• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.366-372
• /
• 2007

Self-sensing measurement of piezo inkjet and its application are discussed. The pressure wave inside the inkjet dispenser was measured by current measurement due to self-sensing capability of PZT. The pressure wave measured from current was verified by commercially available laser vibrometer. Here, two applications using self-sensing signal were discussed: waveform design for high speed jetting and condition monitoring. For waveform design, two pulse waveform was designed based on self-sensing signal such that the pressure wave after droplet formation can be minimized. For condition monitoring, self-sensing signal was shown to be effective in detecting air bubble trapped in inkjet printhead.

• 한국가시화정보학회지
• /
• 제6권2호
• /
• pp.9-13
• /
• 2008

The reproducibility of water droplet formation which is indispensible in the investigation of a drop-on-demand piezoelectrically driven inkjet was verified by checking the size of droplet and distance from the nozzle tip of inkjet head to droplet. Based on the reproducibility of droplet formation, we visualized the formation of micro-scale droplets by acquiring consecutive images at the jetting frequency of 500 Hz for which air bubbles were not generated. Two different electric waveforms were used to drive the piezoelectric actuator. The visualization system consists of a high-speed camera that can capture images up to 250,000fps, a long-distance microscope and a halogen lamp as a light source.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.369-372
• /
• 2002

In this research, a vision system for detecting tool breakage which is hardly detected by such indirect in-process measurement method as acoustic emission, cutting torque and motor current was developed and embedded into a PC-NC system. The vision system consists of CMOS image sensors, a slit beam laser generator and an image grabber board. Slit beam laser was emitted on the tool surface to separate the tool geometry well from the various obstacles surrounding the tool. An image of tool is captured through two steps of signal processing, that is, median filtering and thresholding and then the tool is estimated normal or broken by use of change of the centroid of the captured image. An air curtain made by the jetting high-pressure air in front of the lens was devised to prevent the vision system from being contaminated by scattered coolant, cutting chips in cutting process. To embed the vision system to a Siemens PC-NC controller 840D NC, an HMI(Human Machine Interface) program was developed under the Windows 95 operating system of MMC103. The developed HMI is placed in a sub window of the main window of 840D and this program can be activated or deactivated either by a soft key on the operating panel or M codes in the NC part program. As the tool breakage is detected, the HMI program emit a command for automatic tool change or send alarm to the NC kernel. Evaluation test in a high speed tapping center showed the developed system was successful in detection of the small-radius tool breakage.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.470-470
• /
• 2012

Organic thin film transistors (OTFTs) backplane constitute the active elements in new generations of plastic electronic devices for flexible display. The overall OTFTs performance is largely depended on the properties and quality of each layers of device material. In solution based process of organic semiconductors (OSCs), the interface state is most impediments to preferable performance. Generally, a threshold voltage (Vth) shift is usually exhibited when organic gate insulators (OGIs) are exposed in an ambient air condition. This phenomenon was caused by the absorbed polar components (i.e. oxygen and moisture) on the interface between OGIs and Soluble OSCs during the jetting process. For eliminating the polar component at the interface of OGI, the role of high vacuum seasoning on an OGI for all solution processable OTFTs were studied. Poly 4-vinly phenols (PVPs) were the material chosen as the organic gate dielectric, with a weakness in ambient air. The high vacuum seasoning of PVP's surface showed improved performance from non-seasoning TFT; a $V_{th}$, a ${\mu}_{fe}$ and a interface charge trap density from -8V, $0.018cm^2V^{-1}s^{-1}$, $1.12{\times}10^{-12}(cm^2eV)^{-1}$ to -4.02 V, $0.021cm^2V^{-1}s^{-1}$, $6.62{\times}10^{-11}(cm^2eV)^{-1}$. These results of OTFT device show that polar components were well eliminated by the high vacuum seasoning processes.

• 암석학회지
• /
• 제7권1호
• /
• pp.1-14
• /
• 1998

당산봉 화산은 제주도 서쪽 끝 해안에 위치하며, 응회구, 분석구, 용암대지 및 애추층 등으로 구성된다. 이들의 암상과 층서는 써제이언분출, 스트롬볼리언분출, 하와이언분출 순으로 전개되는 화산 과정과 외력쇄설 지표과정을 나타낸다. 당산봉 응회구는 마그마와 해수가 상호작용하여 스팀폭발함으로서 형성되는 써쩨이언분출에 의한 구조물이다. 이 분출은 초기에 습윤한 테프라수지상분사 활동상이었고, 중기에 보다 덜 습윤한 테프라의 연속분승 활동상과 테프라수지상분사 활동상이 교대로 진행되었으며, 후기에 보다 건조한 초써쩨이언분사 활동상으로 전환되었다. 분석구는 응회구의 축조로 외부 물의 완전한 제한으로 인해 써제이언분출이 종식되고 스트롬볼리안분출로 전환됨으로써 형성되었다. 이 분출은 초기에 분석 위주로 포출하였으며 후기에 스패터 위주로 포출하는 활동상으로 변화되었다. 용암대지는 화도내 마그마 개스의 고갈로 폭발력이 소진되어 하와이언분출로 전환되므로써 형성되었다. 이 분출은 초기에 용암분천 활동상 위주로 진행되었으나 후기에 용암분류 활동상으로 변화되었다.

• 한국잠사곤충학회지
• /
• 제36권2호
• /
• pp.147-151
• /
• 1994

고급성과 위생성이 우수한 견과 실용적 특성이 우수한 합성섬유의 서로의 장점만을 가진 이상적인 직물을 개발코저 시험한 결과 고치와 polyester 복합사(S/P 복합사)와 복합 직물의 특성은 다음과 같다. 1. 자동조사기에 의한 복합사 제조시험 결과 빔을 5회 주었을때 보다 빔을 주지 않았을때 사조 집합도가 향상되었으며 빔을 주지 않고 공기교란 장치만으로 섬도 감지기의 작동도 정확히 이루어져 섬도편차가 양호한 S/P 복합사를 제조할 수 있었다. 2. S/P 복합사를 SEM으로 관찰한 결과 포합이 잘된 부분이 많았으나 견사는 견사끼리 polyester는 polyester 끼리 포합된 형태도 관찰되었다. 3. 직물을 SEM으로 관찰한 chiffon 직물은 강연을 한 결과 견사 부분이 polyester사 내부로 파묻힌 곳도 관찰되었다. 4. 분산염료와 산성염료 혼합용액에서 일욕 이단법으로 염색한 S/P 복합사 직물의 염색견뢰도는 habutae 직물은 일광견뢰도가 3급인 것을 제외하고는 모두 4급 이상으로 양호하였고 chiffon 직물은 모두 4급이상으로 양호하였다. 5. habutae 직물과 chiffon 직물의 특성을 보면 강력과 modulus는 생지에서 가장 크고 염색 가공지에서 크게 감소되었으며 신도는 정련지와 염색 가공지가 생지보다 증가되었다.

• 한국기계가공학회지
• /
• 제20권10호
• /
• pp.19-26
• /
• 2021

In fine-particle injection processing, hard fine particles, such as silicon carbide or aluminum oxide, are injected - using high-pressure air, and a small amount of material is removed by applying an impact to the workpiece by spraying at high speeds. In this study, a two-axis stage device capable of sequence control was developed to spray various shapes, such as circles and squares, on the surface during the micro-particle jetting process to understand the surface-shape micro-particle-processing characteristics. In the experimental device, two stepper motors were used for the linear movement of the two degree-of-freedom mechanism. The signal output from the microcontroller is - converted into a signal with a current sufficient to drive the stepper motor. The stepper motor rotates precisely in synchronization with the pulse-signal input from the outside, eliminating the need for a separate rotation-angle sensor. The major factors of the processing conditions are fine particles (silicon carbide, aluminum oxide), injection pressure, nozzle diameter, feed rate, and number of injection cycles. They were identified using the ANOVA technique on the design of the experimental method. Based on this, the surface roughness of the spraying surface, surface depth of the spraying surface, and radius of the corner of the spraying surface were measured, and depending on the characteristics, the required spraying conditions were studied.