• Journal of Korea Foundry Society
• /
• v.34 no.5
• /
• pp.156-161
• /
• 2014

This study is focused on the effect of $Al_2Ca$ as a modifier on eutectic Si modification of A356 alloy. Microstructural observation was carried out for as-cast, as-solution treated and as-aged samples. Solution treatment and aging were performed for 2, 4, 6 and 10 hrs at $540^{\circ}C$ and $170^{\circ}C$, respectively. Although A356 alloy, which $Al_2Ca$ was added, has no significant difference in as-cast phases with normal A356 alloys, it shows much more modified eutectic Si, grain refinement and improved tensile property both in as-cast and as-heat treated conditions. TGA result shows that $Al_2Ca$ added A356 alloy has a certain improvement in oxidation resistance.

• Korean Institute of Interior Design Journal
• /
• v.25 no.3
• /
• pp.21-30
• /
• 2016

For the elderly with declining sensory due to aging, various sense stimulation factors provided in indoor environment is desirable healing environment. This study aims to propose the direction of sensory healing environment by adapting the richness of natural environment in indoor place based on the biophilic design theory with implementation method of sensory richness environment. The healing environment was limited to the ward in the beginning, but it has widened its range to the whole place, and the lobby is considered quiet important to healing. Therefore, this study selected lobby space of geriatric hospital as study subject. As for the study method, we deducted the analytic matrix focusing on the property and elements of the direct and indirect experience of nature appearing in the biophilic design theory, and analyzed the field investigation of subject space. Also, this study paid attention to point where the hotel lobby leads the change of emotional environment, and conducted analysis and comparison by deciding this is what the hotel and geriatric hospital should direct to. As the result, the biophilic design factor of hotel is actively expressed by complex direction of various factors, but as for the geriatric hospital, it was rather passive and simple in expression. The adaptation ratio between hotel and geriatric hospital was almost more than twice times difference in average.

• Elastomers and Composites
• /
• v.54 no.3
• /
• pp.220-224
• /
• 2019

Herein, three polymer compounds were manufactured using three polymer combination methods, ethylene-vinyl acetate/ethylene-propylene-diene-copolymer (EPDM), ethylene-vinyl acetate (EVA)/polyethylene-A (PE-A; density: 0.870), and ethylene-vinyl acetate (EVA)/polyethylene-B (PE-B; density: 0.885), for making cable sheath for use in the shipping industry. In this study, EVA, EPDM, PE-A, and PE-B were used as matrix polymers, and EVA-grafted maleic anhydride was used as a coupling agent for compounding with various compounds such as a fire retardant, cross-linking agent, filler, and other additives, besides the plasticizer. ${\Delta}T$, Mooney viscosity, and tensile strength increased in order of EPDM < PE-A < PE-B, the probable reason is due to the different crosslinking effect. The three compounds showed similar results for fire resistance and aging resistance after compounding process, but they showed excellent cold resistance owing to the non-polarity of the polymers and sufficient plasticizer content.

• Korean Journal of Metals and Materials
• /
• v.46 no.11
• /
• pp.713-724
• /
• 2008

The need to lower the weights of automotive vehicle and to improve the safety of cars has resulted in the development of high strength steels such as TRIP(Transformation Induced Plasticity) and DP (Dual Phase) steel. It is well known that the higher strength of steel shows the poorer press formability. Among the high strength steels, DP steel shows several good characteristics such as low yield ratio, high initial n value, high elongation, high bake hardenability and anti-aging property. However, there's a certain limit in application of DP steels to the automotive panel parts because their poor deep drawbility caused by martensite. In this study, the effect of alloying elements on the deep drawability and recrystallization texture in TS 440MPa grade DP steel with 0.015~0.02% carbon has been investigated on the base of SEM, TEM, XRD and EBSD analysis.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.2
• /
• pp.23-33
• /
• 2021

In Korea, many reservoirs have been built for the purpose of solving the food shortage problem and supplying agricultural water. However, the current 75.6% of the reservoirs are in serious aged as more than 50 years have passed since the year of construction. In the case of such an aging reservoir, the stability due to scour and erosion inside the reservoir is very reduced, and if concentrated rainfall due to recent abnormal weather occurs, the aging reservoir may collapse, leading to a lot of damage to property and human life. Accordingly, each agency that manages aging reservoirs uses Ordinary Portland Cement (OPC) as an injection material and applies the grouting method. However, in the case of OPC, it may deteriorate over time and water leakage may occur again. And there are environmental problems such as consumption of natural resources and generation of greenhouse gases. So, there is a need to develop new materials and methods that can replace the OPC. In this study, an laboratory test and analysis were performed on the grout material developed to induce a curing reaction similar to that of OPC by recycling power plant byproduct. In addition, test in the field such as electric resistivity survey, Standard Penetration Test (SPT), and field permeability test were performed to analyzed to reinforcement effect and determine the possibility of using instead of OPC. As a results of the test, in the case of recycled power plant byproduct, the compressive strength was 2.9 to 3.2 times and the deformation modulus was 2.3 to 3.3 times higher, indicating that it is excellent in strength and can be used instead of OPC. And it was analyzed that the N value of the reservoir was increased by 1~2, and the coefficient of permeability (k) decreased to the level of 8.9~42.5%. showing sufficient reinforcing effect in terms of order.

• The Korean Society of Law and Medicine
• /
• v.15 no.1
• /
• pp.185-209
• /
• 2014

While the local health insurance and the employment-based insurance were integrated in July 2000, the insured is divided into employment-based insured and the local insured and the relevant premium has been applied to both groups. The health insurance premium having the feature of social solidarity has to be determined depending on income, that is, the ability to pay in accordance with the principles of social insurance. While employment-based insurance premium has been determined depending on the earned income, the local insurance premium for the local insured has been determined by scoring gross income(evaluated income), property and possession of automobiles. A variety of improvement approaches has been implemented including introduction of the employment-based insurance premium ceiling system (2002) and the change of property scoring system for the local insured (2006). However, the health insurance system which was merged in 2000 has been implemented up to now without significant change even though there were lots of socio-demographic change including increase of income level and the population structure such as low birth and aging. In other words, it is required to implement the premium rating system securing the income-based equity. Nevertheless, it was inevitable to apply the diverse rating standards in the early stage because it was very difficult to verify the income of the self-employed. Although the income verification rate was significantly increased from 23% in 1989 to 44% in 2010, the irrational standards including property, automobiles, living standard and activity rate have been still applied to the local insured because it is difficult to secure the validity of insurance premium rating system and it severely lacks of security. This paper investigated whether the current insurance premium rating system for the local insured imposing the premium on the basis of 'gender' and 'age' complies with the basic human rights secured by the current Constitution of the Republic of Korea with respect to the practical and theoretic irrationality of insurance premium rating system and standards for he local insured. In accordance with the analysis results, this paper proposed the approach to improve the system.

• Journal of Applied Biological Chemistry
• /
• v.65 no.4
• /
• pp.287-298
• /
• 2022

This study investigated the changes in the physiochemical property, phytochemical content, nutritional content and antioxidant activity of Polygoni multiflori Radix by steam, aging, and fermentation. After processing Polygoni multiflori Radix (PMR), pH slightly decreased, while acidity increased (pH 5.70→4.78, acidity 0.23→0.29%). The reducing sugar content increased after aging and fermentation from 1.19 mg/g (PMR) to 1.40 (fermented PMR, FPMR), 1.30 (red PMR, RPMR), 1.53 (fermented red PMR, FRPMR), 1.99 (black PMR, BPMR), and 2.33 mg/g (fermented black PMR, FBPMR). Total phenolic content was highest in PMR (6.05 mg/g) and total flavonoids and maillard product were increased after aging and fermentation of PMR, and were the highest in BPMR (1.60 mg/g) and FBPMR (2.76 O.D.), respectively. The major phytochemical was 2,3,5,4'-tetrahydroxystilbene-2-0-α-glucoside, which were highest in PMR (64.9 mg/g) with 46.47 mg/g at FPMR, 33.94 mg/g at RPMR, 48.76 mg/g at FRPMR, 36.68 mg/g at BPMR and 34.35 mg/g at FBPMR. The main fatty acids and free amino acids were detected as palmitic acid (C16:0) and proline, respectively. Generally, 2,2-diphenyl-1-picrylhydrazyl and 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt radical scavenging activities and FRAP reducing powers were shown high in PMR (39.06%, 98.32%, and 2.61 O.D. in extracts concentration 1.0 mg/mL), then were decreased after aging and fermentation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.5
• /
• pp.377-383
• /
• 2005

Because explosive fluid is used at high temperature or under high pressure in petrochemistry and refined oil equipment, the interest about safety of equipments is intensive. Specially, the safety of high pressure reactor vessel is required among them. The material selected in this study is 2.25Cr-1Mo steel that is widely used for high pressure reactor vessel material of petrochemical plant. Eight kinds of artificially aged specimens were prepared by differing from aging periods under three different temperatures. The material was iso-thermally heat treated at higher temperatures than $391^{\circ}C$ that is the operating temperature of high pressure reactor vessel. Vickers hardness properties and electrical resistivity properties about artificially aged material as well as un-aged material were measured, and master curves were made out from the correlation with larson-Miller parameter. And electrical resistivity properties as well as Victors hardness properties measured at high pressure reactor vessel of the field were compared with master curves made out in a laboratory. Degradation evaluation possibility in the field of high pressure reactor vessel by using electrical resistivity method was examined. Electrical resistivity property measured in the field is similar with that of artificially aged material in similar aging level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.534-544
• /
• 2017

In order to use the sea flowering plant, Zostera marina, as a cosmetic ingredient, this study was conducted to evaluate its antioxidant effect. We confirmed the formulation stability of the emulsion containing Zostera marina extracts. We studied the antioxidant activity of the dissolved Zostera marina extracts through the DPPH (1,1-Diphenyl-2-picrylhydrazy) radical scavenging activity assay and SOD (superoxide dismutase)-like activity assay. Also, the pH, viscosity and particle dispersion of the emulsion containing Zostera marina extracts were measured using a Turbiscan LAB. The emulsions were measured at one-week intervals in a thermostat chamber ($25^{\circ}C{\pm}1^{\circ}C$, $40^{\circ}C{\pm}1^{\circ}C$) for 28 days. The extracts of Zostera marina showed a DPPH radical scavenging rate of 86.21% and SOD-like activity of 99.24% at 5.00 mg/ml and exhibited a dose-dependent increase in their antioxidant activity. We measured the stability of the pH, viscosity and emulsion particles using the Turbiscan LAB in a thermostat chamber for 28 days. The formulations to which the Zostera marina extracts were added were considered to be stable, due to their negligible physical property changes over time during storage. The results suggest that the Zostera marina extracts with 70% ethanol (v/v) could be used in cosmetics as an antioxidant for the anti-aging of skin.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.450-455
• /
• 2002

Cu-cored Sn-Ag solder balls were fabricated by coating pure Sn and Ag on Cu balls. The melting behavior and the solderability of the BGA joint with the Ni/Au coated Cu pad were investigated and were compared with those of the commercial Sn-Ag and Sn-Ag-Cu balls. DSC analyses clarified the melting of Cu-cored solders to start at a rather low temperature, the eutectic temperature of Sn-Ag-Cu. It was ascribed to the diffusion of Cu and Ag into Sn plating during the heating process. After reflow soldering the microstructures of the solder and of the interfacial layer between the solder and the Cu pad were analyzed with SEM and EPMA. By EDX analysis, formation of a eutectic microstructure composing of $\beta$-Sn, Ag$_3$Sn, ad Cu$_{6}$Sn$_{5}$ phases was confirmed in the solder, and the η'-(Au, Co, Cu, Ni)$_{6}$Sn$_{5}$ reaction layer was found to form at the interface between the solder and the Cu pad. By conducting shear tests, it was found that the BGA joint using Cu-cored solder ball could prevent the degradation of joint strength during aging at 423K because of the slower growth me of η'-(Au, Co, Cu, Ni)$_{6}$Sn$_{5}$ reaction layer formed at the solder, pad interface. Furthermore, Cu-cored multi-component Sn-Ag-Bi balls were fabricated by sequentially coating the binary Sn-Ag and Sn-Bi solders on Cu balls. The reflow property of these solder balls was investigated. Melting of these solder balls was clarified to start at the almost same temperature as that of Sn-2Ag-0.75Cu-3Bi solder. A microstructure composing of (Sn), Ag$_3$Sn, Bi and Cu$_{6}$Sn$_{5}$ phases was found to form in the solder ball, and a reaction layer containing primarily η'-(Au, Co, Cu, Ni)$_{6}$Sn$_{5}$ was found at the interface with Ni/Au coated Cu pad after reflow soldering. By conducting shear test, it was found that the BGA joints using this Cu-core solder balls hardly degraded their joint shear strength during aging at 423K due to the slower growth rate of the η'-(Au, Cu, Ni)$_{6}$Sn$_{5}$ reaction layer at the solder/pad interface.he solder/pad interface.