• Journal of ILASS-Korea
• /
• v.24 no.1
• /
• pp.35-42
• /
• 2019

Syngas is widely produced by incomplete combustion of coal, water vapor, and air (oxygen) in a high-temperature/high-pressure gasifier through a coal-gasification process for power generation. In this study, a simulation syngas which was mainly composed of $H_2$, CO, $CO_2$, and $N_2$ was fueled with diesel. A modified single cylinder compression ignition (CI) engine is equipped with intake port syngas supply system and mechanical diesel direct injection system for dual fuel combustion. Combustion and emission characteristics of the engine were investigated by applying various syngas composition ratios and compression ratios. Diesel fuel injection timing was optimized to increase indicated thermal efficiency (ITE) at the engine speed 1,800 rpm and part load net indicated mean effective pressure ($IMEP_{net}$) 2 to 5 bar. ITE of the engine increased with the $H_2$ concentration, compression ratio and engine load. With 45% of $H_2$ concentration, compression ratio 17.1 and $IMEP_{net}$ 5 bar, ITE of 41.5% was achieved, which is equivalent to that of only diesel fuel operation.

• Journal of odor and indoor environment
• /
• v.17 no.4
• /
• pp.315-321
• /
• 2018

Phthalate is an endocrine disruptor that interferes with homeostasis and developmental regulation. It is highly toxic to the environment and is associated with various diseases of the human body. Using biological samples from 140 adult subjects, to evaluate the influencing factors which are related to contaminant concentration levels, we used correlation analysis and multiple regression analysis. Lastly, in order to analyze the health effects related to exposure to phthalates, we conducted a risk assessment by estimating acceptable daily intake exposure according to the influential factors. When we compared the concentration level according to influential factors, in general, the subjects who had engaged in home remodeling work had higher urinary phthalate metabolite concentrations levels than the subjects who had not engaged in home remodeling work. We can confirm statistically significant differences in DBP metabolites. In addition, we can confirm the concentration appeared higher in the categories such as using air freshener, sofa and foods. Through conducting a risk assessment of DEHP, BBzP, DiBP, and DnBP by using data on phthalate metabolite concentration in urine, it was found that the average concentration of all metabolites did not exceed TDI.

• Journal of Animal Science and Technology
• /
• v.64 no.4
• /
• pp.782-791
• /
• 2022

The purpose of this study is to evaluate the effects of multiple cooling systems and different drinking water temperatures (DWT) on the performance of sows and their hair cortisol levels during heat stress. In this study, the effect of four different cooling systems: air conditioner (AC), cooling pad (CP), snout cooling (SC), and mist spray (MS), and two DWT, namely low water temperature (LWT) and high water temperature (HWT) on 48 multiparous sows (Landrace × Yorkshire; 242.84 ± 2.89 kg) was tested. The experiment is based on the use of eight replicas during a 21-days test. Different behaviors were recorded under different cooling treatments in sows. As a result, behaviors such as drinking, standing, and position change were found to be lower in sows under the AC and CP treatments than in those under the SC and MS treatments. Lying behavior increased under the AC and CP systems as compared with that under the SC and MS, systems. The average daily feed intake (ADFI) in sows and weight at weaning in piglets was higher under the AC, CP, and LWT treatments than under the SC, MS and HWT treatments. Sows subjected to SC and MS treatment showed higher hair cortisol levels, rectal temperature, and respiratory rate during lactation than those under AC and CP treatments. Hair cortisol levels, rectal temperature, and respiratory rate were also higher under the HWT than under the LWT treatment. As per the results of this study, the LWT has no significant effect on any of the behavioral factors. Taken together, the use of AC and CP cooling treatment is highly recommended to improve the behavior and to reduce the stress levels in lactating sows.

• Journal of Acupuncture Research
• /
• v.39 no.3
• /
• pp.202-212
• /
• 2022

Background: The aim of this study was to evaluate the effectiveness and safety of Cheong-A-Won Gagambang (JCE003) treatment for degenerative knee osteoarthritis. Methods: This was a single-center, randomized, double-blind, placebo-controlled pilot clinical trial. There were 36 adults with degenerative knee osteoarthritis who were randomly allocated into JCE003 1,000 mg, JCE003 2,000 mg, or the placebo group (in a 1:1:1 ratio). The participants received 12 weeks of treatment and had scheduled tests every 6 weeks. The primary outcomes were measured using the Korean Western Ontario and McMaster Universities scale, and the secondary outcomes were measured using the visual analog scale, European quality of life-5-dimensions, patient global impression of change, C-reactive protein, and erythrocyte sedimentation rate. Changes between baseline scores and scores following study completion were analyzed. Results: There were 29 participants whose data were analyzed in this study. The change of Korean Western Ontario and McMaster Universities, visual analog scale, European quality of life-5-dimensions scores showed significant improvement in the JCE003 1,000 mg group. The change of patient global impression of change was significantly improved in the placebo group. There were 14 adverse events, but there was no clinically significant relationship with the intake of JCE003 compared with the placebo. Conclusion: Taking JCE003 may be effective at improving knee pain in patients with degenerative knee osteoarthritis and appears to be safe. Based on this study, the concentration and feasibility of the test group may be used when conducting a large-scale clinical trial of degenerative knee osteoarthritis in the future.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.48-56
• /
• 2008

This study provides to car driver with car exhaust gas and sensor information which are car trouble code in engine and many sensors when the car has some problems. This is to provide car manager with many information of car sensors when we go to vehicle maintenance. For example, information of engine RPM, fuel system, intake air temperature, air flow sensors and oxygen sensors can provide to owner or garage, and also add to multimedia system for mp3 files and video files. This system consists of embedded linux system of low power while driving the car which uses OBD-II protocols and zigbee communication interface from CAN communication of car system to self-diagnosis embedded system of car. Finally, low power embedded system has a lot of application and OBD-II protocols for embedded linux system and CAN communication which get sensor informations of car control sensor system while driving the car.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.1
• /
• pp.31-35
• /
• 2017

The internal flow of a pump system that is installed in the interior of large vessels such as tankers is largely affected by the water level and flow conditions of the pump sump. However, the performance of the pump is generally evaluated with the consideration of only the performance of the pump itself, without considering the pumping station operating environment. Therefore, if the pump is affected by the incoming flow that exhibits vortex and swirl, the occurrence of vortex and swirl accompanied with air may cause problems with the pump sump. This effect of flow condition can lead to a decrease in efficiency, increase in vibration, and noise generation in the pump. In this study, to investigate the internal flow of the pump sump according to several water levels, a pump sump scale-model was designed and constructed. The frequency of vortex occurrence and the shape of the vortex were investigated according to the different water levels of a fundamental test. The Class C vortex type, which has a larger volume of air intake to the pump, was confirmed by the higher occurrence frequency at a relatively lower water level.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.18 no.2
• /
• pp.474-483
• /
• 2004

To know the effects between Cd inhalation toxicity and extract of Radix Achyranthis Bidentatae, 4 rat groups were exposed to Cd aerosol in air using whole-body inhalation exposure for 6 hours/day, 5 days/week, and 4 weeks. Cd concentration in air was 1.03㎎/㎥ and mass median diameter(MMD) was 1.69㎛. 3 different dose intraperitoneal injections of extract of Radix Achyranthis Bidentatae to 3 inhalation exposure groups was done for 4 weeks and the results were as follows: The highest body weight gain for 4 weeks and food intake per day were from inhalation exposure group I and the highest lung and liver weight were also from inhalation exposure group I. The highest kidney weight was from inhalation exposure group III. The lowest Cd content in lung was 33.49㎍/g from inhalation exposure group I. The lowest Cd concentration in blood was 9.36㎍/㎗ from inhalation exposure control. Cd concentrations of 40.02㎍/g in liver and 69.18㎍/g in kidney were the lowest from inhalation exposure group I and III, respectively. The lowest Cd concentration in liver was 21.08㎍/g from inhalation exposure group III and The lowest Cd concentration in kidney was 15.78㎍/g from inhalation exposure group II. For weekly Cd concentration in urine, the value of the fourth week from inhalation exposure group III was the highest. For weekly Cd concentration in feces, the value of the first week from inhalation exposure group III was the highest. The highest metallothionein concentration in lung was 53.42 ㎍/g from inhalation exposure group III and the highest metallothionein concentration in liver was 188.18㎍/g from inhalation exposure group III. The highest metallothionein concentration in kidney was 143.92㎍/g from inhalation exposure group III. The highest Hct, Hb, and WBC values were from inhalation exposure group II and the highest RBC value was from inhalation exposure group III.

• Journal of the Korean Institute of Gas
• /
• v.22 no.2
• /
• pp.78-83
• /
• 2018

The purpose of this paper is to study for failure examples of emission gas recirculation and air control and catalyzed particulate filter system in diesel engine vehicle. The first example, the researcher found the fact that the much engine oil came into the intake manifold causing diaphragm damage of EGR valve. The engine oil entered into combustion chamber of engine so that a car emit the polluted exhaust gas when driving. The second example, the researcher certified the sticking phenomenon of carbon and foreign substance with the throttle flap so that the exhaust fumes discharged exhaust port. The third example, the regeneration function don't activated to not detect the temperature of exhaust gas because of damage in the sensor. Thus, the researcher must meticulously manage his car not in order to take place the problem of environmental pollution.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.4
• /
• pp.52-60
• /
• 2015

Operation area of corps was expanded under military reformation, and extending range of 155 mm howitzer became important issue. New approach is needed to extend range to 80 kim. Ramjet engine is air breathing engine, and it can provide specific impulse several times more than solid rocket motor so that range is extended using same weight of propellant. If the ramjet engine is gun-launched system, it does not require any other booster because muzzle velocity is near Mach 3. Especially solid fuel ramjet (SFRJ) does not have any moving part so that it is favorable for gun-launching system which is under high stress during launching. In this paper, we design air intake, combustion chamber, and nozzle of 155 mm gun launched ramjet propelled artillery shell with inviscid flow assumption. We conduct parameter study to have range more than 80 km, and maximum high explosive volume.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.6
• /
• pp.1243-1252
• /
• 2002

To experiment the effects between cadmium inhalation toxicity and extracts of Folium Mori, rat inhalation exposure groups were exposed to cadmium aerosol in air by whole-body inhalation exposure for 6 hours/day, 5 days/week, and 4 weeks. Cadmium concentration in the air of cadmium aerosol was 1.02㎎/㎥ and mass median diameter(MMD) was 1.40μm. Intraperitoneal injection of extracts of Folium Mori to inhalation exposure groups was done for 4 weeks and the results were as follows: The highest body weight gain for 4 weeks and food intake per day were 126.39g/4 weeks and 19.18g/day from inhalation exposure group III, respectively. The highest lung and liver weight were 1.27g and 8.19g from inhalation exposure group II, respectively. The highest kidney weight was 1.805g from inhalation exposure control. The lowest cadmium content in lung was 86.39μg/g from inhalation exposure group III. The lowest cadmium concentration in blood was 7.12㎍/㎗ from inhalation exposure group III. Cadmium concentrations of 40.02㎍/g in liver and 69.18㎍/g in kidney were the lowest from inhalation exposure group I and III, respectively. For weekly cadmium concentration in urine, the value of the fourth week from inhalation exposure group III was the highest, 3.12㎍/㎖. For weekly cadmium concentration in feces, the value of the fourth week from inhalation exposure group III was the highest, 2.67 ㎍/g. The highest metallothionein concentration in lung was 74.65㎍/g from inhalation exposure group III and the highest metallothionein concentration in liver was 386.84㎍/g from inhalation exposure group II. The highest metallothionein concentration in kidney was 236.17 ㎍/g from inhalation exposure group II.