• 대한가정학회지
• /
• 제20권3호
• /
• pp.19-24
• /
• 1982

This study was carried out to investigate the relationship between the water resistance and the air permeability. The results are as follows; 1. In case of the water proofing fabrics, We cannot find that there is any relationship between the water resistance and the air permeability according to the kinds of finishing, while in case of the water repellent finished fabries, we can find that there is a correlationship between them, especially the hydrostatic pressure and the air permeability are found to have negative correlation. 2. In case of the water proofing fabrics, the relationship between the water resistance and the air permeability is not affected by the thickness of the fabrics. On the other hand, in case of the water repellent finished fabrics, the relationship between them is affected by the thickness of the fabrics. Especially, the relationship between the hydrostatic pressure and the air permeability as well as the relationship between the water repellency and the air permeability is effect much by the thickness of the fabrics, too. 3. In case of the water proofing fabrics, the relationship between the water resistance and the air permeability is not affected by fabric count. On the otherhand, in case of the water repellent finished fabrics, the relationship between them is affected by the fabric count. Especially, the relationship between hydrostatic pressure and the air permeability, and the relationship between the water proof and the air permeability are affected much by fabric count.

• Journal of the Korean Wood Science and Technology
• /
• 제24권4호
• /
• pp.22-31
• /
• 1996

Air permeabilities for both sapwood and heartwood of the three softwoods(Picea jezoensis, Larix gmelini, Pinus sylvestris), imported from the Russian Far East, in the three different structural directions were measured using steady-state rotameter method. After measuring permeability, the liquid absorption into the longitudinal permeability specimens was measured, and then related with the measured permeability. The longitudinal permeability was overwhelmingly greater than the transverse permeability, with the radial direction showing higher permeability than the tangential direction. There appear to be species differences in permeability of the three softwoods. The mean longitudinal sapwood permeability of P. jezoensis(3.300darcy) and P. sylvestris(3.028darcy) were considerably greater(ca. 25times) than that of L. gmelini(0.134darcy). Also the average longitudinal heartwood permeability of P. jezoensis(0.300darcy) was about 10 times as great as that of P. sylvestris(0.029darcy) and L. gmelini(0.024darcy). The average calculated radius of pit openings in the heartwood was $0.101{\mu}m$ for L. gmelini, $0.152{\mu}m$ for P. sylvestris for and $0.703{\mu}m$ for P. jezoensis. Heartwood permeability increases with the increase in radius of pit pore and the decrease in ring width and in extractive content, even though the correlation between permeability and its affecting factors was dependent on species. However, there was an inverse relationship between specific gravity and permeability, showing poor correlation between them. The correlation between air permeability and liquid retention was fairly high, so it was revealed that prediction of liquid absorption into the wood by using permeability was feasible.

• 설비공학논문집
• /
• 제13권12호
• /
• pp.1282-1287
• /
• 2001

This study presents the numerical analysis of natural convection of a micro- environments with air permeability in the clothing air-layer. As a numerical model the clothing air layer of shoulder and arm were adopted. Finite volume method for two-dimensional laminar flow was used for the analysis of flow and thermal characteristics of velocity, temperature and concentration in the air layer between body and clothing. As temperature boundary conditions, a body skin has a high temperature with $34^{\circ}C$ and the environmental temperatures are 5, 15 and $25^{\circ}C$ for various permeability coefficients. The distributions of concentration, temperature and velocity are shown that two large cells form at horizontal and vertical air layer, respectively. As the temperature difference between body skin and environment decreases, the heat transfer is decreased rapidly.

• International Journal of Concrete Structures and Materials
• /
• 제19권1E호
• /
• pp.41-48
• /
• 2007

Addition of latex to concrete is known to increase its durability and permeability. The purpose of this study is to analyze air void systems in latex-modified concretes using a reasonable and objective method of image analysis with such experimental variables as water-cement (w/c) ratios, latex contents (0%, 15%) and cement types (ordinary portland cement (OPC), high-early strength (HES) cement and very-early strength (VES) cement). The results are analyzed by spacing factor, air volume (content) after hardening, air void distribution and structure. Additionally, air void systems and permeability of latex-modified concrete (LMC) are compared by a correlation analysis. The results are as follows. The LMC of the same w/c ratio showed better air entraining (AE) effect than OPC with AE water reducer. The VES-LMC showed that the quantity of entrained air below $100{\mu}m$ increased more than four times. For the case of HES-LMC, microscopic entrained air between the range of 50 to $500{\mu}m$ increased greater than 7 times even in the absence of anti-foamer. Although spacing factor was measured rather low, the permeability of latex-modified concrete was good. It is construed that air void system does not have a considerable effect on the property of latex-modified concrete, but latex film (membrane) has a definite influence on the durability of LMC.

• 콘크리트학회논문집
• /
• 제13권3호
• /
• pp.277-284
• /
• 2001

경화콘크리트는 골재와 시멘트 수화물에 의한 매트릭스 구조로 되어진 다공체이기 때문에 내부에 다양한 크기와 형태의 공극을 갖으며, 공기투과성을 갖게 된다. 이러한 투기성능은 탄산가스의 침투.확산에 따른 중성화속도와 산소와 물의 침투에 따른 철근의 부식속도를 결정하게 되어 철근콘크리트 구조물의 내구성과 밀접한 관련이 있는 것으로 보고되고 있다. 한편, 중성화속도 및 투기성능은 표면 마감재 및 콘크리트의 함수율에 의해 크게 영향을 받게 된다. 이에 본 연구는 물-시멘트비 및 마감재의 종류, 양생조건이 콘크리트의 중성화속도 및 투기성에 미치는 영향을 검토하고, 양생조건에 따른 함수상태가 투기성에 미치는 영향을 검토하였다. 본 실험결과 중성화속도 및 투기성은 물-시멘트비, 마감재의 유무 및 종류, 양생조건에 의해 크게 영향을 받으며, 콘크리트의 투기계수는 중성화속도계수와 밀접한 관련이 있는 것으로 나타나, 향후 중성화속도를 평가함에 있어서 투기계수를 요인으로 추정 가능할 것으로 사료된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.403-408
• /
• 2000

Hardened concrete contains pores of varying types and sizes, and therefore the transport of air through concrete can be considered. The rate of permeability will not only depend on the continuity of pores, but also on the moisture contents in concrete. In this paper, the effects of curing conditions and moisture content ratios on the carbonation and air permeability are investigated according to the accelerated carbonation test. The results are follows. 1) Compressive strength, carbonation velocity and air permeability are influenced by the moisture content and curing method. 2) The relationship between carbonation velocity coefficient and air permeability coefficient has been quite well established.

• 패션비즈니스
• /
• 제9권3호
• /
• pp.114-124
• /
• 2005

Based on the previous study, three types at synthetic fibers comprising nylon, PET, and acrylic fibers were investigated in this study. The effect at mordanting on the air-permeability and dyeing properties at fabrics was investigated. The effect at rinsing process on the air-permeability and color was quantitatively investigated by rinsing the mordanted fabric specimens 1$\sim$3 times after mordanting. The air-permeability changed peculiarly according to the characteristics of the tiber materials after mordanting. The air-permeability values of nylon and acrylic fabric specimens dropped significantly after mordanting. On the other hand, those of PET fabric specimens hardly changed after mordanting. The metal ions absorbed on the fibers of nylon and acrylic fabrics did not show the mordanting effect. Regardless of mordanting, cochineal dyestuff made direct links with the molecular chains in nylon fabrics exhibiting dark colors. After dyeing acrylic fabrics, the color did not develop at all, even though partial components of the cochineal dyestuff were absorbed apparently.

• 패션비즈니스
• /
• 제8권6호
• /
• pp.137-145
• /
• 2004

According to the experimental results, it has been reported by several researchers that the air-permeability values of the fabrics mostly decreased by the mordanting during the dyeing procedure. The exact quantitative information, however, has not been presented so far. In this study, the change of the fabric air-permeability was investigated quantitatively. At the same time, the change of the fabric air-permeability according to the dyeing procedure. In order to investigate the possibility of the detachment of the metal ions on the fiber or fabric surface, the change of the air-permeability was investigated after several rinsing of the mordanted fabrics. By comparing the color differences of the cochineal dyed fabrics which were subjected to rinsing procedure after mordanting, the effect of the rinsing of the mordanted fabrics on the dyeing of fabrics was investigated. At the range of mordant concentration, 2% Cu, 2% Sn, 2% Fe, 2% Cr, 5% Al, the metal ions are not excessively absorbed on the fiber surface. Also, any remarkable detachment of the metal ions does not accompany after the mordanting with the subsequent rinsing procedure.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.648-653
• /
• 2001

This study represents the numerical analysis of natural convection of a microenvironments with a air permeability in the clothing air-layer. The clothing air layer of shoulder and arm was used for numerical analysis model. As a numerical analysis method, we adopted a finite volume method for two-dimensional laminar flow, and analyzed the flow and thermal characteristics of velocity, temperature and concentration in the air layer between body and clothing. As a temperature boundary conditions, we considered that a body skin has a high temperature with $34^{\circ}C$ the environmental temperatures are $5,\;15\;and\;25^{\circ}C$ for various permeability coefficients. The distributions of concentration, temperature and velocity were showed that two large cells were. formed at horizontal and vertical air layer, respectively. As the temperature difference between body skin and environment decrease, the heat transfer was decreased rapidly.

• 유기물자원화
• /
• 제20권3호
• /
• pp.71-82
• /
• 2012

국내에서 퇴비화 첨가제로 주로 사용되는 재료로는 톱밥과 목편(woodchip)으로서, 이들 첨가제는 주로 적정 수분함량 및 C/N비의 조절에 주안점을 주고 사용되고 있다. 하지만 톱밥과 목편(woodchip)은 서로 상이한 물리적 특성을 나타내고 있으며, 첨가제의 공기투과성에 대한 연구는 활발히 이루어지지 못하고 있다. 본 연구에서는 퇴비화 첨가제로 주로 사용되고 있는 톱밥과 목편(woodchip)의 혼합비율에 따라 용적 밀도, 수분함량, 공기공극, 입자크기, 공기유속 등이 공기투과성에 미치는 영향을 파악하였다. 모든 첨가제에서 수분함량이 증가함에 따라 공기공극율은 감소하고 입자크기는 증가하였으며, 특히 목편의 혼합비율이 높아짐에 따라 이러한 효과는 더욱 증대되는 경향을 나타내었다. 공기공극율과 수분함량은 선형의 관계로서 공기투과성에 미치는 영향은 매우 유사하게 나타났다. 건조수분함량 0.25~0.43(d.b.)(습윤수분함량으로는 20~30%) 이후의 구간에서는 공기공극율이 낮아짐에도 불구하고 압력손실이 감소함으로써 공기투과성이 개선되는 현상을 보이고 있다. 특히 입자크기가 5 mm로 커질 때까지 압력손실은 지수적으로 감소하여 공기투과성이 현저히 개선되고 있다. 이는 수분함량 증가에 따라 미세입자가 입단화됨으로써 대공극이 증가하고 이에 따라 공기이동성이 원활해 졌기 때문으로 여겨진다. 따라서 첨가제의 입자크기가 공기공극율이나 수분함량에 비하여 공기투과성에 미치는 영향이 매우 높았으며, 퇴비화시에는 초기 입자크기를 5 mm 이상으로 조절하는 것이 적합하다.