• 제목/요약/키워드: Air Cavity

검색결과 502건 처리시간 0.018초

접착강화제 도포후 인공타액에 오염된 표면의 처리방법에 따른 복합레진의 번연누출과 전단결합강도 (MARGINAL MICROLEAKAGE AND SHEAR BOND STRENGTH OF COMPOSITE RESIN ACCORDING TO TREATMENT METHODS OF ARTIFICIAL SALIVA-CONTAMINATED SURFACE AFTER PRIMING)

  • 조영곤;고기종;이석종
    • Restorative Dentistry and Endodontics
    • /
    • 제25권1호
    • /
    • pp.46-55
    • /
    • 2000
  • During bonding procedure of composite resin, the prepared cavity can be contaminated by saliva. In this study, marginal microleakage and shear bond strength of a composite resin to primed enamel and dentin treated with artificial saliva(Taliva$^{(R)}$) were evaluated. For the marginal microleakage test, Class V cavities were prepared in the buccal surfaces of fifty molars. The samples were randomly assigned into 5 groups with 10 samples in each group. Control group was applied with a bonding system (Scotchbond$^{TM}$ Multi-Purpose plus) according to manufacture's directions without saliva contamination. Experimental groups were divided into 4 groups and contaminated with artificial saliva for 30 seconds after priming: Experimental 1 group ; artificial saliva was dried with compressed air only, Experimental 2 group ; artificial saliva was rinsed and dried. Experimental 3 group ; cavities were etched with 35% phosphoric acid for 15 seconds after rinsing and drying artificial saliva. Experimental 4 group ; cavities were etched with 35% phosphoric acid for 15 seconds and primer was reapplied after rinsing and drying artificial saliva. All the cavities were applied a bonding agent and filled with a composite resin (Z-100$^{TM}$). Specimens were immersed in 0.5% basic fuschin dye for 24 hours and embedded in transparent acrylic resin and sectioned buccolingually with diamond wheel saw. Four sections were obtained from one specimen. Degree of marginal leakage was scored under stereomicroscope and their scores were averaged from four sections. The data were analyzed by Kruscal-Wallis test and Fisher's LSD. For the shear bond strength test, the buccal or occlusal surfaces of one hundred molar teeth were ground to expose enamel(n=50) or dentin(n=50) using diamond wheel saw and its surface was smoothed with Lapping and Polishing Machine(South Bay Technology Co., U.S.A.). Samples were divided into 5 groups. Treatment of saliva-contaminated enamel and dentin surfaces was same as the marginal microleakage test and composite resin was bonded via a gelatin capsule. All specimens were stored in distilled water for 48 hours. The shear bond strengths were measured by universal testing machine (AGS-1000 4D, Shimaduzu Co., Japan) with a crosshead speed of 5 mm/minute. Failure mode of fracture sites was examined under stereomicroscope. The data were analyzed by ANOVA and Tukey's studentized range test. The results of this study were as follows : 1. Enamel marginal microleakage showed no significant difference among groups. 2. Dentinal marginal microleakages of control, experimental 2 and 4 groups were lower than those of experimental 1 and 3 groups (p<0.05). 3. The shear bond strength to enamel was the highest value in control group (20.03${\pm}$4.47MPa) and the lowest value in experimental 1 group (13.28${\pm}$6.52MPa). There were significant differences between experimental 1 group and other groups (p<0.05). 4. The shear bond strength to dentin was higher in control group (17.87${\pm}$4.02MPa) and experimental 4 group (16.38${\pm}$3.23MPa) than in other groups, its value was low in experimental 1 group (3.95${\pm}$2.51 MPa) and experimental 2 group (6.72${\pm}$2.26MPa)(p<0.05). 5. Failure mode of fractured site on the enamel showed mostly adhesive failures in experimental 1 and 3 groups. 6. Failure mode of fractured site on the dentin did not show adhesive failures in control group, but showed mostly adhesive failure in experimental groups. As a summary of above results, if the primed tooth surface was contaminated with artificial saliva, primer should be reapplied after re-etching it.

  • PDF

고립성 폐결절에 대한 진단적 접근 : 악성결절과 양성결절의 감별 지표에 대한 재검토 (Diagnostic Approach to the Solitary Pulmonary Nodule : Reappraisal of the Traditional Clinical Parameters for Differentiating Malignant Nodule from Benign Nodule)

  • 고원중;김철현;장승훈;이재호;유철규;정희순;김영환;한성구;심영수
    • Tuberculosis and Respiratory Diseases
    • /
    • 제43권4호
    • /
    • pp.500-518
    • /
    • 1996
  • 연구배경 : 고립성 폐결절에서 연령, 흡연력, 과거 암 발생력 등의 임상적 특징과 크기, 석회화, 성장속도, 전산화단층촬영 소견 등의 방사선학적 특징이 악성결절과 양성결절의 감별점으로 제시되고 있다. 하지만 알려진 대부분의 감별점은 전산화단층촬영이 광범위하게 보급되기 이전의 자료 그리고 폐암이 현재와 같이 높은 발생률을 보이기 이전의 자료를 토대로 한 것이다. 또한 이를 토대로 한 진단적 접근이 결핵종이 상대적으로 많은 국내에서도 마찬가지로 적용될 수 있을 지에 대해서는 잘 알려져 있지 않다. 악성결절과 양성결절의 감별점으로 제시되는 여러 임상적, 방사선학적 특징과 경피적 흡인세침검사, 외과적 절제술 등 여러 진단방법의 임상적 의의를 재평가하고자 하였다. 방법 : 1994년 1월부터 1995년 2월까지 서울대학교병원에 입원한 고립성 폐결절 환자 113명중 결절의 원인이 확인된 94명을 대상으로 후향적 연구를 시행하였다. 결과 : (1) 113례중 94례에서 원인질환이 확인되었다. 악성결절이 60례였고 이중 기관지암종이 49례였으며 선암이 30례로 기관지암종의 대부분을 차지하였다. (2) 악성결절을 가진 환자의 평균연령($58.1{\pm}10.0$세)이 양성결절을 가진 환자($49.7{\pm}12.0$세)에 비해 높았으며(p=0.0004), 연령증가에 따라 악성결절이 차지하는 비율이 직선적으로 증가하였다. (3) 흡연력은 양성결절을 가진 환자($13.0{\pm}17.6$갑년)과 악성결절을 가진 환자($18.5{\pm}25.1$갑년)에서 유의한 차이가 없었다(p=0.2108). (4) 과거력상 암발생력이 있었던 10례중 9례가 악성결절이었으며, 이중 5례는 이전의 암과는 무관하게 새로이 발생한 원발성 폐암이었다. (5)결절의 평균크기는 양성결절($3.01{\pm}1.20cm$)과 악성결절($2.98{\pm}0.97cm$)에서 유의한 차이가 없었다(p=0.8937). (6) 용적배가시간을 구할 수 있었던 22례중 용적배가시간이 400일이상인 결절 9례중 악성결절이 6례였다. (7) 흉부 전산화단층촬영상 분엽성 또는 침상형 변연, 공기기관지음영, 결절과 흉막사이의 선상음영, 림프절 증대 등을 보이는 경우 악성결절을 보다 더 시사할 수 있었다. 결절 내부의 석회화, 내부 저음영, 결절내부 공동의 벽두께가 균일한 경우, 경계가 잘 지어진 변연, 결절주위 폐실질의 위성병소 등은 양성결절을 시사할 수 있었다. (8) 경피적 흡인세침검사를 통하여 양성결절의 57.6%(19/33)와 악성결절의 81.0%(47/58)를 진단하였다. 양성결절 2례와 악성결절 1례에서 풍요한 진단적 뒤바뀜이 있었다. (9) 수술전 진단이 되지 않은 상태에서 외과적 절제술을 시행한 26례중 11례(42.3%)가 악성결절이었다. 외과적 절제술을 시행한 전체 61례중 악성결절은 46례(75.4%)였다. 결론: 연령이 높을수록, 과거력상 암발생력이 있는 경우, 흉부전산화단층촬영상 분엽성 또는 침상형 변인, 공기기관지음영, 결절과 흉막사이의 선상음영, 림프절 증대 등을 보이는 경우 악성결절을 보다 더 시사할 수 있을 것으로 보인다. 하지만 현재까지 고립성 폐결절에서 악성결절과 양성결절을 감별할 수 있는 지표로 여겨졌던 흡연여부나 흡연량, 결절의 크기, 용적배가시간 등은 악성결절과 양성결절의 감별에 도움이 되지 않았다. 국내에서도 원발성 폐암의 빈도가 급속히 증가하고 있는 현실을 고려할 때 원발성 폐암의 치유 가능한 병기를 반영하는 고립성 폐결절이 발견된 환자에서 외과적 절제술을 포함한 보다 적극적인 진단적 접근이 필요할 것으로 보인다.

  • PDF