• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.97-103
• /
• 2002

Vibration isolation technology using an air spring and laminated rubber bearing is widely used because it has excellent vibration isolation characteristics. In the part of that, we usually make use of the self-damped air suing. It is occupied two chambers, restrictor, diaphragm and load plate. Two chambers contain compressed air and the volume of chambers and the area of load plate give a definition of stiffness and load. The restrictor and the volume ratio of two chambers give a definition of damping ratio. The conventional model of restrictor is made of one orifice and it causes turbulent flow in the orifice at the region of large deflection. The stillness of air suing is larger and the damping is lower in the region of large deflection. In the multi-orifice case, the stiffness is similar to air spring with one orifice but damping ratio is larger than conventional air spring. And damping ratio is smaller than conventional air suing in small deflection region. Deflection is small in the region of high frequency so small damping is better than large damping. As a result, we can reduce the storage stiffness of air suing in the wide region of deflection and increase the damping ratio in the region of large deflection. After this, we will try to and the relation of Reynolds Number and Flow Resistance then we are going to make another restrictor for air spring to improve damping ratio and stiffness.

• 설비공학논문집
• /
• 제12권11호
• /
• pp.994-1003
• /
• 2000

Control algorithms for the absorption air conditioning system may be developed by suing dynamic models of the system. The simplified effective dynamic models, which can predict the dynamic behaviors of the system, may help the development of effective control algorithms for the system. In this study, a dynamic simulation program for the absorption air conditioning system was developed. Dynamic models for an absorption chiller, a cooling tower, an air handling unit, a boiler, a three way valve, a controller, and a duct were developed and programed. Control algorithms for the absorption chiller, the cooling tower, and the air handling unit were selected, and analyzed to show the effectiveness of dynamic models. From the simulation results, it may be concluded that this simulation program may be effectively used for the development of optimal control algorithms of the absorption air conditioning system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.626-633
• /
• 2000

An air spring which is a part of the railroad vehicle suspension system is used to reduce and absorb the vibration and the noise. Main components of the air spying are a cord reinforced rubber bellows, a upper plate, a lower plate and a stopper rubber spring. The characteristics of the air spring which are the load capacity, the vertical and the horizontal stiffness are depended on the configuration of rubber bellows, the angle of cord and the mechanical properties of cord. The computer simulation using commercial finite element analysis codes are executed to predict and evaluate the load capacity and the stiffness. The appropriate shape and cord angle of the air suing are selected to adjust the required performance of the air spring. Several samples of the air spring are manufectured and experimented. It is shown that the results by computer simulation are in close agreement with the test results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.993-998
• /
• 2002

watches, air bearings and printed circuit hoards (PCB). However, it is not easy to determine optimum cutting conditions since the micro drilling process is very sensitive to various disturbances. Also, undesirable characteristics to optimize the micro drilling are small signal-to-noise ratios, drill wandering motions and high aspect ratios. Thus, in this study, experimental design methods are applied to determine optimum cutting conditions. Suing the methods, three cutting parameters, fred, step and curving speed are optimized to minimize thrust forces. Obtained conditions are verified through required experimental works. As the results, it is shown that the experimental methods can be applied to micro drilling processes to determine Optimum Cutting Conditions.

• 제어로봇시스템학회논문지
• /
• 제7권2호
• /
• pp.152-159
• /
• 2001

This paper presents a development of the recoil rod pull force measurement system suing the load cell with a sleeve normally available in the recoil system test. The commercial load cell cannot be used in the test of recoil system floating the breach contact point freely in the air. The load cell is designed and manufactured to meet the recoil system test condition. Theoretical analysis and experimental results show that the accuracy of the developed measurement system is within $\pm$0.5%. We notice that the measurement technique proposed in this paper is accurate and useful in the recoil rod pull force measurement of the recoil system.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVII)
• /
• pp.456-462
• /
• 2005

The objective of this study was to develop a removal process by which $H_2S$ could be biologically removed from the odoriferous gases generated in the waste food recycling process. In order to develop this process we were first required to select a proper biofilter support protocol. When the selected biofilter equipment was then tested suing a synthetic odoriferous gas containing 600 ppm of $H_2S$, we noted a maximal removal rate of 658 $g-H_2S/m^3{\cdot}hr$, using polypropylene fibrils as supporting materials. Under identical experimental conditions, we obtained a value of 411.2 $g-H_2S/m^3{\cdot}hr$, using polyurethane as a support material. We also conducted a trial in which volcanic stone was utilized as a support material, and in this trial, we logged a maximal 105.1 $g-H_2S/m^3{\cdot}hr$ removal rate. As the result of our experiments, we concluded that polypropylene fibrils constituted the ideal material for the removal of $H_2S$ gas via biological treatment.

• 유통과학연구
• /
• 제16권7호
• /
• pp.17-24
• /
• 2018

Purpose - This study focuses on the quality of nonverbal communication by the flight attendants at the airline, and the factors that contribute to improve customer behavior, thereby providing positive implications for corporate management. Research, design, data, and methodology - For the empirical analysis of this study, reliability analysis and frequency analysis were conducted. T-test and ANOVA analyses were performed. In addition, the effects of nonverbal communication have on customer behavior have regressed analysis. The collected data was empirical suing the SPSS Win 18.0. Results - Among the non-verbal communication qualities were found to significantly influence customer attitudes, and demographic differences in airline flight attendants were also shown to influence their perceptions. Empirical analysis revealed significant differences in demographic characteristics between gender, age and airlines used. Conclusions - All of the non-verbal communication's attributes were found to significantly impact customer attitude. It is used to train the importance of nonverbal communication quality for the role of cabin crew members and to enhance the loyalty of the customers to Airline. This study identifies the relationship between the impact of non-verbal communication quality on customer attitudes and implies the importance of non-verbal communication quality for airline flight attendants. Also, this study suggests that there is a close mechanism between the nonverbal communication and the customer attitudes to airlines.

• 항공우주정책ㆍ법학회지
• /
• 제30권2호
• /
• pp.279-310
• /
• 2015

몬트리올협약은 국제항공운송에서 발생한 사고에 따른 여객의 사망이나 상해에 관하여 항공운송인의 책임을 배타적으로 규율하고 있다. 국제항공산업의 재정적인 안정과 항공사를 파산으로 이끌 수도 있는 과도한 배상책임으로부터 항공산업을 보호할 목적으로 몬트리올협약은 금전배상에 있어서 책임제한제도를 운영하고 있다. 하지만 여객의 사망이나 상해가 항공사 혹은 그 대리인의 직접적인 과실이나 불법적인 작위 혹은 부작위의 결과라는 점이 인정될 경우에 그러한 책임제한원칙은 유지될 수 없고, 손해배상을 청구하는 자는 협약이 정하는 제한책임액 이상의 배상을 받을 수도 있다. 한편, 몬트리올협약은 손해배상을 청구하는 원고가 소송을 제기할 수 있는 법정지에 관해서도 관할권 관련 조항에서 일정한 제한을 두고 있다. 이러한 관할권은 특히 피고 항공운송인의 영업소나 원고의 주소지가 주요 결정요인이 된다. 지난 2015년 3월, Germanwings 항공사 9525편에 발생한 사고는 당시 심한 우울증을 앓고 있었던 부기장의 의도적인 행동이 원인이었고, 해당 항공기가 프랑스령 알프스산맥에 추락하면서 대부분의 탑승 여객과 승무원의 사망이라는 결과로 이어졌다. 보도 자료에 따르면 사고 직후, 항공사는 사망승객의 국적에 따라 금액의 차이는 있지만 미화 8,300불에서 4백5십만불에 이르는 손해배상액을 합의금으로 제시하였다고 한다. 이러한 합의제안에 대해 몇몇 유가족들은 보다 많은 배상액을 얻기 위하여 미국과 같이 피해자에게 관대한 법정지에서 소송제기를 계획하고 있다고 한다. 본 논문은 위 사고와 관련하여 두 가지 쟁점에 관하여 기술하고 있다. 첫째, 본 논문은 몬트리올협약상 관할권 조항과 관련하여 미국 시민이 아닌 피해자가 미국 법정지에서 소송을 제기할 가능성에 대해 살펴보았다. 둘째, 본 사고의 직접적인 원인이 부기장의 의도된 사고유발 행동이었던 점에서 사안의 항공사는 몬트리올협약이 규정하고 있는 책임제한원칙이 부정될 가능성이 있다. 이에 관하여 본 논문은 해당 항공사가 그럼에도 불구하고 협약상 책임제한규정을 원용할 수 있는 가능성이 있는지 여부를 중점적으로 살펴보았다.