• Wind and Structures
• /
• 제17권5호
• /
• pp.515-535
• /
• 2013

The present study aims to investigate characteristics of the flow structures around the Ahmed body by using both experimental and numerical methods. Therefore, 1/4 scale Ahmed body having $25^{\circ}$ slant angle was employed. The Reynolds number based on the body height, H and the free stream velocity, U was $Re_H=1.48{\times}10^4$. Investigations were conducted in two parts. In the first part of the study, Large Eddy Simulation (LES) method was used to resolve the flow structures around the Ahmed body, numerically. In the second part of the study the particle image velocimetry (PIV) technique was used to measure instantaneous velocity fields around the Ahmed body. Time-averaged and instantaneous velocity vectors maps, streamline topology and vorticity contours of the flow fields were presented and discussed in details. Comparison of the mean and turbulent quantities of the LES results and the PIV results with the results of Lienhart et al. (2000) at different locations over the slanted surface and in the wake region of the Ahmed body were also given. Flow features such as critical points and recirculation zones in the wake region downstream of the Ahmed body were well captured. The spectra of numerically and experimentally obtained stream-wise and vertical velocity fluctuations were presented and they show good consistency with the numerical result of Minguez et al. (2008).

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.559-562
• /
• 2015

본 연구에서는 EDISON_CFD를 활용하여 승용차 모델을 단순화한 Ahmed Body의 후미 경사각 Slant angle $0^{\circ}$, $15^{\circ}$, $30^{\circ}$, $45^{\circ}$의 항력계수변화를 확인하였다. 결과 분석을 통해 Ahmed Body 후면의 후류와 항력계수의 변화 경향성이 같다는 것을 확인하였다. 항력계수는 자동차의 연비 및 최고속도 등 동력성능에 큰 영향을 미치므로 최저 항력계수를 찾아보았다. 각각의 경우에 EDISON_simulation 결과 값을 비교해보면 $15^{\circ}{\sim}30^{\circ}$ 사이에서 최저 항력계수를 갖는 것을 확인할 수 있었다. 정확한 값을 찾기 위해 Polynomial Curve Fitting을 사용하여 Slant angle 이 $22.91^{\circ}$일 때 최저항력계수 0.1375를 갖는 것을 확인하였다.

• 대한기계학회논문집B
• /
• 제21권7호
• /
• pp.873-881
• /
• 1997

A numerical simulation has been carried out for three-dimensional turbulent flows around an Ahmed body. The Reynolds-averaged Navier-Stokes equation is solved with the SIMPLE method in general curvilinear coordinates system. Several k-.epsilon. turbulence models with two convective difference schemes are evaluated for the performance such as drag coefficient, velocity and pressure fields. The drag coefficient, the velocity and pressure fields are found to be changed considerably with the adopted k-.epsilon. turbulence models as well as the finite difference schemes. The results of simulation prove that the RNG k-.epsilon. model with the QUICK scheme predicts fairly well the tendency of velocity and pressure fields and gives more reliable drag coefficient. It is also demonstrated that the large difference between simulations and experiment in the drag coefficient is due to relatively high predicted values of pressure drag from vertical rear end base.

• 대한기계학회논문집B
• /
• 제20권11호
• /
• pp.3589-3597
• /
• 1996

The Reynolds-averaged Navier-Stokes equations with the equations of the k-.epsilon. turbulence model are solved numerically in a general curvilinear system for a three-dimensional turbulent flow around an Ahmed body. The simulation is especially aimed at the evaluation of three finite differencing schemes for the convection term, which include the upwind differencing scheme(UDS), the second order upwind differencing scheme(SOU scheme) and the QUICK scheme. The drag coefficient, the velocity and pressure fields are found to be changed considerably with the adopted finite differencing schemes. It is clearly demonstrated that the large difference between computation and experiment in the drag coefficient is due to relatively high predicted values of pressure drag from both front part and vertical rear end base. The results also show that the simulation with the QUICK or SOU scheme predicts fairly well the flow field and gives more accurate drag coefficient than other finite differencing scheme.

• 한국전산유체공학회지
• /
• 제2권1호
• /
• pp.46-53
• /
• 1997

The flow field around a three dimensional minivan-like body has been simulated. This study solves 3-D unsteady incompressible Navier-Stokes equations on a non-orthogonal curvilinear coordinate system using second-order accurate schemes for the time derivatives, and third/second-order scheme for the spatial derivatives. The Marker-and-Cell concept is applied to efficiently solve continuity equation. A H-H type of multi-block grid system is generated around a three dimensional minivan-like body. Turbulent flows have been modeled by the Baldwin-Lomax turbulent model. To validate present procedure, the flows around the Ahmed body with 12.5° of slant angle are simulated. A good agreement with other numerical results is achived. After code validation, the flows around a mimivan-like body are simulated. The simulation shows three dimensional vortex-pair just behind body. The flow separation is also observed on the rear of the body. It has concluded that the results of present study properly agreed with physical flow phenomena.

• 한국전산유체공학회지
• /
• 제3권2호
• /
• pp.39-51
• /
• 1998

This paper describes the analysis of flow field around an automobile. The governing equations of the 3-D unsteady incompressible Navier-Stokes equations are solved by the iterative time marching scheme. The Chimera grid technique has been applied to efficiently simulate the flow around the side-view mirror. To validate the capability of simulating the flow around a ground vehicle, the flows around the Ahmed body with 12.5$^{\circ}$ and 30$^{\circ}$ of slant angles are simulated and good agreements with experiment and other numerical results are achieved. To validate Chimera grid technique, the flow field around a cylinder was also calculated. The computed results are also well agreed with other numerical results and experiment. After code validations, the flow phenomena around the ground vehicle are evidently shown. The flow around the side-view mirror is also well simulated using the Chimera grid technique.

• Advances in Traditional Medicine
• /
• 제6권4호
• /
• pp.344-348
• /
• 2006

The crude methanolic extract of the bark of Cerbera odollam Gaertn. was evaluated for its possible antinociceptive and neuropharmacological activities in animal models. At the dose of 250 and 500 mg/kg body weight, the extract showed a significant antinociceptive effect in acetic acid induced writhing in mice comparable to that produced by aspirin, used as standard drug (P<0.001). The extract significantly reduced the time of onset of sleep (P<0.01) and potentiated the pentobarbital induced sleeping time in mice at the dose of 400 mg/kg of body weight significantly (P<0.001). It also decreased the open field score in open field test significantly at the dose of 400 mg/kg of body weight (P < 0.05). The obtained results tend to suggest the probable antinociceptive and neuropharmacological activities of the crude extract.

• 한국임상수의학회지
• /
• 제25권5호
• /
• pp.385-390
• /
• 2008

The purpose of this study was to compare the long term prognosis of Ahmed valve implantation and medical therapy in dogs with early primary glaucoma. The medical records of dogs with early primary glaucoma from the Veterinary Medical Teaching Hospital of Seoul National University between January 2005 and May 2008 were reviewed. Five dogs underwent Ahmed valve implantation and medical therapy was performed in six dogs. Breeds of the dogs included Shih Tzu(n = 7), American cocker spaniel(n = 2), and miniature poodle(n = 2). Adequate intraocular pressure(IOP) was better maintained in the Ahmed valve implantation group than in the medical treatment group throughout the follow-up period. Mean time for vision loss to develop after treatment in the Ahmed valve implantation group($198.0{\pm}115.4$ days) was significantly longer than that in medical treatment group($43.2{\pm}30.4$ days, p < 0.05). Post-operative complications included occlusion of the tube by fibrin in the anterior chamber (n = 1), fibrous capsule about the episcleral base of the device(n = 1), and dislocation of the valve body(n = 1). It is considered that Ahmed valve implantation is more effective strategy to control IOP and maintain vision than medical treatment in early glaucomatous dogs.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.405-413
• /
• 1994

This paper presents the experimental results of aerodynamic drags of model cars. The effects of cooling air on total drag were introduced by using momentum theorem. Vehicle-liked Ahmed body and 1/5 model car were used to evaluate the increments of drags due to the internal flow. The results were compared with momentum theorem and other's experiments and showed good agreements. In the case of Ahmed body, drags were increased by 22% due to the internal flow and decreased linealy by reducing internal air flow rates and inlet areas. The experiments on 1/5 model car with ill-defined air flow passage showed 10% increment of drag. The results of present study showed that cooling drag could be predicted by momentum theorem within small errors.

• EDISON SW 활용 경진대회 논문집
• /
• 제3회(2014년)
• /
• pp.591-596
• /
• 2014

본 논문에서는 EDISON_전산열유체 시스템을 활용하여 군집주행 형태 변화에 따른 항력계수 및 연료효율 변화를 분석하였다. 해석 대상은 자동차 형상을 단순화한 모델인 아흐메드 형상(Ahmed body)을 이용하였다. 동종차량 간 거리변화에 따른 항력계수 및 연료효율의 변화, 이종차량의 배열순서변화에 따른 항력계수 및 연료효율을 분석하며 연구를 수행하였다. 연구 결과, 4대의 동종차량 군집주행시 항력계수를 최대 69% 감소할 수 있으며 이에 따라 km 당 0.073L의 연료를 절감할 수 있다.