• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1276-1278
• /
• 1998

In this paper, aging characteristics of silicone rubber used for outdoor insulation have been investigated with regards to sunlight effect. For this purpose, silicone rubbers were aged under the artificial sunlight by use of xenon arc lamp(1500W) and various tests were performed such as tracking, breakdown, contact angle, stress, strain. And then, in order to elucidate the changes of material, analysis have been followed as follows; FT-IR, SEM and EDS. Regarding the effect of the sunlight, it was obs that the surface of test samples are severely da with decreased hydrophobicity, tracking resistan breakdown strength.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.83-83
• /
• 2000

Alkylketene dimer was known as a cellulose reactive or alkaline size because it does not require to fix to the fiber as do the traditional rosin sizes. A proposed sizing mechanism of AKD was the formation of P -ketoester bond between AKD and cellulose which provides the permanent attachment and the orientation of the hydrophobic alkylchains outward. However, some questions about the reaction had arisen and thus, the sizing mechanism of AKD has been a subject of controversy for several decades. The major concern of the controversy is that AKD is really reactive with cellulose or not in the papermaking conditions. In this study, reaction between AKD and pulp fiber was investigated, in order to find out whether AKD forms P-ketoester with pulp fiber during aging under no catalyzed neutral condition with obvious spectroscopic evidence. In addition, effect of aging treatment on the sizing development was studied. It has been disclosed that, in absence of water, AKD reacted with cellulose to form P -ketoester linkage under no catalyzed neutral condition, while, in presence of water, most of AKD was hydrolyzed to a dialkyl ketone or P -ketoacid. In addition, during the aging treatment of AKD-sized paper, its typical IR spectra bands gradually were reduced, completely disappeared after 6hr aging, and formed new absorption bands at 1707cm-' and shoulder peak at 1700cm-' which refer to the typical dialkylketone absorption bands. Therefore, the formation of P -ketoester between AKD and pulp fiber is impossible in the practical papermaking process. It could be suggested that the sizing development of AKD-sized paper is obtained by next two mechanism: 1) formation of a thin-layer of AKD on the fiber surface through melting and spreading of AKD emulsion particles by heat and 2) the hydrolysis of AKD to dialkyl ketone which has higher melting point, during drying and storage of AKD sized papers.

• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.2
• /
• pp.96-102
• /
• 2006

Development of Rotation-Cylinder Method(RCM) is given for Mg-Al-Zn-X(X=Sr) alloys, identifying some of the key factors that need to be controlled and indicating subsequent casting processes. Effects of Sr addition on the microstructure and mechanical properties of as-cast and T6 heat-treated Mg-Al-Zn-X alloys fabricated by the RCM were investigated. The microstructural and mechanical characterizations were performed by utilizing optical microscope, scanning electron microscope, transmission electron microscope, hardness test and ultimate tensile test. The solution and aging treatment time was varied to optimize the T6 heat treatment conditions, and experimental results were discussed. The grain size of Sr containing alloys was refined by increasing Sr content, but the tensile and yield strengths were increased by addition up to 1wt% Sr.

• Journal of Korean Gerontological Nursing
• /
• v.20 no.sup1
• /
• pp.160-165
• /
• 2018

Purpose: There is a need to examine changes in the health care environment and the impact on gerontological nursing care in the era of the Fourth Industrial Revolution. In this article recent healthcare paradigm changes, gerontechnology, high tech and high touch, person-centered approaches are discussed. Methods: A narrative review was used. Results: Cyber physical system, artificial intelligence, advance and convergence of bioengineering, and information communication technology are changing the health care paradigm to "precision", "prediction" and "personalization". Entry into the global aging society and the surge in the elderly population worldwide has led to searches for a new means to prepare for projected demands of this growing population. Thus, efforts such as gerontechnology have been made to apply and utilize recent innovative science and technology in order to promote the health and life of elders. There is a great emphasis on the convergence of high tech and high touch, in which humanistic and artistic approach are critical in order to assure that technology is beneficial to human beings rather than harmful. Conclusion: Positive healthcare experiences among patients and their families are emphasized by utilizing new technology and employing high touch while providing personalized care with a person-centered approach.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.717-724
• /
• 2018

To prepare for the explosive increase in maintenance costs of bridges according to the aging of infrastructure, future maintenance costs of bridges should be predicted. For this purpose, the management status of bridges was investigated and modeled as the upper limit of the performance level and the target management level according to the life cycle. This paper proposes methodologies and procedures for estimating the bridge maintenance costs using two models and existing cost and performance prediction models that consist of unit repair cost model according to the safety score, performance degradation model of bridges, unit reconstruction cost, and average reconstruction time. To verify the applicability, future maintenance costs can be forecasted for specific management agency considering the number of bridges, degree of aging, and current management status. As a result, it is possible to obtain the maintenance cost and safety level of an individual bridge level for each year. In addition, by summing them up to the agency level, the average safety score, ratio of the safety level, inspection costs, repair costs, and reconstruction costs can be obtained. In a further study, the changes in maintenance costs can be analyzed according to the changes in the target management levels using the developed method. The optimal management level can be suggested by reviewing the results.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.146-153
• /
• 2022

Purpose: In the case of domestic port facilities, port structures that have been in use for a long time have many problems in terms of safety performance and functionality due to the enlargement of ships, increased frequency of use, and the effects of natural disasters due to climate change. A big data analysis method was studied to develop an approximate model that can predict the aging pattern of a port facility based on the maintenance history data of the port facility. Method: In this study, member-level maintenance history data for caisson-type quay walls were collected, defined as big data, and based on the data, a predictive approximation model was derived to estimate the aging pattern and deterioration of the facility at the project level. A state-based aging pattern prediction model generated through Gaussian process (GP) and linear interpolation (SLPT) techniques was proposed, and models suitable for big data utilization were compared and proposed through validation. Result: As a result of examining the suitability of the proposed method, the SLPT method has RMSE of 0.9215 and 0.0648, and the predictive model applied with the SLPT method is considered suitable. Conclusion: Through this study, it is expected that the study of predicting performance degradation of big data-based facilities will become an important system in decision-making regarding maintenance.

• Journal of the Society of Disaster Information
• /
• v.18 no.2
• /
• pp.290-305
• /
• 2022

Purpose: Currently, port facility informatization technology is focused on the planning and design phases, so the necessity of research and technology development on the port facility maintenance system based on life cycle-level information is emphasized. Method: Based on the maintenance history data of port facilities and facility operation information, from the perspective of the life cycle of port facilities, the system is configured to enable maintenance decisions for port facilities through analysis of aging patterns, performance degradation prediction models, and risk analysis and proposed a method of expressing information. Result: A function was developed to simultaneously display the SOC performance evaluation and the comprehensive performance evaluation developed in this study, so that mid-to long-term maintenance and reinforcement and facility expansion can be applied and comparatively judged. Conclusion: The integrated port performance system developed in this study induces and supports the risk minimization of port facility management by proactively promoting appropriate repair and reinforcement measures through historical and operational information on port facilities.

• The Korea Journal of Herbology
• /
• v.27 no.3
• /
• pp.67-74
• /
• 2012

Objectives : The present study was designed to investigate effects of Ssanghwa-tang (Shu$\bar{a}$nghu$\bar{a}$-g$\bar{e}$ng) on oxidation/reduction reaction-related and aging-related enzymes $in$ $vitro$. Methods : We performed MTT assay, collagenase inhibition assay, elastase inhibition assay, tyrosinase inhibition assay, DPPH free radical scavenging assay, SOD-like activity and xanthine oxidase (XO) inhibition assay. Results : The 50% ethanol (EtOH) extract of Ssanghwa-tang (SHT) showed 55% inhibition of collagenase activity, and 42% inhibition of elastase activity at 1 mg/ml concentration. Also it's treatment showed 18% inhibition of tyrosinase activity, to relate whitening effect, at the same dose of 50% ethanol extract of SHT. Antioxidant activities were determined by DPPH radical scavenging, XO inhibiting activity and SOD-like activity. These scavenging, XO-inhibiting and SOD-like activities were measured in 80%, 75%, and 28% inhibitions, respectively, at a 1 mg/ml treated dose, compared to those of control. The inhibitory effects of 50% EtOH extract on aging and oxidation-related enzyme activities were higher than those of water extract and 95% EtOH extract. Conclusions : Taken together, our findings suggest that the SHT has potential and applicable benefits for development of cosmetics to have anti-aging (anti-wrinkle and whitening) and anti-oxidation functions.

• Smart Structures and Systems
• /
• v.5 no.4
• /
• pp.369-379
• /
• 2009

The sudden collapse of Interstate 35 Bridge in Minneapolis gave a wake-up call to US municipalities to re-evaluate aging bridges. In this situation, structural health monitoring (SHM) technology can provide the essential help needed for monitoring and maintaining the nation's infrastructure. Monitoring long span bridges such as cable-stayed bridges effectively requires the use of a large number of sensors. In this article, we introduce a probabilistic approach to identify optimal locations of sensors to enhance damage detection. Probability distribution functions are established using an artificial neural network trained using a priori knowledge of damage locations. The optimal number of sensors is identified using multi-objective optimization that simultaneously considers information entropy and sensor cost-objective functions. Luling Bridge, a cable-stayed bridge over the Mississippi River, is selected as a case study to demonstrate the efficiency of the proposed approach.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.177-179
• /
• 1997

본 연구에서는 최근 그 사용이 급증하고 있는 옥외용 절연재료에 대한 열화특성을 평가하기 위하여 펄렛상태의 EPDM 원 시료를 Hot plate를 이용하여 씨트로 제작하였다. 기후조건에 대응하는 열 싸이클에 의해 절연재료에 일어나는 화학적, 전기적 특성변화를 조사하기 위하여 주기적인 열싸이클을 가하면서 일정 기간별로 유전특성과 표면누설전류 및 표면의 화학적 변화에 대하여 측정하였다. 또한 접촉각 측정을 통하여 EPDM의 전기적 화학적 열화 또는 성질 변화에 대하여 검토하였다. 측정 결과 EPDM은 비교적 단기간의 열싸이클에 대해서 전기적 화학적 특성변화는 그다지 나타나지 않는 것으로 나타났다.