• Journal of the Ergonomics Society of Korea
• /
• v.24 no.3
• /
• pp.1-10
• /
• 2005

The primary objective of this study is to design input methods for assisting button selection tasks on a PDA screen. Familiar methods in the existing computing environments were investigated to develop aiding methods. Factors manipulated in the experiment included aiding method, button size, and users' prior experience with PDAs. A total of sixteen participants examined the usability of button selection tasks. Two types of button selection tasks were used as experimental tasks; one was selecting a target button, and the other was selecting multiple target buttons consecutively. The results showed that the aiding method and the button size had significant effects on the subjective satisfaction as well as the performance. In addition, users' prior experience with PDAs affected the performance significantly. The interaction between the aiding method and the button size was found to have significant effects on the performance. However, the interaction effect between the button size and the PDA experience was significant on the task performance time only for the multiple button selection tasks. Design considerations were proposed based on the experimental results. These can be applied to the PDA interaction design to make the PDAs more usable.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.3
• /
• pp.155-163
• /
• 2018

This study examined methods to enhance navigation performance and reduce the divergence of navigation solutions that may occur in the event of global positioning system (GPS) failure by integrating the GPS/inertial navigation system (INS) with the three-dimensional (3D) magnetic vector measurements of a magnetometer. A magnetic heading aiding method that employs a magnetometer has been widely used to enhance the heading performance in low-cost GPS/INS navigation systems with insufficient observability. However, in the case of GPS failure, wrong heading information may further accelerate the divergence of the navigation solution. In this study, a method of integrating the 3D magnetic vector measurements of a magnetometer is proposed as a countermeasure for the case where the GPS fails. As the proposed method does not require attitude information for integration unlike the existing magnetic heading aiding method, it is applicable even in case of GPS failure. In addition, the existing magnetic heading aiding method utilizes only one-dimensional information in the heading direction, whereas the proposed method uses the two-dimensional attitude information of the magnetic vector, thus improving the observability of the system. To confirm the effect of the proposed method, simulation was performed for the normal operation and failure situation of GPS. The result confirmed that the proposed method improved the accuracy of the navigation solution and reduced the divergence speed of the navigation solution in the case of GPS failure, as compared with that of the existing method.

• CELLMED
• /
• v.13 no.7
• /
• pp.27.1-27.4
• /
• 2023

Objective: To report a case of improvement in atrophic gastritis using cell correction nutritional therapy. Methods: A 67-year-old Korean female with impaired digestive function and symptoms of abdominal bloating and hypochlorhydria. Results: Following the application of nutritional therapy, the severity of symptoms was alleviated, ultimately resulting in a complete resolution of atrophic gastritis. Conclusion: Nutritional therapy may be beneficial in alleviating symptoms and aiding in the treatment of patients presenting with atrophic gastritis symptoms.

• Journal of Audiology & Otology
• /
• v.24 no.1
• /
• pp.17-23
• /
• 2020

Background and Objectives: We aimed to measure the head dimensions on computed tomography (CT) images, to compare them to directly measured head dimensions, and to predict a new parameter of bone thickness for aiding bone conduction implant (BCI) placement. Subjects and Methods: We reviewed the facial and mandibular bone CT images of 406 patients. Their head sizes were analyzed using five parameters included in the 6th Size Korea project, and they were divided into age groups (ranging from the 10s to the 80s). We compared the head length, head width, sagittal arc, bitragion arc, and head circumference in the CT and Size Korea groups. We also added the parameter bone thickness for aiding BCI placement. Results: All the head size parameters measured using CT were significantly smaller than those measured directly, with head length showing the smallest difference at 7.85 mm. The differences in the other four parameters between the two groups according to patient age were not statistically significantly different. Bone thickness had the highest value of 4.89±0.93 mm in the 70s and the lowest value of 4.10±0.99 mm in the 10s. Bone thickness also significantly correlated with head width (p=0.038). Conclusions: Our findings suggested that the CT and direct measurements yielded consistent data. Moreover, CT enabled the measurement of bone sizes, including bone thickness, that are impossible to measure directly. CT measurements may complement direct measurements in the Size Korea data when used for developing bone conduction hearing devices (BCIs and headsets) for the Korean population.

• Korean Journal of Audiology
• /
• v.24 no.1
• /
• pp.17-23
• /
• 2020

Background and Objectives: We aimed to measure the head dimensions on computed tomography (CT) images, to compare them to directly measured head dimensions, and to predict a new parameter of bone thickness for aiding bone conduction implant (BCI) placement. Subjects and Methods: We reviewed the facial and mandibular bone CT images of 406 patients. Their head sizes were analyzed using five parameters included in the 6th Size Korea project, and they were divided into age groups (ranging from the 10s to the 80s). We compared the head length, head width, sagittal arc, bitragion arc, and head circumference in the CT and Size Korea groups. We also added the parameter bone thickness for aiding BCI placement. Results: All the head size parameters measured using CT were significantly smaller than those measured directly, with head length showing the smallest difference at 7.85 mm. The differences in the other four parameters between the two groups according to patient age were not statistically significantly different. Bone thickness had the highest value of 4.89±0.93 mm in the 70s and the lowest value of 4.10±0.99 mm in the 10s. Bone thickness also significantly correlated with head width (p=0.038). Conclusions: Our findings suggested that the CT and direct measurements yielded consistent data. Moreover, CT enabled the measurement of bone sizes, including bone thickness, that are impossible to measure directly. CT measurements may complement direct measurements in the Size Korea data when used for developing bone conduction hearing devices (BCIs and headsets) for the Korean population.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.35 no.1
• /
• pp.57-65
• /
• 2024

Autism spectrum disorder (ASD) can be associated with eating problems. However, currently, there is a lack of established guidelines for assessing and addressing eating behaviors in individuals with ASD. This gap in research exists due to the challenges associated with using traditional assessment methods, which may lead to discrepancies in responses and unintentional potential biases from caregivers. In this review, we provided a comprehensive overview of various eating behaviors commonly observed in individuals with ASD. These behaviors include 1) food neophobia, 2) selective eating, 3) binge eating, 4) food avoidance, 5) chewing and swallowing problems, 6) pica, 7) rumination, 8) rituals, and 9) problematic behaviors. Furthermore, we provide a perspective of utilizing digital tools: 1) augmentative and alternative communication; 2) ecological momentary assessment; and 3) video analysis, behavioral analysis, and facial expression analysis. This review explores existing assessment methods and suggests novel assessment aiding together.

• Journal of Photoscience
• /
• v.10 no.1
• /
• pp.165-173
• /
• 2003

m-Phenylene-linked biscarbenes, bisnitrenes and carbenonitrenes can be formed photochemically from appropriate nitrogenous precursors. Generation of such reactive intermediates under matrix-isolation conditions allows for their characterization by spectroscopic techniques such as ESR, UV /vis and IR. The latter method is also useful in characterizing secondary products derived from these reactive intermediates. Computational chemistry methods complement experimental IR data, aiding, thus, in identification of such compounds. In addition electronic structure calculations help in developing qualitative and semi-quantitative models, which can be useful in predicting ground-state multiplicities. The parent systems of m-phenylene-linked carbenes and nitrenes have high-spin ground states, but a switching to lower multiplicity can be achieved by chemical substitution. The ground state and various low-lying excited states of m-phenylenecarbenonitrenes can be reasonably approximated by simple valence-bond depictions. Finally, m-phenylenecarbenonitrenes are photoreactive in the inert matrix isomerizing to cyclopropene derivatives.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.9
• /
• pp.947-953
• /
• 2011

Radome aberration error causes degradation of miss distance as well as stability of high maneuver missile system with RF seeker. A study about radome compensation method is important in this kind of missile system design. Several kinds of methods showed good compensation performance in their paper. Proposed adaptive Particle filter estimates line of sight rate excluding the radome induced error. This paper shows effectiveness of adaptive Particle filter as compensation method of radome aberration error. Robust performance of this filter depends on external aiding measurement, target acceleration. Tuning of system error covariance can make this filter unsensitive against the error of target acceleration information. This paper demonstrates practical usage of adaptive Particle filter for reducing miss distance and increasing stability against disturbance of radome aberration error through performance analysis.

• Asia pacific journal of information systems
• /
• v.9 no.3
• /
• pp.75-92
• /
• 1999

Executive information systems (EIS) developers are faced with an increasingly difficult choice problem in the evaluation and selection of software packages. For many reasons, they frequently must depend on identification and evaluation of features of packages. When EIS software evaluation is regarded as an unstructured or semi-structured group decision making problem, the most appropriate decision-aiding methods are needed to help effective group interaction. This paper examines evaluation criteria of full-featured EIS packages and considers the priority of these criteria using the Analytic Hierarchy Process (AHP). Two exploratory phases are presented. In the first phase, an approach combining the AHP with the linear weighted attribute method is presented to computer qualities of some packages. In the second phase, the decision making group includes EIS developers, users, and vendors to prioritize evaluation criteria.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.585-589
• /
• 2018

Consumer demand for high quality image/video services led to growing trend in image quality enhancement study. Therefore, recent years was a period of substantial progress in this research field. Through careful observation of the image quality after processing by image enhancement algorithms, we perceived that the dark region in the image usually suffered loss of contrast to a certain extent. In this paper, the low-light stretch preprocessing algorithm is, hence, proposed to resolve the aforementioned issue. The proposed approach is evaluated qualitatively and quantitatively against the well-known histogram equalization and Photoshop curve adjustment. The evaluation results validate the efficiency and superiority of the low-light stretch over the benchmarking methods. In addition, we also propose the 255MHz-capable hardware implementation to ease the process of incorporating low-light stretch into real-time imaging systems, such as aerial surveillance and monitoring with drones and driving aiding systems.