• Journal of Biosystems Engineering
• /
• 제29권2호
• /
• pp.101-108
• /
• 2004

The objectives of this study were to determine the natural frequency of a walking-type cultivator's handle using a modal analysis, to determine whether or not the handle resonates with forcing frequency induced by its engine, and to determine a method to reduce the handle vibration using a technique of the operational deflection shapes(ODS). Results of the study are as follows: The natural frequencies of the handle up to third harmonics were found to be 20.4, 22.5 and 92.1 Hz in the vertical direction and 14.9, 93, and 132 Hz in the horizontal direction. It was found that the handle does not resonate with the forcing frequency of the engine, which is 52 Hz. The operational deflection shape analysis revealed the deflected shapes of the handle in the vertical and horizontal directions and suggested that the handle vibration can be reduced by adding some mass to the place where the largest deflection occurs. Attaching of 1.1 kg mass adjacent to the largely deflected area resulted in reductions of vibration from 9.45 to 8.03 m/s$^2$ in x-axis direction from 3.89 to 3.16 m/s$^2$ in y-axis direction and from 7.89 to 3.09 m/s$^2$ in z-axis direction, which are respectively 15, 19 and 61% reductions. The total vibration level was reduced by 29%, indicating that mass-adding method by the ODS is very effective for reducing the handle vibrations of the cultivators.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.307-307
• /
• 2017

There is a growing need to understand how local, farm household, and elementary units are responding to changes in agricultural conditions due to increased internal and external agrarian conditions and increased uncertainty in agricultural management due to increasing FTA and climate change. Therefore, we analyze dynamics of changes through more detailed and precise gathering of information related to agricultural products and DB, and by analyzing the satisfaction level of the first year panel survey by constructing a producer panel for utilization in agricultural research and policy. A total of 500 farmers in the producer panel who mainly grow rice, garlic, onion, strawberry, apple were collected through questionnaires. The actual analysis used data from a total of 393 farm households, including 82 farms of rice, 51 farms of apple, 100 farms of garlic, 88 farms of onion and 72 farmhouses of strawberry. The distribution by age was similar to the distribution of rural ages in Korea, with 2.8% under 30s, 17.6% in 40s, 32.4% in 50s, 37.5% in 60s and 9.7% in 70s. Panel happiness and rural life satisfaction were examined using the 7 - point Likert scale and the analysis method was one - way ANOVA. The results showed that the happiness of garlic and strawberry cultivator was significantly higher than that of rice and onion cultivator. However, the satisfaction of rural life did not show any difference among the cultivars. As a result of difference verification about Agricultural Outlook and Crop-specific Outlook after 5 years, there was no difference between the crops in terms of prospects for Korean agriculture after five years, but a survey of industrial prospects for crops after five years showed that the rice growers have a significantly negative outlook compared to garlic, onion and strawberry growers, and garlic and onion growers have a more positive outlook than rice and apple growers As a result of verifying whether there is a difference in ages between the agricultural prospects and the industrial prospects by crops after 5 years, there was no difference between the ages of prospects for Korean agriculture after 5 years, However, in the survey on industrial prospects by crops after 5 years, 40s were more positive than 60s.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.154-161
• /
• 2000

A series of soil bin experiment was carried to investigate the effects of rotary blade shape, rotational direction of rotary blade, number of blade and soil cutting disk blade on the characteristics of partial tillage. Among the three types of rotary blades, rotary blade for cultivator was considered to be proper for partial tillage of direct seeder considering the torque requirements and ratio of soil breaking. There is no need to attach so many blades to the rotary shaft. Four rotary blades were enough for efficient partial tillage by rotary tiller. Though soil cutting disk blade assisted the better formation of seedbed furrow, attachment of the soil cutting disk blade increased torque requirements.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.802-811
• /
• 1996

Farmers need alternatives for weed control due to the desire to reduce chemicals used in farming. However, conventional mechanical cultivation cannot selectively remove weeds located in the seedline between crop plants and there are no selective heribicides for some crop/weed situations. Since hand labor is costly , an automated weed control system could be feasible. A robotic weed control system can also reduce or eliminate the need for chemicals. Currently no such system exists for removing weeds located in the seedline between crop plants. The goal of this project is to build a real-time , machine vision weed control system that can detect crop and weed locations. remove weeds and thin crop plants. In order to accomplish this objective , a real-time robotic system was developed to identify and locate outdoor plants using machine vision technology, pattern recognition techniques, knowledge-based decision theory, and robotics. The prototype weed control system is composed f a real-time computer vision system, a uniform illumination device, and a precision chemical application system. The prototype system is mounted on the UC Davis Robotic Cultivator , which finds the center of the seedline of crop plants. Field tests showed that the robotic spraying system correctly targeted simulated weeds (metal coins of 2.54 cm diameter) with an average error of 0.78 cm and the standard deviation of 0.62cm.

• 농업과학연구
• /
• 제34권2호
• /
• pp.189-200
• /
• 2007

The purpose of this study is to evaluate the farmland scale improvement project and to present basic data for establishing a long-term improvement scheme of this project. Professional rice cultivators' farming scale after receiving the farmland scale improvement fund has increased compared to the situation before receiving the fund support. The average paddy fields increased by 220% (from 2.75ha to 8.82ha), the average upland increased by 27% (from 0.44ha to 0.56ha), and the average orchard land increased by 44% (from 0.25ha to 0.36ha). The rice production costs per 10a are estimated as 608,678won for below 3ha, 488,721won for 3-6ha, 487,431won for 6~10ha, and 425,313won for over 10ha, which decreased with increasing farming scale. The effects of the farmland scale improvement project on income variation are summarized as follows. 1) Average farm household income for all subjects has increased by 223 % (from 40,517,000won to 90,295,000won). 2) For each category, the results show that average farm household income has increased by 9,766,000won for below 3ha, 35,898,000won for 3~6ha, 42,822,000won for 6~10ha, and 72,697,000won for over 10ha.

• Journal of Biosystems Engineering
• /
• 제29권5호
• /
• pp.385-394
• /
• 2004

The objectives of this study were to investigate the effectiveness of rubber as an engine mount of walking-type cultivators and to determine its optimal spring constant and damping coefficient using a dynamic simulation of the engine mount system. Four different types of rubber mounts were tested to determine their spring constants and damping coefficients, and the best type was selected for the isolation of the engine vibrations transmitted to the handle. The total vibration levels transmitted to the handle when the rubber mounts weren't installed were 17.52 $m/s^2$. The total vibration levels transmitted to the handle when the rubber mounts were installed were 10.69 $m/s^2$ for Stripe 1, 11.33$m/s^2$ for Stripe 2, 10.92$m/s^2$ for Stripe 3 and 14.19$m/s^2$ for Hive, respectively, resulting in an average of $30\%$ reduction when compared with that without the engine mount. A dynamic model of the cultivator's engine-mount system and its simulation program were developed and verified. A method was proposed to determine the optimal spring constant and damping coefficient of the engine-mount system. It was found from the simulation that a spring constant of 4,100 kN/m and the largest damping coefficient were the most effective for the vibration isolation.

• 한국전자통신학회논문지
• /
• 제13권6호
• /
• pp.1365-1372
• /
• 2018

최근 농업 사회의 고령화로 인해 농기계로 인한 안전사고가 급증하고 있다. 어떤 경우에는 부상자가 사고를 주위에 알리지 못한 채 홀로 방치되어 심각한 상황에 이를 수 있다. 경운기, 이앙기, 트랙터, 콤바인 등 농기계를 대상으로 작업 및 이동 중에 전복, 충돌, 기타 사고 등의 안전사고 발생 시 ICT 기술을 이용하여 신속하게 사고 상황을 외부에서 감지하고 전달함으로써 인명 피해를 최소화 할 수 있는 시스템이 요구되고 있다. 본 연구에서는 농기계의 충돌 및 전복 사고를 감지하고, 위험상황을 전송하는 ICT 기반의 농기계 안전사고 자동상황전파시스템을 제안한다. 제안된 시스템은 농기계 사고 발생 시 자동으로 가족, 지인, 병원 및 119로 문자 메시지를 보냄으로써 빠른 사후 조치를 통한 인명구조를 가능하게 한다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2002년도 동계 학술대회 논문집
• /
• pp.104-110
• /
• 2002

본 연구는 보행형 관리기의 손으로 전달되는 진동특성을 실험적으로 해석하고 평가하며 방진 방안을 제시할 목적으로 수행되었다. 관리기의 작업기 중에서 설문을 통해 사용 빈도가 높은 3개의 작업기(중경로터리, 중경제초기, 구굴기)를 선정하였고 각 작업기별 진동수준을 측정하였다. 진동 방지 방안에 대해서는 4개의 방진 장치(고무 패드, 방진 장갑, 핸들 방진 장치, 엔진 마운트)를 선정하여 각 방진 장치별 진동수준을 측정하였다. 방진 장치의 성능을 정확하게 비교하기 위해 진동의 측정은 진동수준이 가장 높은 구굴기에서 수행되었다. 실험결과에 의하면 관리기 작업이 작업자의 인체에 해를 끼칠 위험이 매우 크지만 이 결과는 작업자가 매일 3시간씩 관리기를 사용할 경우를 기준으로 설정한 값이기 때문에 실제로 관리기 사용일수가 많지 알은 대부분의 우리나라 사용자들에게 적용하는데는 한계가 있음을 밝힌다. 그렇다 하더라도 관리기의 주 사용자는 보행형 관리기 뿐만 아니라 보행형 경운기나 보행형 이앙기 등의 손으로 전달되는 진동이 심한 기계를 함께 사용하는 경우가 많음을 고려하면 방진 장치를 개발하거나 진동수준이 낮은 농작업기계를 개발하여 작업환경을 개선하는 조치가 필요하다고 생각한다. 그러므로 농작업기계에 대한 진동수준에 대한 종합적인 연구와 그에 대한 대책 마련이 지속적으로 수행되어야 할 것이다.

• 현장농수산연구지
• /
• 제3권1호
• /
• pp.30-47
• /
• 2001

This research was performed to develope a stable direct seeding method in rice cultivation using by a direct seeder with soil application. A principle of this methodology was introduced from seeding nursery system of machine transplanting enable to increase high seeding establishment direct seeding method with soil application was high of 89-95% while that of water seeding was 68%. During seeding growth plant height was ralatively small but seeding health was high. A total soil consumption of this methodology was 145kg/10a in dirll seeding and 26kg/10a in hill seeding respectively, there was 100% erected in direct seeding with soil application while water seeding was 45% in erected seeding stand. In direct seeding method with soil application total carbohydrate content was higher than that of water seeding. This machine was manufactured to attach and/or detach to a machine transplanter with riding type and machine cultivator with multipurpose. In the farmer's demonstrated rice field this method was well performed like machine transplanting in terms of rice growth and development. There was highly cost reduction for rice production like other direct seeding methods.

• Journal of Biosystems Engineering
• /
• 제43권4호
• /
• pp.273-284
• /
• 2018

Purpose: Conventional headland turning typically requires repeated forward and backward movements to move the farming equipment to the next row. This research focuses on developing an upland agricultural robot with an optimized headland turning mechanism that enables a $180^{\circ}$ turning positioning to the next row in one steering motion designed for a two-wheel steering, four-wheel drive agricultural robot named the HADA-bot. The proposed steering mechanism allows for faster turnings at each headland compared to those of the conventional steering system. Methods: The HADA-bot was designed with 1.7-m wide wheel tracks to travel along the furrows of a garlic bed, and a look-ahead path following algorithm was applied using a real-time kinematic global positioning system signal. Pivot turning tests focused primarily on accuracy regarding the turning radius for the next path matching, saving headland turning time, area, and effort. Results: Several test cases were performed by evaluating right and left turns on two different surfaces: concrete and soil, at three speeds: 1, 2, and 3 km/h. From the left and right side pivot turning results, the percentage of lateral deviation is within the acceptable range of 10% even on the soil surface. This U-turn scheme reduces 67% and 54% of the headland turning time, and 36% and 32% of the required headland area compared to a 50 hp tractor (ISEKI, TA5240, Ehime, Japan) and a riding-type cultivator (CFM-1200, Asia Technology, Deagu, Rep. Korea), respectively. Conclusion: The pivot turning trajectory on both soil and concrete surfaces achieved similar results within the typical operating speed range. Overall, these results prove that the pivot turning mechanism is suitable for improving conventional headland turning by reducing both turning radius and turning time.