• Structural Engineering and Mechanics
• /
• v.72 no.3
• /
• pp.339-354
• /
• 2019

Reusing building materials and concrete of old buildings can be a promising strategy for sustained development. In buildings, the performance of materials under elevated temperatures is of particular interest for determining fire resistance. In this study, the effect of pozzolan and aggregate type on properties of concrete exposed to fire was investigated. In doing so, nanosilica with cement-replacement levels of 0, 2, and 4% as well as silica fume and ultrafine fly ash with cement-replacement levels of 0, 7.5, and 15% were used to study effect of pozzolan type, and recycled refractory brick (RRB) fine aggregate replacing natural fine aggregate by 0 and 100% was utilized to explore effect of aggregate type. A total of 126 cubic concrete specimens were manufactured and then investigated in terms of compressive strength, ultrasonic pulse velocity, and weight loss at $23^{\circ}C$ and immediately after exposure to 400 and $800^{\circ}C$. Results show that replacing 100% of natural fine aggregate with recycled refectory brick fine aggregate in the concretes exposed to heat was desirable, in that it led to a mean compressive strength increase of above 25% at $800^{\circ}C$. In general, among the pozzolans used here, silica fume demonstrated the best performance in terms of retaining the compressive strength of heated concretes. The higher replacement level of silica fume and ultrafine fly ash pozzolans in the mixes containing RRB fine aggregate led to a greater weight loss rate, while the higher replacement level of nanosilica reduced the weight loss rate.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.501-504
• /
• 2006

Recently, the Ceramic Bricks are getting increased due to demolishing aged buildings. But, disposal of the waste ceramic bricks has been relied on just burying into the ground. Regardless they can be used with recycled thick aggregate. Therefore the range of this study includes the experiment of slump test, compression, strength test and stress-strain analysis to the concrete the recycled thick aggregate with made by ceramic bricks. The reducing method of fine aggregate will be reviewed stand on analysis of this experimental result.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.71-72
• /
• 2015

As this study is the one related to the ultra high strength concrete essentially used for high rise buildings, it has analyzed on the flowability of ultra high strength concrete according to the variation of coarse aggregate and fine aggregate. The coarse aggregate was planned as two types including Granite Aggregate (GA) and crushed coarse Limestone Aggregate (LA) while fine aggregate was planned as four types including Sea Sand (SS), Limestone Crushed Fine Aggregates (LFA), Electric Arc Furnace Oxidizing Slag Aggregates (EFA) and Crushed Sand (CS) to perform experiment with a total of eight variables. As a result of analyzing slump flow, 500mm concentration time, U-Box and L-Flow, etc. among the characteristics of fresh concrete, a mix using LA+LFA is determined to show high flowability in case of applying ultra high strength concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.489-494
• /
• 1998

This paper describes the possibility to reuse concrete waste produced by demolition of reinforced concrete structures as aggregate for concrete from the viewpoint of strength. Concrete rubble obtained from the demolished buildings at Taejon were crushing machine to reuse as coarse aggregate. The strength properties, such as compressive strength, splitting tensile strength, bending strength and shear strength, of recycled and normal concrete were examined and compared experimentally when water cement ratio was varied. From the results of this study, it was thought that in case of non-washed aggregate concrete, strength properties of recycled coarse aggregate is similar to that of normal concrete, In W/C 55%~45%, stress-strain curve of recycled concrete shows more stable than that of normal concrete, while in W/C 35%, it shows brittle behavior.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.203-204
• /
• 2023

Recycled aggregate is an aggregate that satisfies the quality as an aggregate by crushing waste concrete and passing it through a separator. The government grants a floor area ratio of up to 15% and building height mitigation when more than 25% of the recycled building materials are used. In addition to environmental protection issues, it is necessary to actively utilize recycled aggregates that meet the standards to secure the business feasibility of buildings. This study attempted to derive the results according to the substitution rate by measuring the chloride ion diffusion characteristics based on the electrophoresis method.

• Fire Science and Engineering
• /
• v.25 no.6
• /
• pp.8-13
• /
• 2011

High Strength Concrete (HSC) has a disadvantage of the brittle failure under fire due to the spalling. The studies on spalling control method of new constructed HSC buildings were performed enough, but the studies on existing buildings are insufficient. The new inorganic refractory mortar is developed in this study. The insulating capacity is enhanced by using light weight fine aggregate and polypropylene (PP) fiber. In results of material test, the thermal conductivity of light weight fine aggregate get lower than general fine aggregate. And in results of column test, the fire resisting time is delayed 20 minutes by using light weight fine aggregate, 10 minutes by increasing finishing depth from 10 mm to 20 mm and 4 minutes by using 0.6 % PP fiber.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.561-566
• /
• 1999

Due to recent demolition works of aged concrete bridges and buildings, a considerable amount of waste concrete material have been reclaimed without crushing works. It is well believed that waste concrete could be used for recycling good coarse aggregate, which could contribute to partly reduce environmental pollutions due to noise and dust by demolition works, and also to solve the shortage of natural aggregate for new concrete works. This experimental study is to investigate the flexural and shear behaviour of recycling RC beams with pertinent amount of recycling coarse aggregate, such as 30%, 50% and 100% of total aggregate volume. It is concluded from the test that structural behaviour of recycled concrete is determined to have similar behaviour of normal concrete.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.55-56
• /
• 2023

Recently, large and high-rise buildings are increasing, and accordingly, concrete weight reduction is required. Lightweight aggregate concrete can provide economic feasibility and large space, but safety can be reduced due to problems such as low strength and poor durability. Since the development of such low strength of concrete is important in the early construction stage, it is necessary to evaluate the vertical formwork demolding period at the early age. The correlation was analyzed by measuring the compressive strength and ultrasonic pulse velocity. As a result, the ultrasonic pulse rates of normal and lightweight aggregate concrete at the time of 5 MPa expression, which is the time of vertical mold deformation, were 3.07 km/s and 2.77 km/s for W/B 41, and 2.89 km/s and 2.73 km/s for W/B 33.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.565-570
• /
• 2001

Annually, Taiwan generates approximately 2 million tons of inorganic wastes in the form of sludge, fly ash and slug. To increase the added value of waste and maintain the increasingly insufficient supply of natural gravel, large public construction projects account for this large demand each year. future architectural trends are leading towards high-rise buildings. In light of the above, Center for Environmental, Safety and Health Technology Development, Industrial Technology Research Institute has developed the technology of manufacturing cold-bonding, sintering and bloating types of lightweight aggregates with a specific gravity ranging between 0.7~1.7, water absorption rate < 30%. The lightweight aggregate verified by physical property tests can be used as a substitute for the natural aggregate, which generally appears in replacing gravel in concrete, soundproofing and heat insulation materials. Doing so would not only moderate waste disposal problems, but also achieve the goal of resource recovery.

• Journal of Korean Society of Disaster and Security
• /
• v.7 no.2
• /
• pp.17-24
• /
• 2014

Recently, many accidents occur frequently because sprinklers aren't installed or don't work right when there are outbreak of fire in houses and aggregate buildings. Therefore, they can result in damage for humans and loss of property. Sprinklers are the most appropriate which can extinguish buildings' fire in the initial stages. Through lack of legal system, in domestic cases, sprinklers cannot operate their inherent performance. Domestic standard simply classifies installation objects according to types of business and forms of buildings, also divides into uses and floors of buildings. Especially it only regulates that sprinklers must be installed every floors in particular fire buildings that have more than eleven floors. While it doesn't need to install sprinklers below ten floors, so we are threatened the safety. In this study, we derived causes and implications by analyzing concepts of sprinklers facilities, installation standards in domestic and foreign legal system, and recent cases that expanded damages in fire accidents because of weak point of installation and control standards. In domestic cases, as a result, government has to provide an institutional strategy and law that regulate duty to install sprinklers to all aggregate buildings regardless of floors in terms of new buildings. Also, if someone who has existing buildings wanted to install them, government would guarantee subsidy to encourage installation. In addition, government supervises fire-fighting activities when there are fire by compensating standards about regular inspection by a qualified technician, operation and maintenance of sprinklers as well as reinforcement of administrative criteria.