• Korean Journal of Biological Psychiatry
• /
• v.20 no.3
• /
• pp.111-117
• /
• 2013

Objectives We investigated the effectiveness and safety when treated in schizophrenics with paliperidone palmitate, a long acting injectable antipsychotic. Methods This was a 24-week open-label study, performed at one center in Korea. The eligible patients with schizophrenia diagnosed by Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition, Text Revision (DSM-IV-TR) criteria were enrolled. Patients received long-acting paliperidone palmitate injection (234 mg, baseline; 156 mg, week 1 ; then once 4 weeks flexible dosing). Effectiveness assessments were measured by the Positive and Negative Syndrome Scale (PANSS), The Clinical Global Impression Severity Scale (CGI-S), The Personal and Social Performance (PSP) at baseline, week 1, every 4 weeks untill 24 weeks or endpoint. Safety assessments were measured by The Extrapyramidal Symptom Rating Scale (ESRS), body weight (BW) and incidence of adverse events. Oral antipsychotics were stopped or tapered off within next 14 days. Results Of 20 patients recruited, 9 patients (45%) completed the study. Paliperidone palmitate produced a significant improvement in PANSS total score from baseline to endpoint. The response rate was 75% [mean change (${\pm}SD$) $-25.9{\pm}14.4$, all p < 0.001]. The CGI-S and PSP total scores significantly improved during 24 weeks (All p < 0.001). Eighty percent of patients reported adverse events and most common adverse events (${\geq}10%$) in paliperidone palmitate were anticholinergic adverse event, extrapyramidal symptoms, weight gain, akathisia, insomnia, headache, agitation, anxiety and GI trouble. ESRS score is not statistically significant, but tends to get better at the end of the study when compared to baseline. Conclusions Our study results demonstrated maintained effectiveness and safety of paliperidone palmitate treatment in schizophrenics. And provides both clinicians and patients with a new choice of treatment that can improve the outcome of long term therapy. Their potential effectiveness and safety should be better addressed by future randomized-controlled trials.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.348-348
• /
• 2011

Carbon nanotube (CNT) field effect transistors and sensors use CNT as a current channel, of which the resistance varies with the gate voltage or upon molecule adsorption. Since the performance of CNT devices depends very much on the CNT/metal contact resistance, the CNT/electrode contact must be stable and the contact resistance must be small. Depending on the geometry of CNT/electrode contact, it can be categorized into the end-contact, embedded-contact (top-contact), and side-contact (bottom-contact). Because of difficulties in the sample preparation, the end-contact CNT device is seldom practiced. The embedded-contact in which CNT is embedded inside the electrode is desirable due to its rigidness and the low contact resistance. Fabrication of this structure is complicated, however, because each CNT has to be located under a high-resolution microscope and then the electrode is patterned by electron beam lithography. The side-contact is done by depositing CNT electrophoretically or by precipitating on the patterned electrode. Although this contact is fragile and the contact resistance is relatively high, the side-contact by far has been widely practiced because of its simple fabrication process. Here we introduce a simple method to embed CNT inside the electrode while taking advantage of the bottom-contact process. The idea is to utilize a eutectic material as an electrode, which melts at low temperature so that CNT is not damaged while annealing to melt the electrode to embed CNT. The lowering of CNT/Au contact resistance upon annealing at mild temperature has been reported, but the electrode in these studies did not melt and CNT laid on the surface of electrode even after annealing. In our experiment, we used a eutectic Au/Al film that melts at 250$^{\circ}C$. After depositing CNT on the electrode made of an Au/Al thin film, we annealed the sample at 250$^{\circ}C$ in air to induce eutectic melting. As a result, Au-Al alloy grains formed, under which the CNT was embedded to produce a rigid and low resistance contact. The embedded CNT contact was as strong as to tolerate the ultrasonic agitation for 90 s and the current-voltage measurement indicated that the contact resistance was lowered by a factor of 4. By performing standard fabrication process on this CNT-deposited substrate to add another pair of electrodes bridged by CNT in perpendicular direction, we could fabricate a CNT cross junction. Finally, we could conclude that the eutectic alloy electrode is valid for CNT sensors by examine the detection of Au ion which is spontaneously reduced to CNT surface. The device sustatined strong washing process and maintained its detection ability.

• Korean Journal of Food Science and Technology
• /
• v.35 no.3
• /
• pp.417-422
• /
• 2003

The onions are considered to be a favorable functional source of beverage because they contain much sugar and various nutrients, and they are juicy vegetable. Recently, consumers have a new trend to take functional foods with health benefits. To meet this need, this study was the basic research to establish a manufacturing process of functional onion beverage by glucose oxidase. Glucose oxidase catalyzes reaction of glucose oxidation and makes generation of gluconic acid. Kinetics of the reaction was also investigated, and maximum glucose consumption rate $(V_{max})$ of $26.1{\times}10^{-2}\;g/L{\cdot}min$ and $K_m$ of 5.84 g/L were obtained. Optimum conditions were obtained when the glucose oxidase catalyzed reaction was carried out at temperature of $25^{\circ}C$, agitation rate of 450 rpm and aeration rate of 4 vvm in a 2.5 L jar fermentor. Finally, the enzyme reactor was 10-times scaled up and a similar glucose oxidation performance was achieved in the scaled-up reactor.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.1
• /
• pp.29-37
• /
• 2024

In this study, recycled concrete aggregates (RCA) were treated in a 5-kg-scale prototype reactor with carbon dioxide (CO₂) to enhance their material quality and geotechnical performance. The aggregate crushing value (ACV) and California bearing ratio (CBR) were measured on untreated RCAs and CO₂-treated RCAs. After CO₂ treatment, the ACV decreased from 35.6% to 33.2%, and the CBR increased from 97.5% to 102.4%. The CO₂ treatment caused a reduction of fine particle generation and an increase in bearing capacity through carbonation. When CO₂ treatment was performed with mechanical agitation, which provided additional enhancement in mechanical quality, the ACV was reduced further to 30.3%, and the CBR increased to 137.7%. If upscaled effectively, the proposed CO₂ treatment technique would be an effective method to reduce carbon emissions in construction industries.

• Journal of Korean Theatre Studies Association
• /
• no.52
• /
• pp.319-357
• /
• 2014

Formation of 'body schema' is the start for actor to create role and becomes the root and the foundation of existing as a role on the stage. For this, an actor needs to form 'scheme of role' with escaping from own 'body schema.' 'Schema of role' is formed by acquiring through synthesizing daily basic actions, namely, walking, standing, sitting, hand stretching, bending, and touching. The body schema, which was made with simple and usual actions, has fundamental significance in a sense of becoming the body in which the past traces in a role are habituated while energy as a role flows. As for the process of forming body schema, an actor first needs to obtain the visualized materials like photo, magazine, picture and image available for seeing a role specifically and clearly based on what analyzed a character. An actor needs to have three-dimensional image available for always recalling it in the head during acting. To do this, image data available for fundamentally capturing routine actions along with body structure are still more useful. Next, the body schema is formed by interaction with environment. Thus, there is a need of passing through the two-time process of forming body schema. Firstly, the body schema is made on routine actions in a role as physical condition of a role in actor's own everyday life. Secondly, the body schema is made on routine actions available for moving efficiently and economically in line with the environment of performance. A theatrical stage is the temporal space of rhythm and rule different from routine space. What forms body schema immediately in the second phase without body schema in the first phase ultimately becomes what exists as actor's own body, not the body of a role. The body schema, which was formed as the second process, is what truly has identity as a role in the ontological aspect, comes to experience the oppositional force in muscle, a qualitative change in energy, and emotional agitation in the physical aspect, and experiences perception, thinking, volition, and even consciousness with the entire body in the cognitive dimension. Thus, the formation of body schema can be known to be just a method of changing even spiritual and emotional layer. Body schema cannot be made if there is no process of embodiment and habit. Embodiment and habit are not simply the repeated, empty and mechanical action in the body. But, habit itself has very important meanings for forming body schema for role creating. First, habit allows the body itself to learn and understand a meaning. Second, habit relies upon environment, thereby allowing an actor of making the habituated body schema to recognize environment. Third, habit makes the mind. The habituated body schema is just the mind and the ego of a person who possesses the body schema. Fourth, habit comes to experience the expansion in energy and the expansion in existence. It may be experienced through interrelation among actor's body, tool, and environment. Fifth, habit makes identity of the body. Hence, this just becomes what secures identity of a role. These implications of habit are the formation of body schema, which is maintained with the body of being remembered firmly through being closely connected with the process of neural adaptation. Finally, it sought for possibility of practice as one method of forming body schema for role creating through Deleuze's '-becoming' theory. As 'actual animal-becoming' is real '-becoming' of forming structural transformation in the physical dimension, it meets with what the formation of body schema pursues actuality and reality. This was explained with a concept as saying of 'all '-becoming' molecular' by Deleuze/Guattari. 'Animal of having imitated animal's characteristic- becoming' is formed by which the body schema relies upon environment. In this way, relationship among the body, tool and environment has influence even upon a change in consciousness, thinking, and emotion, thereby being able to be useful for forming body schema in a sense of possibly experiencing ultimately expansion in role, namely, expansion in existence.