mating materials, the lower the friction coefficient among the three kind of martensite mating balls. In case of austenite balls, the friction coefficients were lower than fully annealed martensite ball. The high friction coefficient in soft martensite balls seems to be caused by the larger contact area between DLC film and ball. The wear tracks of DLC films and mating balls could have proven that effect. Measuring the wear track of both DLC films and mating balls have similar tendency comparing to the results of friction coefficients. Wear rate of austenite balls were also smaller than that of fully annealed martensite ball. The results of effect of applying load showed, the friction coefficients were become decrease when the applying loads exceed critical load conditions. The wear track of mating balls showed that some material transfer occurs from DLC film to mating ball during the high friction process. Raman spectra analysis showed that transferred material was a kind of graphite and contact surface of DLC film seems to undergo phase transition from carbon to graphite during the high friction process.

• 대한기계학회논문집A
• /
• 제27권3호
• /
• pp.335-342
• /
• 2003

In this study, the effects of oxide layer formed on the contact parts of TiN coated ball and steel disk in sliding are investigated. Also wear mechanism to from the oxide layer and the characteristics of the oxide layer formation are investigated. AISI 52100 steel ball is used for the substrate of coated ball specimens. Two types of coated ball specimens were prepared by depositing TiN coating with 1 and 4 ${\mu}{\textrm}{m}$ in coating thickness. AISI 1045 steel is used for the disk type counter-body. To investigate the effect of oxide layer on the contact parts of the two materials, the tests were performed both in air for forming oxide layer on the contact parts and in nitrogen environment to avoid oxidation. And to study the effects of surface roughness of counter-body, TiN coating thickness and contact load of sliding test on the characteristics of oxide layer formation on counter-body, various tests were carried out. From the results, the friction characteristics between the two materials was predominated by iron oxide layer that formed on wear track on counter-body and this layer caused the high friction. And the formation rate of the oxide layer on wear track increased as the real contact area between the two materials increased as the contact load increased, the TiN coating thickness decreased and the surface of counter-body smoothened.

• 한국대기환경학회지
• /
• 제28권1호
• /
• pp.59-67
• /
• 2012

Platform screen doors (PSD) installed at 289 stations in Seoul metropolitan subway from November 2005 to December 2009, are expected to prevent death from a fall and improve air quality. In this study, we systematically surveyed changes in radon concentrations before and after PSD installation in Seoul metropolitan subway stations. By solid-state nuclear track detectors (SSNTD), the radon concentrations before and after the PSD installation were measured at 54 stations of 6 lines from 2 to 7 reported to have relatively high radon concentrations. Mean radon concentrations at platforms were decreased by approximately 56% from 121.7 Bq/$m^3$ to 54.0 Bq/$m^3$. Before PSD installation, mean radon concentrations were in the decreasing order for subway lines 7, 5, 6, 3, 4 and 2. On the other hand, after PSD installation the order was changed to 5, 6, 7, 3, 4 and 2. According to a radon map of Seoul metropolitan subway, the number of platforms where radon concentration over was 74 Bq/$m^3$ decreased from 38 to 12 after PSD installation.

• 한국환경보건학회지
• /
• 제45권6호
• /
• pp.658-667
• /
• 2019

Objective: This study was designed to compare construction types and seasonal radon concentrations in dwellings in Jeollabuk-do Province in Korea. Methods: The measurement of indoor radon concentrations in 79 dwellings using alpha-track detectors was performed every three months (seasonally) over one year between 2015 and 2016. Also, Radon concentrations in soil were measured in spring to investigate the correlations between the concentrations in soil and indoor air. Results: The annual average concentration of indoor radon for dwellings was 89.7±72.1(GM: 72.4) Bq/㎥, with a range (min-max) of 17.2 to 505.4 Bq/㎥. The highest indoor radon concentration was measured in winter and the lowest was shown in summer. The geometric mean of radon concentration in winter was 1.03-2.58 times higher than other seasons. Radon concentrations in soil were investigated at the depth of 1 m, and the concentrations ranged from 1,780 Bq/㎥ to 123,264 Bq/㎥. This showed low correlations with indoor radon concentrations.

• 한국철도학회논문집
• /
• 제18권2호
• /
• pp.87-93
• /
• 2015

선형동기전동기(이하 LSM)를 기반으로 하는 자기부상열차의 경우 부상전자석의 대응면이 LSM의 고정자로 요철 형상을 가지고 있기 때문에 주행 시 부상력이 급변동하는 특징이 있다. 특히, LSM을 이용하는 초고속 자기부상열차의 경우, 고속주행을 위해 부상전자석을 대차에 직접 채결하는 방식을 채택하는데 이러한 체결방식 때문에 인접한 부상전자석들간의 운동 간섭이 심하여 대차에 피치운동이 심하게 발생한다. 이러한 문제들을 해소하기 위해 본 논문에서는 피치운동을 반영한 자기부상제어를 소개한다. 제안하는 부상제어는 개별 부상 전자석의 부상공극을 일정하게 유지시켜 줄 뿐만 아니라 인접한 부상전자석들간의 상대운동을 저감하는데 큰 효과가 있다. 제안한 개념을 시험용 자기부상열차에 적용하여 그 효용성을 검증한다.

• 한국군사과학기술학회지
• /
• 제16권4호
• /
• pp.523-536
• /
• 2013

A recent air defense missile system is required to have a capability to intercept short-range super-high speed targets such as tactical ballistic missile(TBMs) by performing engagement control efficiently. Since flight time and distance of TBM are very short, the missile defense system should be ready to engage a TBM as soon as it takes an indication of the TBM launch. As a result, it has to predict TBM trajectory accurately with cueing information received from an early warning system, and designate search direction and volume for own radar to detect/track TBM as fast as it can, and also generate necessary engagement information. In addition, it is needed to engage TBM accurately via transmitting tracked TBM position and velocity data to the corresponding intercept missiles. In this paper, we proposed a method to estimate TBM trajectory based on the Kepler's law for the missile system to detect and track TBM using the cueing information received before the TBM arrives the apogee of the ballistic trajectory, and analyzed the bias of prediction error in terms of the transmission period of cueing data between the missile system and the early warning system.

• Tuberculosis and Respiratory Diseases
• /
• 제51권6호
• /
• pp.585-589
• /
• 2001

저자들은 심한 천식발작으로 내원한 43세 여자환자에서 응급 기관내 삽관 및 AMBU 양압환기에 종격동기흉, 복강기종, 후복강기종 및 피하기종이 합병되었으나 내과적 치료로 회복된 1예를 경험하였기에 문헌고찰과 함께 보고하는 바이다.