• 제목/요약/키워드: Ag alloy

검색결과 362건 처리시간 0.023초

급속응고한 Ag-Sn-In 미세조직에 미치는 Sn 함량 변화의 영향 (The Effect of the Sn Amounts on the Microstructure of Rapidly Solidified Ag-Sn-In Alloys)

  • 조대형;권기봉;남태운
    • 한국주조공학회지
    • /
    • 제26권2호
    • /
    • pp.92-97
    • /
    • 2006
  • Contact material is widely used as electrical parts. Ag-Cd alloy has a good wear resistance and stable contact resistance. But the disadvantages of Ag-Cd alloy are coarse Cd oxides and harmful metal, Cd. To solve the disadvantages of that, Ag-Sn alloy that has stable and fine Sn oxide at high temperature has been developed. In order to optimize Sn amount that affects the formation of the oxide layer on the surface, we worked for the microstructures and properties of Ag-Sn material fabricated by rapid solidification process. The experimental procedure were melting using high frequency induction, melt spinning, and internal oxidation. We have shown that the optimized Sn amount for high hardness is 7.09 wt%Sn. Surface oxide layer forms when Sn amount is over 9.45 wt%. The size of Sn oxide is 20 nm.

상악 전부 무치악 환자에서 CAD/CAM 시스템으로 제작되는 Pd-Ag 합금을 이용한 고정성 임플란트 전악 수복 증례 (Maxillary cement retained implant supported fixed prosthesis using the millingable Pd-Ag alloy generated by CAD/CAM system: clinical report after two years in service)

  • 이준식;한세진;최유성
    • 구강회복응용과학지
    • /
    • 제30권1호
    • /
    • pp.71-80
    • /
    • 2014
  • 골흡수가 심한 환자에서 임플란트를 이용한 전악 수복의 경우 치은과 치아의 외형을 심미적이면서도 기능적으로 회복하기 위해서는 보철물 제작에 있어 신중을 기해야 한다. 이러한 전악 수복 증례에서 CAD/CAM 시스템이 높은 정확성을 가지는 보철물 제작을 가능하게 함으로써 사용이 증가하고 있다. 최근에 임상에서 티타늄이나 지르코니아의 단점을 보완하면서 높은 생체적합성을 가지고 CAD/CAM 시스템으로 제작할 수 있는 팔라듐-은(Pd-Ag) 합금이 개발되어 사용되고 있다. 본 증례에서는 상악 전부 무치악 환자에서 임플란트를 식립하고 도재의 chipping이나 파절의 위험을 감소시키기 위해 Pd-Ag 합금을 이용해 제작된 임플란트 고정성 보철물로 수복한 환자에 대해 보고하고자 한다.

저융점 합금(Bi58Sn42)을 이용한 Metal Mesh Touch Sensor용 Ag 페이스트의 전기적 특성 (Electrical Characteristics of the Ag Past with addition of Low-melting Alloy of Bi58Sn42 for Metal Mesh Touch Sensors)

  • 김태형;허영우;김정주;이준형
    • 한국표면공학회지
    • /
    • 제50권6호
    • /
    • pp.510-515
    • /
    • 2017
  • In this study, a transient liquid phase sintering (TLPS) process of Ag pastes mixed with a fusible metal alloy of Bi58Sn42 with the melting temperature of $138^{\circ}C$, was examined. After screen printing of the Ag pastes with and without Bi58Sn42 powders on polyimide (PI) substrates, the electrodes were heat-treated at different temperatures in the range between 150 and $300^{\circ}C$ for 60 min in air. Comparing the electrical conductivity of the Ag pastes with and without Bi58Sn42 alloy powder after the heat treatment, it was manifested that the low melting temperature alloy definitely played a major role in an increased conductivity when it is added into the Ag pastes by providing more electrical conduction paths between Ag particles. This can be explained by the fact that capillary force of the melts of Bi58Sn42 can contribute to the rearrangement of the Ag particles during the heat-treatment inducing better connectivity between the Ag particles.

Ag 함유량에 따른 Sn-Ag-Cu 솔더의 Solderability 및 반응 특성 변화 (Solderability Evaluation and Reaction Properties of Sn-Ag-Cu Solders with Different Ag Content)

  • 유아미;이종현;강남현;김정한;김목순
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2006년 추계학술발표대회 개요집
    • /
    • pp.169-171
    • /
    • 2006
  • Solderability and reaction properties were investigated for four Pb-free alloys as a function of Ag contents; Sn-4.0Ag-0.5Cu, Sn-3.0Ag-0.5Cu, Sn-2.5Ag-0.5Cu, and Sn-1.0Ag-0.5Cu. The alloy of the lowest Ag content, i.e., Sn-1.0Ag-0.5Cu, showed poor wetting properties as the reaction temperature decreased to 230oC. Variation of Ag concentration in the Sn-xAg-0.5Cu alloy shifted exothermic peaks indicating the undercooling temperature in DSC curve. For the aging process at 170oC, the thickness of IMCs at the board-side solder/Cu interface increased with the Ag concentration.

  • PDF

관교의치 및 금속 도재 보철물용 Ni-Cr 합금과 Ag-Pd 합금의 재사용에 따른 주조 재현성의 변화 (Castability of Some Repeatedly Used Ni-Cr Alloys and Ag-Pd Alloys for Crown and Bridge and Metal-Ceramic Restorations)

  • 김웅철
    • 대한치과기공학회지
    • /
    • 제8권1호
    • /
    • pp.37-43
    • /
    • 1986
  • The purpose of this study is to evalute the effects of melting and casting procedures on the castability of some N-Cr and Ag-Pd alloys. One Ag-Pd alloy and two Ni-Cr alloys were chosen for study, and the first casting group of these alloys were used as the control, and with which the castability of the first recase group and the mixture group of the first recast and as much amount of the first casting alloy was compared. The results of this study were as follows: 1. The castability of the first recast alloys veried significantly depending upon the presence or abscence of the first casting alloy and the kind of alloys. 2. When the first recast alloy was mixed with as much amount of the first casting alloy, there was no significant difference in castabilityh between the first recast group and the first casting group. 3. When the first recast alloy was used alone, the castability veried significantly depending upon the kind of alloys, i.e., the castability of Rexillium III and Palliag M was decreased significantly when compared with that of the first casting groups, while that of C & B Alloy was not.

  • PDF

은 합금 시스 Bi-2223 고온초전도 테이프의 임계전류밀도 향상 (Improvement of Jc for Ag alloy Sheathed Bi-2223 HTSC Tape)

  • 장현만;오상수;하동우;류강식;김상현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1996년도 하계학술대회 논문집 C
    • /
    • pp.1489-1491
    • /
    • 1996
  • The effect of Ag alloy sheath have been investigated in terns of critical current density and mechanical property. Nevertheless the continuous improvement of critical current density($J_c$) of Ag sheathed Bi2223 oxide superconducting wire processed with powder in tube(PIT) method, poor mechanical strength is still considered to be demerits for power application. In this study, we prepared two kinds of Ag- x wt% Cu alloy and pure Ag sheathed Bi2223 superconducting tapes. The hardness and tensile strength of prepared tapes has been measured. Their mechanical propertes were improved by Ag alloying.

  • PDF

화학환원법을 이용한 Ag-Pd 합금 나노분말의 합성 (Synthesis of Ag-Pd Alloy Nanoparticles by Chemical Reduction Method)

  • 서원식;김윤도;정일엽;이호석;송기창
    • 한국세라믹학회지
    • /
    • 제43권4호
    • /
    • pp.224-229
    • /
    • 2006
  • Ag-Pd alloy nanoparticles were prepared by a chemical reduction method using hydrazine $(N_2H_4)$ as a reductant in $AgNO_3\;and\;Pd(NO_3)_2$ aqueous solutions. Characterization of these particles by X-ray powder diffraction revealed a bimetallic and crystalline silver-palladium alloy. The average size of the particles was influenced not by the reductant $(N_2H_4)$ concentration, but the concentration of the starting materials $(AgNO_3\;and\;Pd(NO_3)_2)$.

Enhancement of light reflectance and thermal stability in Ag-Mg alloy contacts on p-type GaN

  • 송양희;손준호;김범준;정관호;이종람
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 춘계학술회의 초록집
    • /
    • pp.18-20
    • /
    • 2010
  • 수조구조의 InGaN LED 소자에 적용이 가능하며 높은 열적안정성을 갖는 저저항 고반사율 p형 오믹 전극을 개발하였다. Ag에 Mg을 첨가하여 p형 전극을 이용하여 $400^{\circ}C$, 공기중에서 1분간 열처리 후 $2.2\;{\times}\;10^{-5}\;{\Omega}cm^2$의 낮은 접촉 저항을 얻을 수 있었고, 460 nm 파장에서 82.6%의 높은 반사율을 획득할 수 있었다. 이는 Mg가 첨가됨에 따라 Ag가 고온에서 집괴되는 원인인 산소-공공 결합을 줄여줌으로써 높은 열적 안정성을 얻게 되었다. Ag를 열처리 할 경우, 외부에 존재하는 산소가 공공 자리에 들어간 후, 산소와 공공의 강한 인력에 의해 산소가 침입형 자리에 들어가서면서 두개의 공공과 강하게 bonding을 갖는 diffusion center가 많이 존재하게 된다. 하지만 Mg가 첨가되었을 경우, Oxygen affinity가 강한 Mg에 산소가 먼저 결합을 이루면서 산소-공공결합을 줄여주게 되어 높은 온도에서도 diffusion이 이루어지지 않고 높은 열적 안정성을 갖게 된다.

  • PDF

Co - Ag 합금박막의 거대자기저항 및 강자성 상하지층의 효과 (Giant Magnetoresistance Behavior and the Effect of Ferromagnetic Layer on the Co-Ag Nano-granular Alloy Films)

  • 김용혁;이성래
    • 한국자기학회지
    • /
    • 제7권1호
    • /
    • pp.31-37
    • /
    • 1997
  • 조성과 강자성 상하지층이 Co-Ag 나노입상 합금박막의 거대자기저항과 포화자기장에 미치는 효과에 대하여 연구하였다. 두께 3000 .angs. , 30 at.% Co 조성의 증착된 상태의 합금박막에서 23 %의 최대 자기저항비를 얻었으며 포화자기장은 2.3 kOe 였다. 두께 .angs.의 $Co_{30}$Ag$_{70}$ 합금박막의 자기저항비는 3.65 %, 포화자기장은 3.0 kOe 이었으며 200 .angs. 의 Fe를 상하지층으로 증착하였을 때 자기저항비는 3.3%, 포화자기장은 1.23 kOe로 감소하였다. 강자성 상하지층이 교환결합에 의하여 합금박막의 포화자기장을 감소 시키는 효과가 있었으며 그 효과는 합금박막의 두께가 약 3000 .angs. 이하에서 나타났다. 교환결합 강자성체 인 Co, NiFe, 그리고 Fe중에서 포화자 기장 감소에 가장 효과적인 재료는 Fe 이었다.다.

  • PDF

아말감과 이종(異種)금속의 거리에 따른 부식에 대한 고찰 (A Study on Corrosion according to Distance between Amalgam and Dissimilar Metals)

  • 김주원;정은경
    • 치위생과학회지
    • /
    • 제4권3호
    • /
    • pp.103-109
    • /
    • 2004
  • 본 실험은 제조회사 매뉴얼과 통법에 의해서 Amalgam 합금, Ni-Cr alloy의 Crown용 Verabond, Denture용 Talladium $^{TM}alloy$로 각각 24개의 총 72의 시편을 하악 제1대구치근 원심 치관 폭경과 임상에서의 MOD cavity를 고려하여 제작하였고 인공 타액 80ml를 담은 200ml 용 비이커에 시편을 넣어 0mm, 7mm, 40mm 거리에서 7일 후 갈바닉 부식을 측정하였다. 유리금속은 유도 플라즈마 방출 분광기(Inductively Coupled Plasma - Atomic Emission Spectrometer(ICP-AES, JY-50P, VG Elemental Co. France)로 전해액내의 Cu, Ag, Ni, Cr, Sn, Zn, Hg를 정량 분석했으며 그 결과 다음과 같은 결론을 얻었다. 첫째, Cu, Sn, Ag, Hg, Zn은 아말감이 금 합금과 접촉했을 때가 크라운용 Ni-Cr alloy와 덴쳐용 Talladium alloy 보다 아주 많이 유리 했으며 금 합금이 구강조직과 생체 적합성이 가장 좋다지만 아말감과 함께 있을 때 가장 불리 했슴을 알 수 있었다. 둘째, 아말감이 금 합금과 접촉했을 때, 금 합금의 조성에서 Ni, Cr 같은 중금속이 함유되지 않았기 때문인지 전혀 유리되지 않았으나 Sn은 조성에는 없었지만 $227.1{\pm}18.0035{\mu}g/cm^2$나 유리 되었고 Hg도 유리되었는데 이는 아말감 자체의 유리 물질임을 추측할 수 있었다. 셋째, 아말감 합금과 금 합금 사이에서의 0mm, 7mm, 40mm 거리에서는 Cu, Ag는 유의성이 있었으며 Hg는 유의성이 없었다. 이는 금합금은 절대 아말감과 같이 사용해서 안되며 이종 보철물 사이의 거리에 관계없이 사용을 금해야 하는 것으로 사료된다. 넷째, 아말감합금이 Crown용 Ni-Cr 합금과 접촉했을 때 아말감의 Ag이 유리 되지 않았으며 Zn, Ni, Sn, Hg, Cu의 순으로 유리되었다. 0mm, 7mm, 40mm 거리에 따라서 유의성이 있었다. Hg는 유리 되지 않았지만 중금속인 Ni, Cr은 유리되었고 반대 악궁이나 거리가 떨어져 있으면 접촉보다 Hg의 유리가 적었다. 다섯째, 아말감합금이 Denture용 Talladium alloy 합금과 접촉했을 때 0mm, 7mm, 40mm 거리에서도 유의성이 있었다. 0mm, 7mm, 40mm 거리에 따라서 유의성이 있었다. Hg는 유리 되지 않았지만 중금속인 Ni, Cr은 유리되었고 반대 악궁이나 거리가 떨어져 있으면 접촉보다 Hg의 유리가 적었다. 여섯째, 인공 타액에서 접촉 시 Amalgam alloy와 Gold, Verabond, Talladium alloy의 Cu, Sn, Ag, Hg, Zn, Ni, Cr의 ICPES 검사 결과 Cu, Hg가 유의성을 있었다. 일곱째, 인공타액에서 아말감합금과 두 비귀금속인 Ni-Cr alloy(crown용), Denture용 Talladium alloy가 접촉한 경우 거리에 따른 Hg, Ni, Cr의 유리 부산물에서 유의성을 확인했다.

  • PDF