• 센서학회지
• /
• 제23권4호
• /
• pp.266-271
• /
• 2014

Chemical sensors are used in various industrial facilities such high-risk and prevent the leakage of substances, important in life and environmental protection and the safe use of industry, used for management. In particular, high-temperature environments such as power generation equipment of the rotating part due to leakage generated by the various oil, power plants Shut Down, fire, work environment (exposure to various chemical solution and gas leak) and various water, air and soil pollution causes. Thus, over the long term through various channels such as crops and groundwater contamination caused by the slow, serious adverse effect on the ecosystem. In this paper, synthetic lube oil and high pressure hydraulic fluid leakage and immediately detect a new Printed Electronic implementation of technology-based film-type sensors, and its performance test. Thus, industrial accidents and environmental pollution and for early detection of problems, large accidents can be prevented. Experimental results of the synthetic lube oil and high pressure hydraulic fluid solution after the contact time depending on the experiment and the oil solution of the sensor material of the conductive porous PE resistance value by a chemical reaction could be confirmed that rapid increase. Also implemented in the film-type oil sensor electrical resistance change over time of the reaction rate and the synthetic lube oil is about 2 minutes or less, the high pressure hydraulic fluid is less than about 1 minute was. Therefore, more high-pressure hydraulic fluid such as a low volatility synthetic lube oils are the resistance change and the reaction rate was confirmed to be the slowest.

• 한국가스학회지
• /
• 제22권3호
• /
• pp.38-44
• /
• 2018

암모니아는 발전소의 탈질설비, 냉동장치의 냉매로 많이 사용되고 있으며, 증기압이 높고 공기보다 가벼운 물질로써 장외영향평가시 영향범위가 넓은 물질이다. KORA(Korea Off-site Risk Assessment supporting tool)를 활용하여 4가지 환경인자인 지면굴곡도, 밀폐여부, 운전온도 압력, 누출공 크기를 달리하여 영향범위를 산출하였다. 그 결과 굴곡도에 따른 영향범위는 약 4.62배 차이가 났으며 암모니아 저장탱크는 밀폐된 경우가 약 0.64의 저감율을 나타냈다. 저장온도와 압력에 따라 누출률이 증가되어 영향범위도 증가하는 형태를 보였으며 포화증기압 이상으로 저장시 영향범위는 $45^{\circ}C$에서 0.1 Mpa 당 평균 3.45%의 증가율을 나타냈다. 누출공 크기에 따른 영향범위 산정 결과는 누출구의 면적에 비례하는 것으로 나타났다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.824-827
• /
• 2003

The study of Sealless Cylinder is presented. The cylinder has a piston with air bearing. The piston has a partly cylindrical and partly conical shape. The description of system geometry is follows by the flow rate equations. Then pressure distribution and Bearing force equations are derived. Several non dimensional parameters are suggested. The relationship among bearing force, leakage flow and geometry of the bearing is investigated by simulation. And determination method for optimal design of sealless cylinder is given. A prototype of seatless cylinder which had rod bearing with four pockets, five pockets, and six pockets was built respectively.

• 설비공학논문집
• /
• 제12권7호
• /
• pp.649-658
• /
• 2000

Thermodynamic modeling of low-pressure scroll compressor was developed by combining continuity and energy conservation equation. Suction gas heating was considered using energy balance inside the low pressure shell. Pressure, temperature and mass of refrigerant-22 as a function of orbiting angle were calculated by solving the governing equations using fourth order Rung-Kutta scheme. Motor efficiency was taken by experiments with a variation of frequency. The developed model was applied to the analysis of an inverter driven scroll compressor with a variation of frequency, pressure ratio and operating conditions. The model was verified with the experimental results at the same operating conditions. The developed model was adequate to predict performance of the inverter driven scroll compressor as a function of operating conditions. Calculated parameters from the model were discharge temperature, mass flow rate, power input, COP, and thermodynamic properties with respect to orbiting angle. To enhance the performance of a scroll compressor, it is essential to diminish leakage at low frequency level and improve the mechanical efficiency at high frequency level.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1911-1915
• /
• 2003

The study of Sealless Cylinder is presented. The cylinder has a piston with air bearing. The piston has a partly cylindrical and partly conical shape. The description of system geometry is follows by the flow rate equations. Then pressure distribution and Bearing force equations are derived. Several non dimensional parameters are suggested. The relationship among bearing force, leakage flow and geometry of the bearing is investigated by simulation. And determination method for optimal design of sealless cylinder is given. A prototype of sealless cylinder which had rod bearing with four pockets, five pockets, and six pockets was built respectively.

• 설비공학논문집
• /
• 제18권7호
• /
• pp.603-611
• /
• 2006

A variety of schemes were sought for a mitigation of thermal stratification phenomenon in the branch piping of domestic nuclear power plant. Several mechanisms of thermal stratification occurrence were introduced in this paper. A number of factors were selected to find out the schemes for thermal stratification mitigation and the computational analysis were performed. The length of vertical branch piping, the diameter, the radius of curvature of the elbow, the direction of connection between main piping and branch piping, the slope of branch piping, the leakage flow rate, the installation of additional valve, the change of the 1st valve position and another branch piping connected with branch piping were mentioned as factors in this paper.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.409-414
• /
• 2009

Since cryogens are stored at very low temperatures, the cryogenic storage systems are quite sensitive to heat leaks. Even though the vessel operated under sealed condition with vacuum insulation and reflective coatings are used, the heat leakage into the vessel is still unavoidable. Therefore, this paper concerns with numerical study of self-pressurization used to analysis the optimum design with the variation volume fraction, effect of heat flux and storage pressure of liquid nitrogen. The result shows that as the volume fraction increases, the pressure rise reduces and the relatively at atmosphere pressure is better than the higher one. In addition, higher heat flux leads the pressure rise increases faster than low one. The additional of heat pipe system to reduce the pressure rise rate also has been done. By this comparison, the optimum design for storage umbilical cord blood can be selected.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제10권1호
• /
• pp.6-12
• /
• 2005

급격한 경제성장의 결과로서 최근까지 각종 유류관련 시설의 누출로 인한 토양 오염에 대한 관심이 고조되고 있다. 토양복원을 위하여 재래식 토양가스추출법(SVE)과 같은 공법이 사용되고 있으나 휘발성 유류성분의 제거에 적합하며 디젤, 방향족화합물 등과 같은 저휘발성 오염물의 제거에는 부적합한 결과를 보이고 있다. 본 연구에서는 디젤과 같이 저휘발성 유류성분을 제거하기 위한 효율적인 공기주입 및 SVE 공정 개발을 위해 디젤유의 개별성분들의 온도와 유량에 따른 제거효율, 수분함량에 따른 영향 평가를 실시하였다. 디젤범위의 오염성분(DROs)들은 온도의 증가에 따라 휘발성의 순서대로 제거되는 경향을 보이고 있다. 실험결과, $90\%$ 이상의 DROs 범위 내 오염물은 온도를 $100^{\circ}C$ 이상으로 유지할 경우 효과적으로 SVE 방법에 의하여 제거할 수 있다고 판단된다. 유량이 증가함에 따라 오염물이 토양 내 잔류하는 비율이 빠르게 감소하지만 유량이 40cc/min를 초과하면 감소 폭이 크지 않았으며 이는 큰 유량에 대하여 오염물이 휘발되는 속도에 있어서 물질전달상의 제한에 기인한다고 판단된다. 수분함량에 영향은 DROs성분 중 n-decane은 적은 것으로 나타났으나 다른 오염성분들은 수분이 존재함에 따라 제거효율이 좋아지는 결과를 나타내었다.

• 터널과지하공간
• /
• 제21권5호
• /
• pp.394-405
• /
• 2011

본 연구에서는 복공식 지하 압축공기에너지 저장공동의 역학적 변형 및 누출 거동의 복합거동을 파악할 목적으로 비등온 다상다성분 유체유동 및 역학적 거동의 연계해석이 가능한 TOUGH-FLAC 해석을 실시하였다. 지하압축공기에너지 저장 공동의 초기 및 장기 운영 과정에서 고압 압축공기 인입 입출에 따른 콘크리트 라이닝 내부에 발생하는 응력 양상을 살펴보고 저장공동 내부 압력 및 온도 변화를 파악함으로써 기밀성능을 평가하였다. 최대 저장공동 운영압력 8 MPa 조건에서 콘크리트 라이닝 내부에서는 공기침투압에 의한 유효응력의 감소와 접선방향의 인장응력의 증가에 따라 인장균열이 발생할 수 있음을 확인하였다. 콘크리트 라이닝 내부의 인장균열 발생에 따른 투과특성 증가 모델을 이용한 해석 결과, 저장공동 천정부 및 측벽부 일부에서 인장파괴가 발생하여 이들 영역에서의 투과계수는 초기 $10{\times}10^{-20}m^2$에서 $5.0{\times}10^{-13}m^2$까지 증가하였다. 한편, 콘크리트 라이닝 내부 인장균열 발생 및 투과특성 증가에도 불구하고 저장공동 내부 압축공기 압력은 주변 암반의 기밀성능으로 인해 일정하게 유지되고 공기누출량은 일일주입량의 0.02%에도 못 미쳐 복공식 지하 압축공기에너지 저장공동의 유효성을 확인할 수 있었다.

• 한국안전학회지
• /
• 제25권6호
• /
• pp.98-102
• /
• 2010

LPG (Liquefied Petroleum Gas) vehicles in metropolitan area are being applied to improve air quality and have been proven effective for the reduction of air pollutant. In addition, the demand of gas as an eco-friendly energy source has being increased. With the LPG filling station is also increasing every year. These gas stations are required to install the securest storage tank because of possibility of causing huge loss of life and property. Therefore, in this paper, underground containment type is proposed as installation of the LPG storage tank using Taguchi method, which is considered to be more safe, economical, efficient, easy checking and simple construction method than any other. If leakage, economics, real estate utilization rate, safety, easy to check, simple construct about above ground, buried underground and underground containment storage tank are analyzed by Taguchi method, real estate utilization rate, economic and safety in turn are improved. Therefore, the underground containment storage tank is a optimal installation technology.