• 한국재료학회지
• /
• 제23권1호
• /
• pp.18-23
• /
• 2013

In this study, the effects of cryogenic treatment cycles on the residual stress and mechanical properties of 7075 aluminum alloy (Al7075) samples, in the form of a tube-shaped product with a diameter of 500 nm, were investigated. Samples were first subjected to solution treatment at $470^{\circ}C$, followed by cryogenic treatment and aging treatment. The residual stress and mechanical properties of the samples were systematically characterized. Residual stress was measured with a cutting method using strain gauges attached on the surface of the samples; in addition, tensile strength and Vickers hardness tests were performed. The detailed microstructure of the samples was investigated by transmission electron microscopy. Results showed that samples with 85 % relief in residual stress and 8% increase in tensile strength were achieved after undergoing three cycles of cryogenic treatments; this is in contrast to the samples processed by conventional solution treatment and natural aging (T4). The major reasons for the smaller residual stress and relatively high tensile strength for the samples fabricated by cryogenic treatment are the formation of very small-sized precipitates and the relaxation of residual stress during the low temperature process in uphill quenching. In addition, samples subjected to three cycles of cryogenic treatment demonstrated much lower residual stress than, and similar tensile strength compared to, those samples subjected to one cycle of cryogenic treatment or artificial aging treatment.

• 대한한방부인과학회지
• /
• 제25권4호
• /
• pp.46-55
• /
• 2012

Objectives: It is well known that genetic factors and environmental factors play major role in aging skin. In general, son and daughter take after their parents in appearance. But comparability of skin properties in Korean family has not been well estimated. So we evaluated the correlation of skin properties in Korean mother-daughter pairs. Methods: 10 couples of mother and daughter pair(n=20) participate in this study. Mothers and daughters were aged $50.6{\pm}2.459$ and $23.8{\pm}2.15$ years, respectively. Skin moisture, sebum, skin color and elasticity is measured using non-invasive method : Corneometer CM825, Sebumeter(MPA580), Mexameter MX18, Cutometer MPA580. Statistical analysis program we used is Minitab 14 Korea. Results: The Skin moisture of mother group was significantly higher than daughter group. And skin elasticity(R2) of the daughter group was significantly higher than mother group. In the results of correlation analysis between mother and daughter pairs, skin elasticity(R2) had high positive correlation(r=0.729, p=0.026). But skin moisture, sebum, melanin index, erythema index and skin elasticity(R5) did not be confirmed a significant correlation. Conclusions: Skin elasticity(R2) is the only factor that showed high positive correlation significantly in mother and daughter pairs. Mother and daughter share the genetic factors and environmental factors that influence skin aging. So, mother's aging pattern will be a good guide for anti-aging of daughters.

• 한국전기전자재료학회논문지
• /
• 제18권1호
• /
• pp.43-49
• /
• 2005

Temperature stabilities of resonance frequencies of the substrates are very important in piezoelectric ceramics oscillators and fitters. In this study, it was investigated thermal resisting property of the length-extensional vibration mode of PZT ceramics. The mode can be utilized in fabricating ultra-small 55 kHz IF devices. We fabricated the ceramic specimens with x = 0.51, 0.52, 0.53, 0.54, and 0.55 in the Pb(Zr$\sub$x/Ti$\sub$1-x/)O$_3$ system. And their resonance frequencies were measured before 1st thermal aging, after 1st and 2nd thermal aging. In order to investigate the influence of thermal aging on thermal resisting properties, thermally aged specimens were once mote thermally aged. Before 1st thermal aging, the specimens of the compositions with morphotropic phase, x = 0.53 and rhombohedral phase, x = 0.54 have weak thermal resisting property of resonance frequency, while tetragonal phase, x = 0.51 has robust thermal resisting property of resonance frequency. 1st thermal aging improved thermal resisting property of resonance frequency in all specimens.

• 펄프종이기술
• /
• 제44권3호
• /
• pp.15-21
• /
• 2012

The optimum dewaxing ratio in dewaxing treatment by the heat and pressure method was investigated by considering aging stability of dewaxed Hanji. Commercial Hanji was coated with beeswax and thermally aged at $150^{\circ}C$ for 24 hours. Then it was dewaxed using the laboratory sheet press equipped with hot plates on both top and bottom sides. Dewaxing ratio was controlled by pressing temperature and time. Four type of dewaxed Hanji samples with different dewaxing ratio were prepared and thermally aged at $150^{\circ}C$. Then the aging stability of dewaxed Hanji samples was evaluated in terms of optical and strength properties. It was found that the aging stability of dewaxed Hanji was superior with higher dewaxing ratio. The result concluded that, in the aspect of aging stability, the coated beeswax in beeswax-treated Hanji shall be completely removed if the coated wax would be dewaxed.

• 약학회지
• /
• 제19권4호
• /
• pp.219-226
• /
• 1975

Physical and chemical properties on the aging inhibition mechanism of hydrous aluminum oxide were studied by means of dehydration velocity, activation energy, DTA, TGA, IR spectra, X-ray diffraction and TMA. During aging, changes may occur in the hydrous aluminum oxide structure which results in a loss of acid reactivity and in crystal formation to the hydrated hydrous alumina. The results obtained from the X-ray diffraction pattern and DTA, TGA thermogram studies showed that the aging product stabilized with either sorbitol or mannitol was hydrous aluminum oxide ($Al_{2}O_{3}{\cdot}xH_{2}O$) but the aging product not stabilized with either sorbitol or mannitol product not stabilized was hydrated hydrous aluminum oxide $Al_{2}O_{3}{\cdot}xH_{2}O{\cdot}yH_{2}O$. The activation energy of dehydration of the hydrous almina was about 17 Kcal. mol$^{1}$ deg$^{-1}$ which was observed a little less than that of 22 kcal.mol.$^{-1}$ deg.$^{-1}$ of or mannitol, the inhibition mechanism in the aging process from oxide is assumed to prevent the formation of the hydrated hydrous aluminum oxide and the aging process is thought of as analogous to the polymorphic transformations which occur as a system converts to its most stable state.

• 전기학회논문지
• /
• 제61권8호
• /
• pp.1148-1152
• /
• 2012

The vegetable-based insulating oils are substitutes for mineral oils in oil-filled transformer. The important properties of vegetable insulating oil is their higher flash/fire point and biodegradability than conventional mineral oils. The large oil-filled transformer eliminate the risk of explosion and fire should the transformer fail and oil ignite owing to high flash/fire point of vegetable insulating oil. In addition, higher biodegradability of vegetable insulating oils can let the oil spill damage reduced. In this experiment, the real oil-filled transformers using mineral oil and vegetable oil have accelerated aging. After working on the 100% accelerated aging experiment were conducted comparing the transformer. The hottest-spot temperature using thermal coefficients were calculated to determin the degree of accelerated aging. As a result, apply mineral oil transformer in accordance with the accelerated aging life come to an end. In contrast, vegetable insulating oils showed the opposite characteristics. Vegetable insulating oil compared to the mineral oil are found to be an long life. As a result, the vegetable oil has a long-term stability.

• 한국기계가공학회지
• /
• 제21권1호
• /
• pp.56-65
• /
• 2022

The electrochemical corrosion properties of austenitic AISI 304 steel subjected to a long-term-aging heat treatment were investigated. AISI 304 steel was aged at 700 ℃ for up to 10,000 h. The variation in the microstructure of the aged specimens was observed by optical microscopy and scanning electron microscopy. Electrochemical polarization experiments were performed to obtain the corrosion current density (Icorr) and corrosion potential (Ecorr). Analyses indicated that the metastable intermetallic carbide M₂₃C₆ formed near the γ/γ grain boundary and coarsened with increasing aging time; meanwhile, the δ-ferrite decomposed into the σ phase and into M₂₃C₆ carbide. As the aging time increased, the current density increased, but the corrosion potential of the austenitic specimen remained high (at least 0.04 ㎛/cm²). Because intergranular carbide was absent, the austenitic annealed specimen exhibited the highest pitting resistance. Consequently, the corrosion resistance of austenitic AISI 304 steel decreased as the aging heat treatment time increased.

• Journal of Biosystems Engineering
• /
• 제40권2호
• /
• pp.124-136
• /
• 2015

Purpose: Grain quality is a general concept that covers many characteristics, ranging from physical to biochemical and physiochemical properties. Rice aging during storage is currently a challenge in the rice industry, and is a complicated process involving changes in all of the above properties. Spectroscopic techniques can be used to obtain information on the quality of rice samples in a non-destructive manner. Methods: The objective of this review was to highlight the factors that contribute to rice quality and aging, and to describe various spectroscopic modalities, particularly vibrational and hyperspectral imaging, for the assessment of rice quality. Results: Starch and protein are the main components of the rice endosperm, and are therefore key factors contributing to eating and cooking quality. While the overall starch, protein, and lipid content in the rice grain remains essentially unchanged during storage, structural changes do occur. These changes affect pasting and gel properties, and ultimately the flavor of cooked rice. In addition, grain quality is significantly affected by growing and environmental conditions, such as water availability, temperature, fertilizer application, and salinity stress. These properties can be evaluated using spectroscopic techniques, and rice samples can be discriminated by using multivariate statistical analysis methods. Conclusion: Hyperspectral imaging and vibrational spectroscopy techniques have good potential for determining rice quality properties in a non-invasive manner, i.e., not requiring the introduction of instruments into the rice grain.

• Elastomers and Composites
• /
• 제35권3호
• /
• pp.173-179
• /
• 2000

3가지 대표적인 가황계인 conventional vulcanization(Conv), semi-efficient vulcanization (Semi-EV), efficient vulcanization(EV)방법을 카본블랙 충전 천연고무 배합고무에 대해 적용하고, 이들 가황계에 따른 가황특성, 인장특성, 동적 점탄성을 조사하였다. 또한 가황온도가 배합고무의 기계적 물성과 노화저항성에 미치는 영향도 조사하였다. Conv 가황계가 Semi-EV나 EV 가황계에 비해 가황속도는 낮았으나 최대 토오크는 높았다. 인장특성은 Conv 가황계가 Semi-EV나 EV 가황계에 비해 높은 모듈러스를 나타내었고, 파괴점에서의 인장강도는 유사한 반면 신장율은 낮았다. 가황온도 증가에 따라 경도, 모듈러스 및 인장강도는 감소하였고, 감소 정도는 EV나 Semi-EV 가황계가 Conv 가황계보다 낮았다. 또한 열노화에 대한 저항성은 EV 가황계가 Conv 가황계보다 월등히 우수하였다.

• 한국해양공학회지
• /
• 제23권3호
• /
• pp.40-45
• /
• 2009

With the increase in the annealing temperature, the volume fraction of austenite phase increased and the volume fraction of ferrite phase decreased. In compliance with the addition of N, not only the volume fraction of austenite phase was increased but also the austenite structure was made larger. Volume fraction of ${\sigma}$ phase was increased by decreasing of the volume fraction of ferrite phase, with the increase in the aging time and in compliance with the addition of N. As increasing in volume fraction of ${\sigma}$ phase, tensile strength and hardness increased, while elongation and impact value decreased. Elongation slowly decreased and impact value rapidly decreased at the early stage of aging. By the added N, tensile strength, elongation, hardness and impact value was increased.