• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.1
• /
• pp.5-13
• /
• 2011

This research proposed the space planing methode and diagrams of restaurant kitchens to improve hygiene by analyzing the related contents collected from books and researches in interior design and HACCP (Hazard Analysis and Critical Control Point). HACCP is an effective and scientific hygiene system for food safety in order to prevent cross-contamination from food hazards. Based on the analyses, improvement of food production environments like restaurant kitchens is necessary for food hygiene. The space planing methode of restaurant kitchens to improve hygiene are followings: The circulation planing is that the direction of movement of the food, workers, waste, and dishes should be fractionated and managed for cross-contamination prevention. The space separation planing is that the spaces in the kitchen should be classified and divided into contaminated area and non-contaminated and clean area depending on the degree of cleanliness. The zoning is space arrangement with feed-back process to check the possible points of cross-contamination and correct space arrangement until the possibility of cross-contamination disappear in kitchen. However, if cross-contamination is unavoidable in some points in restaurant kitchens, hygiene facilities such as washing rooms, pass rooms, and double doors with air-shower should be located in order to remove contamination.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.1205-1214
• /
• 2020

The poverty level in Buru Regency is still high, despite the relatively stable economic growth. For this reason, the purpose of this study was to (1) Identify the leading commodity in each district in Buru Regency; (2) Analyze the effect of road infrastructure and leading commodities on poverty. The findings show that the most sparsely populated district is Fena Leisela, with mangoes as the leading commodity. Pineapple, langsat, apple rose, cabbages, cashews, coffee, cashew, melon, and watermelon are the leading products in Air Buaya, Batabual, Waplau, Lolong Guba, Lilialy, Waelata, Namlea, Kaiely Bay, and Waeapo, respectively. Additionally, the results also indicate that road infrastructure and leading commodities have a significant effect on poverty alleviation in Buru Regency. It means that improving infrastructure and increasing leading commodities production reduce poverty in the region. Good road infrastructure can promote connectivity between regions so that it can accelerate and expand economic development. The provision of infrastructure that encourages connectivity will reduce transportation costs and logistics costs to increase product competitiveness and accelerate the economic movement. When the road infrastructure in Buru Regency improves and new roads are built, it can improve transportation access, it will reduce the living cost for the poor and increase income, and open up opportunities for the poor to benefit from economic growth.

• Journal of the Korean housing association
• /
• v.21 no.2
• /
• pp.133-144
• /
• 2010

The purpose of this study is to analyze the uses and exterior design of the balconies in urban housing from the ancient times to the 19th century. In doing so, the paper seeks to investigate the cultural identity of the balcony in urban housing. The results are as follow. First, in the urban housing the balcony space were made for protection from the heat, light and ventilation; gardening; views toward the streets, city, waterside, inner court, domain for men; breathing french air; watching ceremony, festivals and events; simple houseworks like drying, carpet cleaning and hair coloring; lever installation and fire escape. Second, as part of exterior design the typical projecting characteristic of the balconies was emphasized and they became an impotent decorative element. The monotonous facade changed to a lively design with a rhythmical sense. On the facade the effects of horizontal movement, symmetry or asymmetry from the main entrance, and the center-projection (rialto) were created. In the urban housing the balconies were used for cultural activities which supplement and enlarge the function of the interior space, and moreover the rich effects of the facade contributed to the creation of attractive urban landscape.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.213-219
• /
• 2001

In this paper, particle velocity of slurry flow, a kind of solid-particle two phase flow, was measured by using a particle tracking velocimetry. Particles are modeled by sphere-shaped glass whose diameters are 3mm, 5mm, and 7mm At first, a particle which is falling in the water is captured and analyzed to give their free falling velocity. The falling velocity was very high up to about 4m/sec in the air, which needs special algorithm for the accurate measurement. For the upwelling slurry flow in the straight duct, there are some noises caused by cavity. However, the effect was so small that it does not affect the measurement of large particles. From the preliminary study of applying the PTV to measurement of particle movement in slurry flow, we could find out the optimum value of parameters: threshold value., searching area radius and correlation area size.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2011.04a
• /
• pp.261-266
• /
• 2011

The purpose of this study was to identify the perception of residents on green home and their green residential life. For this study, a questionnaire survey was conducted and the items consisted of whether green home was perceived and how well green residential life was maintained in 6 types of environments. A total 118 responses of residents living in apartments of Seoul Metropolitan Area were used for data analysis. Using statistical program SPSS Win 18.0, frequency analysis, t-test, One-way ANOVA, and factor analysis was employed. The major findings were as follows: 1) slightly more than half of the respondents were aware of green home, and the vast majority were in favor of the green home policy; 2) most of the respondents carried out guidelines of green residential life, and in particular, green living on air environment was well done, followed by consumption, waste, energy, traffic and water; 3) the six kinds of environments were subcategorized by using factor analysis, and 3 to 5 factors were included in each category of environment. Also, it was found that age, educational level, employment status of respondents, housing tenure and duration were related to the degree of green residential life. In midst of global movement toward sustainability, environmentally friendly living is not optional but mandatory, so it's important to change each individual's value on the relation between people and environment and to facilitate more environmentally conscious behaviors.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.24 no.2
• /
• pp.25-30
• /
• 2016

Obstacle defines all fixed and mobile objects, or parts thereof, that are located on an area intended for the surface movement of aircraft or extend above a defined surface intended to protect aircraft in flight or stand outside those defined surfaces and that have been assessed as being a hazard to air navigation. The airspace around airports are maintained free from obstacles so as to permit the intended aeroplane operations at the airports to be conducted safely and to prevent the airports from becoming unusable by the growth of obstacles around the airports. This is achieved by establishing a series of obstacle limitation surfaces or airspace imaginary surfaces that define the limits to which objects may project into the airspace. This is a case study that shows an application of obstacle limitation criteria, which must be maintained free from an critical obstacle, for specific conditions of two airports. For the purpose of the application, aeronautical studies/flight safety influence assessments were used to identify possible solutions and select a solution that is acceptable without degrading aviation safety.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.4
• /
• pp.24-30
• /
• 2017

Obstacle defines all fixed and mobile objects, or parts thereof, that are located on an area intended for the surface movement of aircraft or extend above a defined surface intended to protect aircraft in flight or stand outside those defined surfaces and that have been assessed as being a hazard to air navigation. Aircraft operations are based on electronic supporting systems using radio frequencies to assist pilots. These frequencies can receive outside interference that change their courses or power, such as distortion, attenuation or reinforcements by an obstacle. This is a preliminary case study that shows the relation of instrument flight procedures and the degree of interferences introduced by a planned obstacle, which is a main bridge post, within the service volume of the radio navigation aids. For the purpose of this study, the case airport's data and it's VOR/DME and ILS systems' limitations are analyzed, as well as the relation of interferences between the obstacle and navigation aides were reviewed with the internal regulations in Korea.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.3
• /
• pp.41-46
• /
• 2001

This paper discusses the feasibility of improving micro-machining accuracy by using two-dimensional(2-D) vibration cutting. Vibration cutting is generated by two piezo actuators arranged orthogonally : one is actuated by a sine curve voltage input, and the other is actuated by a phase-shifted sine curve voltage. A tool attached to the vibrator oscillates in a 2-D elliptical motion, depending on the frequencies, amplitudes, and the phase shifts of two input signals and the workpiece feedrate. Along the elliptical tool locus, cutting is done in the lower part, and non-cutting is done in the upper part. By this way a unique feature of 2-D vibration cutting, that is, air lubrication between a tool and chips, is caused. Another unique feature of 2-D vibration cutting was experimentally verified, that is, some negative thrust force occurs as the direction of chip movement on a tool rake face is reversed. Those features not only help chips flow smoothly and continuously but also reduce cutting force, which results in a higher quality machined surface. Through tool path simulations and experiments under several micro-machining conditions, the 2-D vibration cutting, compared to conventional cutting, was found to result in a great decrease in the cutting force, a much smoother surface, and much less burr.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1160-1165
• /
• 2004

The purpose of this study was to calculate three dimensional angular displacements, moments and joint reaction forces of the ankle joint during the waist pulling, and to assess the ankle joint reaction forces according to different perturbation modes and different levels of perturbation magnitude. Ankle joint model was assumed 3-D ball and socket joint which is capable of three rotational movements. We used 6 cameras, force plate and waist pulling system. Two different waist pulling systems were adopted for forward sway with three magnitudes each. From motion data and ground reaction forces, we could calculate 3-D angular displacements, moments and joint reaction forces during the recovery of postural balance control. From the experiment using falling mass perturbation, joint moments were larger than those from the experiment using air cylinder pulling system with milder perturbation. However, JRF were similar nevertheless the difference in joint moment. From this finding, we could conjecture that the human body employs different strategies to protect joints by decreasing joint reaction forces, like using the joint movement of flexion or extension or compensating joint reaction force with surrounding soft tissues. Therefore, biomechanical analysis of human ankle joint presented in this study is considered useful for understanding balance control and ankle injury mechanism.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.1
• /
• pp.30-45
• /
• 2013

Predicting monthly electricity price has been a significant factor of decision-making for plant resource management, fuel purchase plan, plans to plant, operating plan budget, and so on. In this paper, we propose a sophisticated prediction model in terms of the technique of modeling and the variety of the collected variables. The proposed model hybridizes the semi-supervised learning and the artificial neural network algorithms. The former is the most recent and a spotlighted algorithm in data mining and machine learning fields, and the latter is known as one of the well-established algorithms in the fields. Diverse economic/financial indexes such as the crude oil prices, LNG prices, exchange rates, composite indexes of representative global stock markets, etc. are collected and used for the semi-supervised learning which predicts the up-down movement of the price. Whereas various climatic indexes such as temperature, rainfall, sunlight, air pressure, etc, are used for the artificial neural network which predicts the real-values of the price. The resulting values are hybridized in the proposed model. The excellency of the model was empirically verified with the monthly data of electricity price provided by the Korea Energy Economics Institute.