• Elastomers and Composites
• /
• v.51 no.1
• /
• pp.24-30
• /
• 2016

Sole in the footwear usually modified with foaming agent on the polymer resin to improve the lightweightness and crush-cushion effect. In this study, we investigated rheological properties for polymer resin filled with the different type and concentration of foaming agent, capsule type foaming agent and organo-chemical foaming agent, under the time sweep test. Curing times of each polymer resin with different kind of foaming agent are delayed than reference material (epoxy resin with curing agent). In case of adding capsule type foaming agent, however, there is appropriate concentration to reduce the curing time, relatively. When foaming agent is activated, foaming force inflates the sample in contrast to condensation force of curing and then axial normal force develop to the (+) direction. Interestingly, by increase concentration of foaming agent, there is a specific point to break down the axial normal force development. The reason for this phenomenon is that coalescence of foams induce the blocking of axial normal force development.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.80-81
• /
• 2013

There is the increasing number of constructing soil or structure on the soft ground during public works. Usually cement or slag cement has been the traditional material for surface soil stabilization method. Recently, early strength development properties of hardening agent is required for driving abilities of execution equipment and shortening of the construction time. Therefore, the purpose of this study is to develop the early compressive strength hardening agent for surface soil stabilization. The study was confirmed performance and availability of hardening agent using early strength type cement and industrial by-product minerals through early strength development properties in accordance with water cement ratio, content of hardening agent for soft soil.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.998-1001
• /
• 2010

Most firming agent used in Korea is cement-firming agent. Cement-firming agent absorb water for combination, and then it makes ettringite. Through this chemical process, soft ground is firmed by cement-firming agent. Although most cement-firming agent used in Korea made from CSA, it relies on imports. Therefore, the development of soft ground firming agent using new materials is required. In this study, we suggested that EAF reduction slag not used for anything in the steel industry is available for material of soft ground firming agent. If EAF reduction slag is used in soft ground firming agent, it will be possible to solve the problem with treatment of slag and improvement of soft ground.

• The KIPS Transactions:PartD
• /
• v.11D no.1
• /
• pp.133-142
• /
• 2004

The next generation of web applications will need to be larger, more complex, and flexible Agent-oriented systems have great potential for these e-commerce applications. Agents can dynamically discover and compose e-services and mediate interactions. Development of software agents with CBD (Component Based Development) has proved to be successful in increasing speed to market of development Projects, lowering the development cost and providing better qualify. In this thesis, we propose a systemic development process for software agents using component and UML (Unified Modeling Language). We suggest a etA (e-business Agent) CBD reference architecture for layer the related components through identification and classification of general agent and e-business agent. We also propose the ebA-CBD process that is a guideline to consider the best features of existing agent oriented software engineering methodologies, while grounding agent-oriented concepts in the same underlying semantic framework used by UML. We first developed the agent components specification and modeled it with Goal, Role, Interaction, and Architecture Model. Based on this, we developed e-CPIMAS (e-Commerce Product Information Mailing Agent System) as a case study that provides the product information's mailing service according to proposed process formality. We finally describe how these concepts may assist in increasing the efficiency reusability, productivity and quality to develop the business application and e-business agent.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.10
• /
• pp.35-43
• /
• 2012

In this paper, a development of agent-based IEDs(Intelligent electronic devices) for integration control of building microgrid in smart green building are proposed. To manage and control this complex energy system of smart green buildings, multi-agent system based networks is needed. Thus, several IEDs for utilizing multi-agent system are developed and modified for the their verification of performance as agent modules functions in the integrated experimental equipment. The good performance of these IED agents are verified from experimental results obtained from seamless bi-directional communication by SOAP/XML protocol between PC agent and IED agent.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.663-668
• /
• 2002

In this paper, insulating effects and strength development of concrete placed at mock up model structure are discussed using anti freezing agent and insulating forms. According to test results, concrete containing 8% of anti freezing agent shows lower freezing temperature, earlier setting time and higher strength development than plain concrete. As for the temperature history of mock up structures, when plain concrete is placed at euro form, the temperature drops to -4${\circ}$ before early 24 hours, and when concrete containing anti freeze agent at euro form, it to -3${\circ}$ before early 24 hours. Nevertheless, when concrete containing anti freeze agent is placed at insulating form, it does not go below zero, and the concrete containing anti freeze agent enhances higher strength development.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.269-272
• /
• 2003

This study is intended to investigate the properties of concrete using AE Water Reducing Agent of Early-Strength Type. According to the results, as for the replacing method of mineral admixture, setting time is shortened faster in order of replacement for fine aggregate, combination and replacement for cement, and when AE Water Reducing Agent of Early-Strength Type is used, it is shortened by about 4 hours, compared with normal AE Water Reducing Agent Compressive strength is lower in the case of replacement for fine aggregate, but higher in the other case than that of plain concrete. And When AE Water Reducing Agent of Early-Strength Type is used, early compressive strength is very high in comparison to normal AE Water Reducing Agent. Early strength development is very favorable by the use of AE Water Reducing Agent of Early-Strength Type regardless of the replacing method of mineral admixture at $20^{\circ}C$, but at $l0^{\circ}C$, it is effective for Early strength development that W/B is lowered to below 45%, BS of 20% is replaced for fine aggregate, and AE Water Reducing Agent of Early-Strength Type is used.

• International Journal of Contents
• /
• v.3 no.1
• /
• pp.24-28
• /
• 2007

This paper embodies the agent based cinder monitoring system which supports PDA(Personal Digital Assistant). Monitoring system automatically manages data by using data managing agents such as a state managing agent, a location managing agent, a badness managing agent, a circumstances managing agent, etc, and uses a massive data processing agent to manage massive data. The development of agent based data monitoring system for the stable cinder reuse will be an epoch-making method to develop the process mechanized or manual-labored that widely spreads into the real-time automated process.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.12
• /
• pp.3548-3558
• /
• 1999

There are many kinds of multi-agent frameworks which support the high-level knowledge representation languages for providing intelligence to their agents. But, the agent programming interfaces of the frameworks require to use some general-purpose programming languages as well as tile knowledge representation languages. In general, knowledge representation languages and general-purpose programming languages are different in their levels and data representation models. The differences can make the problems about tile coupling of the elements which are necessary for developing intelligent agents. This paper describes a new type of intelligent agent shell INAS(INtelligent Agent Shell) version 2 which has developed to cope with the problems. Unlike the previous agent frameworks, INAS supports a high-level integrated agent building language for building intelligent agents by itself. Therefore, the development of intelligent agents by using INAS version 2 does not suffer from the problems of the previous agent frameworks. Through the development of several intelligent agents, we experienced that the agent building language of INAS version 2 could reduce the difficulties of developing intelligent agents.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.572-575
• /
• 2004

Since the 1990s, the advancement of semiconductor technology has resulted in the development of microprocessor technology, auxiliary computer technology, and application technology such as intelligent algorithms (neural network, fuzzy, etc.). These based the development of intelligent machines. An agent is autonomous software that recognizes environment, exchanges knowledge with other agents and makes decisions. We designed agent-based sensor structure. For the purpose, first, it modeled the function of an intelligent machine. Second, it designed sensory function on the agent level.