• Journal of Korean Society on Water Environment
• /
• v.24 no.6
• /
• pp.806-816
• /
• 2008

In recent years, increases in impervious areas with rapid urbanization and land use changes are causing numerous hydrologic and environmental problems. In this study Low Impact Development (LID) was applied to investigate changes in runoff and peak runoff with LID plans. SWMM 5.0 was used to simulate LID Integrated Management Practices (IMPs) at study area. The SWMM estimated total runoff volume with conventional land use planning is (82.3%, 46.44 mm), (99%, 73.16 mm) greater than total runoff before urbanization, while total runoff with LID is (11.1%, 46.44 mm), (49%, 73.16 mm) greater than those before urbanization. With the LID adoption in land use planning, pervious area increases by 49.8% compared with that from the conventional urban land use planning, resulting in (32.7%, 46.44 mm), (23.6%, 73.16 mm) decrease in total runoff, and (32.6%, 46.44 mm), (18.5%, 73.16 mm) decreases in peak rate runoff. The results obtained from this study indicate that peak rate runoff, time to peak, and total runoff can be reduced with the LID in urban land use planning because the LID secures pervious areas with various LID IMPs. The SWMM simulated result using design storm data and the US EPA suggested CN values for various LID IMPs implies that how environment-friendly urban land use planning with the LID adoption is important for sustainable development at urbanizing watershed.

• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.897-905
• /
• 2007

Approximately 70% of Korea is composed of forest areas. Especially 48% of agricultural field is practiced at highland areas over 400 m in elevation in Kangwon province. Over 90% of highland agricultural farming is located at Kangwon province. Runoff characteristics at the mountainous area such as Kangwon province are largely affected by steep slopes, thus runoff estimation considering field slopes needs to be utilized for accurate estimation of direct runoff. Although many methods for runoff estimation are available, the Soil Conservation Service (SCS), now Natural Resource Conservation Service (NRCS), Curve Number (CN)-based method is used in this study. The CN values were obtained from many plot-years dataset obtained from mid-west areas of the United States, where most of the areas have less than 5% in slopes. Thus, the CN method is not suitable for accurate runoff estimation where significant areas are over 5% in slopes. Therefore, the CN values were adjusted based on the average slopes (25.8% at Doam-dam watershed) depending on the 5-day Antecedent Moisture Condition (AMC). In this study, the CN-based Long-Term Hydrologic Impact Assessment (L-THIA) direct runoff estimation model used and the Web-based Hydrograph Analysis Tool (WHAT) was used for direct runoff separation from the stream flow data. The $R^2$ value was 0.65 and the Nash-Sutcliffe coefficient value was 0.60 when no slope adjustment was made in CN method. However, the $R^2$ value was 0.69 and the Nash-Sutcliffe value was 0.69 with slope adjustment. As shown in this study, it is strongly recommended the slope adjustment in the CN direct runoff estimation should be made for accurate direct runoff prediction using the CN-based L-THIA model when applied to steep mountainous areas.

• Journal of Korean Society on Water Environment
• /
• v.23 no.4
• /
• pp.518-526
• /
• 2007

There have been serious soil erosion and water pollution problems caused by highland agriculture practices at Doam-dam watershed. Especially agricultural activities, chemical and organic fertilizer and pesticide applications, soil reconditioning to maintain soil fertility are known as primary causes of soil erosion and water qaulity degradation in the receiving water bodies. Among these, soil reconditioning can accelerate soil erosion rates. To develop soil erosion prevention practices, it is necessary to estimate the soil erosion from the watershed. Thus, the Universal Soil Loss Equation (USLE) model has been developed and utilized to assess soil erosion. However, the USLE model cannot be used at watershed scale because it does not consider sediment delivery ratio (SDR) for watershed application. For this reason, the Sediment Assessment Tool for Effective Erosion Control (SA TEEC) was developed to assess the sediment yield at any point in the watershed. The USLE-based SA TEEC system can estimate the SDR using area-based SDR and slope-based SDR module. In this study, the SATEEC system was used to estimate soil erosion and sediment yield at the Doam-dam watershed using the soil properties from reconditioned agricultural fields. Based on the soil sampling and analysis, the US LE K factor was calculated and used in the SA TEEC system to analyze the possible errors of previous USLE application studies using soil properties from the digital soil map, and compared with that using soil properties obtained in this study. The estimated soil erosion at the Doam-dam watershed without using soil properties obtained in the soil sampling and analysis is 1,791,400 ton/year (123 ton/ha/year), while the soil erosion amount is 2,429,900 ton/year (166.8 ton/ha/year) with the use of soil properties from the soil sampling and analysis. There is 35 % increase in estimated soil erosion and sediment yield with the use of soil properties from soil reconditioned agricultural fields. Since significant amount of soil erosion are known to be occurring from the agricultural fields, the soil erosion and sediment yield from only agricultural fields was assessed. The soil erosion rate is 45.9 ton/ha/year without considering soil properties from soil reconditioned agricultural fields, while 105.3 ton/ha/year after considering soil properties obtained in this study, increased in 129%. This study shows that it is very important to use correct soil properties to assess soil erosion and sediment yield simulation. It is recommended that further studies are needed to develop environment friendly soil reconditioning method should be developed and implemented to decrease the speed of soil erosion rates and water quality degradation.

• Korean Journal of Agricultural Science
• /
• v.22 no.1
• /
• pp.11-23
• /
• 1995

The CAD/CAM system for the manufacturing automation is the newest technology in mechanical engineering area and becomes the important research subject nowadays. Most of all hardwares and softwares for the CAD/CAM system used in the our manufacturing companies such as automobile company are developed by the foreign country and the purchasing price of them is very expensive but their applicability to a certain area is very limited. This study was conducted to develope a CAD/CAM system for the design and the automatic manufacturing of the iron pattern shaped with 3 - dimensional free curved surface, and to test its applicability to the design and the manufacturing of the rotary blade. The results obtained from the study are as follow; 1. The CAD system which can process graphic procedures from the free curved surface shaped data was developed with personal computer. 2. The CAM main program was developed. This main program could produce CL data from CAD data file by checking the tool interference according to the cutting mode. 3. The sub. program which can simulate the tool trace from the CL data was developed. 4. The post processor for the Deckel FP2NC NC milling machine from CL data file was developed and the sub program could transmit NC program through modem to NC milling machine was developed. 5. The developed CAM system seemed to be applicable to any other system. Because the measuring results of the cross sectional thickness of the plastic model from the manufacturing iron pattern by the system showed that this system could properly check the tool interference. 6. In took 75~90 hours to manufacture two iron patterns of rotary blade. For the sake of convenience in applying to the other systems, this system was developed in BASIC and FORTRAN computer language and minimum portion of machine language as possible.

• Journal of the Korean Institute of Rural Architecture
• /
• v.8 no.3
• /
• pp.67-74
• /
• 2006

The purpose of this paper is to find out and discuss methods of development applicable in rural agricultural area. It is expected that rural economy will decrease in the future because of the structural problems of agricultural economy itself. The demands of rural communities for an improvement in the living standards should continue to increase but the present living environments remain poor and are at a relatively low level. This investigation focuses on the analysis of development types in rural areas in Japan. Various methods of development must be used considering specific features of each rural village. The village people's participation must be needed for success of certain methods of development. An example is the type of greentourism and type of exchange between the urban and the rural areas. Other types of development require enormous expense for construction of facilities. Various strategies and methods of development are needed in rural agricutural area in Korea. The simple method of development that is widely used currently is not really helpful to the development of rural agricultural economy.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.E
• /
• pp.33-46
• /
• 1990

Abstract Over 700/0 of the rural land area in Korea is mountainous and small watersheds provide most of the water resources for agricutural use. To provide an appropriate tool for the agricultural water resource development project, SNUA2, a mathematical model for simulating the physical processes governing the precipitation-runoff relationships and predicting the storm and long-term runoff quantities from the small mountainous watersheds was developed. The hydrological characteristics of small mountainous watersheds were reviewed to select appropriate theories for the simulation of the runoff processes, and a deterministic and distributed model was developed. In this, subsurface flows are routed by solving Richard's two dimensional equation, the dynamics of soil moisture contents are simulated by the consideration of phenological factors of canopy plants and surface flows are routed by solving the kinematic wave theory by numerical analysis. As a result of an application test of the model to the Sanglim watershed, peak flow rates of storm runoff were over-estimated by up to 184.2%. The occurence time of peak flow and total runoff volume of storm runoffs simulated were consistent with observed values and the annual runoff volumes were simulated in the error range of less than 5.8%.

• KCID journal
• /
• v.18 no.2
• /
• pp.43-53
• /
• 2011

In this study, the internal development of the Saemangeum basic concept of the changes being promoted as a lead construction and agricultural land works(54.2 km) has established a numerical model for the scenario. Inner dike to the construction site to reflect the following conditions to reproduce the numerical model by each areas during construction inner dike where scour expected to perform a numerical analysis for the hydraulic review by areas with possible future changes were to predict. Simulation results showed that numerical simulation results for scour expected frequency of 100 years in flood conditions is simulated with 0.02 m/s~l.27 m/s scour velocity for high-impact factor is considered to be stable. Each start point and end point work area of inner dike reviewed and flow rate of 100 years flood, the velocity distribution in the influx of a large flow rate of 0.02 m/s~1.68 m/s occur during construction inner dike are not being evaluated as a special issue does not occur will be considered according to the method and order of construction inner dike stability review suggests that the future need to be made.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.155-161
• /
• 1999

The land reclamation area of Saemangeum(Kunsan) is located between 126$^{\circ}$10' E~126$^{\circ}$50' E and 35$^{\circ}$35' N~356$^{\circ}$05'N at the western coast of the Korean peninsula. The are many small islands including extensive areas of semi-diurnally flooded and dewatered tidal flats. The reclamation area of Saemangeum has a range of 5.6m spring tide and the maximum tidal current speed is about 1.41m s-1 in ordinary spring tide. Most of the sediments deposited on the tidal flats are transported from the Geum river, the Manjyung river and The Dongjin river. The soil in this area consists of silty sand with the depth of 10m to 30m . The wind in winter is strong from the direction of northwest. In the past twenty years, land reclamation projects for agricutural purpose or industrial cocmplex have been mostly implemented along the western coast of Korea. Saemangeum coastal area is being constructed the33km sea dike and 40, 100ha reclamation area. The purpose of this study is to find the residual circulations in four seasons after the dike construction by a robust diagnostic and prognostic numerical model. Heat flux at the sea surface in January ,May , August , October was asopted on the basis on the daily inflow of solar radiation at the earth surface, assuming an average atomospheric transmission and no clouds , as a function of latitude and time of year(George L.P.J.E William, 1990). The discharge from the Geum , the Mankyung and the Dongjin rivers was adopted on the basis of experience formula of river flow in January , May ,August, October (The M. of C.Korea, 1993) . Water temperature and salinity along the open boundaries are obtained from the results of field observation s.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.18 no.3
• /
• pp.4195-4205
• /
• 1976

The purpose of this study is to evaluate the existing methods for calculating or estimating the consumptive use (Evaportranspiration) of any agricutural development project area. In determing the consumptive use water in the project area, there will require the best way for estimating irrigation requirement. Many methods for computing the evaportranspiration have been used, each of them with its merits and demerits at home and abroad. Some of these methods are listed as follows: 1.The Penman's formula 2.The B1aney-Criddle method 3.The Munson P.E. Index method 4.The Atmometer method 5.The Texas Water Rights Commission (TWRC) method 6.The Jensen-Haise method 7.The Christiasen method Therefore, the authors will introduce the more widely used method for calculating Consumptive Use by G.H. Hargreaves. The formula is expressed in the form Ep= K·d·T (1.0-0.01·Hn) Hn=1.0+0.4H+0.005H2. This method was adopted for the first time to determine the Irrigation requirements of Ogseo Comprehensive Agricultual Development project (Benefited area:100,500ha) in Korea. This method is presented in somewhat greater detail than the others. Formula is given for the computation of evaportranspiration (with various levels of data availability) Sampel computation of irrigation requirements for Ogseo irrigation project is included. The results and applied materials are summarized as follows. 1. In calculating the Hargreaves formula, the mean temperature relative, humidity, length of day, and percentage of sunshine from three stations of Iri, Jeonju, and Gunsan were used. 2. Monthly evaporation values were calculated by using the formula. 3. Meteological data from the three stations records for the ten years (1963∼1972) were used. 4. The annual irrigation requirements is 1,186mm per hectare, but the case to consider effective rainfall amount takes the annual irrigation demand being 700mm per hectare.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.4
• /
• pp.335-340
• /
• 1998

This study was conducted to determine the morphological responses of barley seedlings to NaCl stress and to investigate histological changes of cells with transmission electron microscope(TEM) after NaCl stress. Plant height and root length of 10-day old barley seedlings with NaCl stress were reduced and inhibition level was found to be more severe in the plant height than in the root length. The leaf length, leaf width and leaf area were shorter as well with NaCl stress than without NaCl stress. However, there was no difference in the number of roots between NaCl treatments. The weight of dry matter decreased at higher NaCl concentrations, especially at 100mM NaCl. The water content of shoots tend to decrease at higher NaCl concentrations, but there was no difference in the water content of roots, The reduced sugar content was greatly increase than starch. Cellulose content was higher in NaCl stressed-plant than control, and tended to decreased at higher NaCl concentrations. Lignin content also decreased NaCl stressed-plant but there was no tendency at NaCl stress concentrations. Electric conductivity of cell sap with seedlings was high with NaCl stressed-plant. Amount of cell sap gradually increased with time in the roots than in the shoots, The grana of chloroplasts was changed by 150mM NaCl concentration. The christe of mitochondria in root meristematic sells ruined in structure and cell wall of leaf and root was also ruined by NaCl stress.