• 한국전기전자재료학회논문지
• /
• 제26권3호
• /
• pp.246-251
• /
• 2013

Screen printing is commonly used to form the front/back electrodes in silicon solar cell. But it has caused high resistance and low aspect ratio, resulting in decreased conversion efficiency in solar cell. Recently the plating method has been combined with screen-printed c-Si solar cell to reduce the resistance and improve the aspect ratio. In this paper, we investigated the effect of light induced silver plating with screen-printed c-Si solar cells and compared their electrical properties. All wafers were textured, doped, and coated with anti-reflection layer. The metallization process was carried out with screen-printing, followed by co-fired. Then we performed light induced Ag plating by changing the plating time in the range of 20 sec~5min with/without external light. For comparison, we measured the light I-V characteristics and electrode width by optical microscope. During plating, silver ions fill the porous structure established in rapid silver particle sintering during co-firing step, which results in resistance decrease and efficiency improvement. The plating rate was increased in presence of light lamp, resulting in widening the electrode with and reducing the short-circuit current by shadowing loss. With the optimized plating condition, the conversion efficiency of solar cells was increased by 0.4% due to decreased series resistance. Finally we obtained the short-circuit current of 8.66 A, open-circuit voltage of 0.632 V, fill factor of 78.2%, and efficiency of 17.8% on a silicon solar cell.

• 한국재료학회지
• /
• 제16권11호
• /
• pp.692-697
• /
• 2006

Deodorization of natural zeolites have been improved not only for polar but also for non-polar pollutants by sucessive ion exchanges of H and Ag ions starting from Korean natural zeolite with high adsorption capacity. The modified zeolites with $TiO_2$ coating on the surface revealed high deodorization and photocatalytic decomposition effects. Further modification was made with $10{\sim}20nm$ silica nano particles coating on the surface, the resulting composite particles of $SiO_2/TiO_2/modified$ natural zeolite revealed not only comparable deodorization but also better durability and resisatnce to color change compared to the $TiO_2$/modified natural zeolite without much compensation of photocatalytic decomposition effect, when the composite particles were exposed to the polypropylene non-woven fiber coated with organic binder. It is expected for the composite particle prepared here to be used as indoor building materials for indoor air quality control.

• 산업기술연구
• /
• 제39권1호
• /
• pp.15-19
• /
• 2019

This work focused on characterization of the starch degradation activity from extremophile strain Deinococcus geothermalis. Glucoamylase gene from D. geothermalis was cloned and overexpressed by pET-21a vector using E. coli BL21 (DE3). In order to characterize starch degrading activity of recombinant glucoamylase, enzyme was purified using HisPur Ni-NTA column. The recombinant glucoamylase from D. geothermalis exhibited the optimum temperature as $45^{\circ}C$ for starch degradation activity. And highly acido-stable starch degrading activity was shown at pH 2. For further optimization of starch degrading activity with metal ion, various metal ions ($AgCl_2$, $HgCl_2$, $MnSO_4{\cdot}4H_2O$, $CoCl_2{\cdot}6H_2O$, $MgSO_4$, $ZnSO_4{\cdot}7H_2O$, $K_2SO_4$, $FeCl_2{\cdot}4H_2O$, NaCl, or $CuSO_4$) were added for enzyme reaction. As results, it was found that $FeCl_2{\cdot}4H_2O$ or $MnSO_4{\cdot}4H_2O$ addition resulted in 17% and 9% improved starch degrading activity, respectively. The recombinant glucoamylase from D. geothermalis might be used for simultaneous saccharification and fermentation (SSF) process at high acidic conditions.

• 대한환경공학회지
• /
• 제35권4호
• /
• pp.247-256
• /
• 2013

본 연구에서는 페놀계 화합물의 산화-변환 반응매개체로 알려진 버네사이트를 고정화한 알긴산 겔 비드(birnessite entrapped alginate beads, Bir-AB)를 제조하고, 1-naphthol (1-NP)의 제거반응 특성을 회분식 실험을 통하여 조사하였다. SEM (Scanning Electron Microscopy)분석 결과, 버네사이트 입자는 알긴산 겔을 가교로 하여 비드에 고정화됨을 확인하였다. Bir-AB에 의한 1-NP의 제거는 유사일차 속도반응(pseudo-first order kinetic)을 따랐으며, 반응속도상수(k)는 알긴산(AG)에 대한 버네사이트(Bir) 입자의 혼합비(Bir : AG=0.25 : 1~1 : 1 w/w)가 2배 증가할 때마다 약 1.5배씩 증가하였다. Bir-AB에 의한 1-NP 제거는 pH의 영향을 받았으며 pH가 10에서 4로 감소하면서 반응속도 상수(k, $hr^{-1}$)는 0.361에서 0.661로 약 1.8배 증가하였다. 반응상등액에 대한 총유기탄소(TOC) 분석결과 Bir-AB는 버네사이트 분말입자를 사용한 경우에 비교해 상대적으로 높은 용존 유기탄소 제거 효과(74% vs 92%)를 보였으며, 반응 후 분리한 비드에 대한 탈착실험(CH3OH)과 HPLC 크로마토그램 분석 결과로부터 1-NP의 중합체 생성물은 Bir-AB에의 고정화를 통해 수용액으로부터 제거될 수 있음을 확인하였다. 또한, 반응상등액에 대한 원자흡광분석(AAS) 분석결과 반응과정에서 용출되는 Mn이온은 Bir-AB에의 재흡착을 통해 제거되었다. Bir-AB는 간단한 여과를 통해 모두 회수가능하며, 2회 재사용에 따른 1-NP의 제거효율을 평가한 결과, 초기에 비교한 큰 반응성의 감소(제거율<20%) 없이 재사용이 가능한 것으로 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.188.1-188.1
• /
• 2015

For present investigation Fe/MgO/Fe/Co multilayer stack is grown on Si substrate using e-beam evaporation in ultrahigh vacuum. This stack is irradiated perpendicularly by 120 MeV $Ag^{8+}$ at different fluences ranging from $1{\times}10^{11}$ to $1{\times}10^{13}ions/cm^2$ in high vacuum using 15UD Pelletron Accelerator at Inter University Accelerator Centre, New Delhi. Magnetic measurements carried out on pre and post irradiated stacks show significant changes in the shape of perpendicular hysteresis which is relevant with previous observation of re-orientation of magnetic moment along the direction of ion trajectory. However increase in plane squareness may be due to the modification of interface structure of stacks. X-ray reflectivity measurements show onset of interface roughness and interface mixing. X-ray diffraction measurements carried out using synchrotron radiation shows amorphous nature of MgO and Co layer in the stack. Peak corresponding body centered Fe [JCPDS-06-0696] is observed in X-ray diffraction pattern of pre and post irradiated stacks. Peak broadening shows granular nature of Fe layer. Estimated crystallite size is $22{\pm}1nm$ for pre-irradiated stack. Crystallite size first increases with irradiation then decreases. Structural quality of these stacks was further studied using transmission electron microscopic measurements. Thickness from these measurements are 54, 36, 23, 58 and 3 nm respectively for MgO, Fe, MgO, Fe+Co and Au layers in the stack. These measurements envisage poor crystallinity of different layers. Interfaces are not clear which indicate mixing at interface. With increase fluence mixing and diffusion was increased in the stack. X-ray absorption spectroscopic measurements carried out on these stacks show changes of Fe valence state after irradiation along with change of O(2p)-metal (3d) hybridized state. Valence state change predicts oxide formation at interface which causes enhanced in-plane magnetization.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제12권2호
• /
• pp.55-64
• /
• 2007

생활 폐기물 매립장 침출수에 의해 오염된 지하수에 포함되어 있는 유기산($C_1-C_6$ aliphatic carboxylic acids)들의 정량 분석을 위해서 짧은 분석시간 안에 무기 음이온 뿐만 아니라 유기산까지 정량이 가능한 ion-exchange chromatography를 이용하여 침출수에 용존되어 있는 유기산을 정성 정량하였고, 검출된 유기산의 특성을 평가하였다. 분석 과정에서 $Cl^$, $Br^-$ 등의 halide 이온들의 유기산에 대한 피크 간섭을 줄이기 위해서 이들을 제거하는 전처리를 시료 주입 전에 적용하였다. 음이온 분석과 동일한 분석조건에서 음이온의 간섭을 최소화 하면서 정량이 가능한 유기산들을 선별하였고, 이들 유기산 중에서 음이온의 간섭을 받지 않는 fomate, acetate, propionate, pyruvate, succinate, oxalate에 대해서 정량 분석을 실시하였다. 본 실험에 사용된 유기산의 linear dynamic range는 0.5 mg/L에서부터 20 mg/L까지로 결정하였다. 이 분석법을 쓰레기 매립지 침출수와 주변 지하수에 대해 용존된 유기산과 무기 이온의 정량에 적용하여 높은 농도의 pyruvate와 낮은 수준의 formate와 acetate가 검출되었다. 지하수의 pyruvate 농도는 $Cl^-$, $HCO_3^-$ 농도와 높은 상관성을 보이고, 매립지에서 멀어질수록 농도가 감소하여, pyruvate는 매립지 침출수로부터 유래되었다고 추정되었다.

• 한국대기환경학회지
• /
• 제24권4호
• /
• pp.439-454
• /
• 2008

The purpose of this study was to extensively identify $PM_{10}$ sources and to estimate their contributions to the study area, based on the analysis of the $PM_{10}$ mass concentration and the associated inorganic elements, ions, and total carbon. The contribution of $PM_{10}$ sources was estimated by applying a receptor method because identifying air emission sources were effective way to control the ambient air quality. $PM_{10}$ particles were collected from May to November 2007 in the Yongin-Suwon bordering area. $PM_{10}$ samples were collected on quartz filters by a $PM_{10}$ high-volume air sampler. The inorganic elements (Al, Mn, V, Cr, Fe, Ni, Cu, Zn, Cd, Pb, Si, Ba, Ti and Ag) were analyzed by an ICP-AES after proper pre-treatments of each sample. The ionic components of these $PM_{10}$ samples ($Cl^_$, $NO_3^-$, $SO_4^{2-}$, $Na^+$, $NH_4^+$, $K^+$, $Ca^{2+}$, and $Mg^{2+}$) were analyzed by an IC. The carbon components (OC1, OC2, OC3, OC4, OP, EC1, EC2 and EC3) were also analyzed by DRI/OGC analyzer. Source apportionment of $PM_{10}$ was performed using a positive matrix factorization (PMF) model. After performing PMF modeling, a total of 8 sources were identified and their contribution were estimated. Contributions from each emission source were as follows: 13.8% from oil combustion and industrial related source, 25.4% from soil source, 22.1% from secondary sulfate, 12.3% from secondary nitrate, 17.7% from auto emission including diesel (12.1%) and gasoline (5.6%), 3.1% from waste incineration and 5.6% from Na-rich source. This study provides information on the major sources affecting air quality in the receptor site, and therefore it will help us maintain and manage the ambient air quality in the Yongin-Suwon bordering area by establishing reliable control strategies for the related sources.

• 한국대기환경학회지
• /
• 제29권1호
• /
• pp.74-85
• /
• 2013

Since the underground transportation system is a closed environment, indoor air quality problems may seriously affect many passengers' health. The purpose of this study was to understand $PM_{10}$ characteristics in the underground air environment and further to quantitatively estimate $PM_{10}$ source contributions in a Seoul Metropolitan subway station. The $PM_{10}$ was intensively collected on various filters with $PM_{10}$ aerosol samplers to obtain sufficient samples for its chemical analysis. Sampling was carried out in the M station on the Line-4 from April 21 to 28, July 13 to 21, and October 11 to 19 in the year of 2010 and January 11 to 17 in the year of 2011. The aerosol filter samples were then analyzed for metals, water soluble ions, and carbon components. The 29 chemical species (OC1, OC2, OC3, OC4, CC, PC, EC, Ag, Al, Ba, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Si, Ti, V, Zn, $Cl^-$, $NO_3{^-}$, $SO_4{^{2-}}$, $Na^+$, $NH_4{^+}$, $K^+$, $Mg^{2+}$, $Ca^{2+}$) were analyzed by using ICP-AES, IC, and TOR after proper pretreatments of each sample filter. Based on the chemical information, positive matrix factorization (PMF) model was applied to identify the $PM_{10}$ sources and then six sources such as biomass burning, outdoor, vehicle, soil and road dust, secondary aerosol, ferrous, and brakewear related source were classified. The contributions rate of their sources in tunnel are 4.0%, 5.8%, 1.6%, 17.9%, 13.8% and 56.9% in order.

• Bulletin of the Korean Chemical Society
• /
• 제21권11호
• /
• pp.1125-1132
• /
• 2000

The pH effect of the precursor solution on the preparation of $LiCoO_2$ by a solution phase reaction containing malonic acid was carried out. Layered $LiCoO_2$ powders were obtained with the precursors prepared at the different pHs (4, 7, and 9) and heat-treated at $700^{\circ}C(LiCoO_2-700)$ or $850^{\circ}C(LiCoO_2-850)$ in air. pHs of the media for precursor synthesis affects the charge/discharge and electrochemical properties of the $LiCoO_2electrodes.$ Upon irrespective of pH of the precursor media, X-ray diffraction spectra recorded for $LiCoO_2-850$ powder showed higher peak intensity ratio of I(003)/I(104) than that of $LiCoO_2-700$, since the better crystallization of the former crystallized better. However, $LiCoO_2$ synthesized at pH 4 displayed an abnormal higher intensity ratio of I(003)/I(104) than those synthesized at pH 7 and 9. The surface morphology of the $LiCoO_2-850$ powders was rougher and more irregular than that of $LiCoO_2-700$ made from the precursor synthesized at pH 7 and 9. The $LiCoO_2electrodes$ prepared with the precursors synthesized at pH 7 and 9 showed a better electrochemical and charge/discharge characteristics. From the AC impedance spectroscopic experiments for the electrode made from the precursor prepared in pH 7, the chemical diffusivity of Li ions (DLi+) in $Li0.58CoO_2determined$ was 2.7 ${\times}$10-8 $cm^2s-1$. A cell composed of the $LiCoO_2-700$ cathode prepared in pH 7 with Lithium metal anode reveals an initial discharge specific capacity of 119.8 mAhg-1 at a current density of 10.0 mAg-1 between 3.5 V and 4.3 V. The full-cell composed with $LiCoO_2-700$ cathode prepared in pH 7 and the Mesocarbon Pitch-based Carbon Fiber (MPCF) anode separated by a Cellgard 2400 membrane showed a good cycleability. In addition, it was operated over 100 charge/discharge cycles and displayed an average reversible capacity of nearly 130 mAhg-1.

• 생명과학회지
• /
• 제18권6호
• /
• pp.789-795
• /
• 2008

어류 질병 치료를 위한 probiont의 개발에 목적을 두고 어병균 Vibrio anguillarum NCMB1의 생육에 저해물질을 생산하는 Bacillus amyloliquefaciens H41균주를 분리하고 이 물질의 특성을 규명하기 위하여 정제를 시행하였다. 분리 균을 배양한 배양 상등액을 70% 염석, 투석하여 조 효소액으로 제작하고 조 효소액을 DEAE-sephadex, A-50 ion exchange chromatography, sephadex G-200 gel filtration column chromatography을 통하여 정제하고 SDS-PAGE 를 통하여 단일밴드를 확인하고 최종 회수율 2.9%을 얻을 수 있었으며 40.8배의 정제된 V. anguillarum NCMB1 생육저해물질을 얻을 수 있었다. 정제된 저해물질은 저해정도에 따라 단위를 설정하여 활성을 측정하였으며, 분자량은 48 kDa 로 확인되었으며 정제물질의 활성을 위한 최적 반응 pH와 온도는 pH 7.5와 $30^{\circ}C$로 확인되었다. 금속이온의 효과에 있어서는 $CoCl_2$, $HgCl_2$, $ZnSO_4$, $AgNo_3$에서는 완전히 저해되는 양상을 나타내었고 $MgSO_4$, $MnSO_4$에서 미미한 효소활성의 증가를 나타내었다. 그리고 염에 관한 안정성은 일반 해수의 농도인 3%의 농도에서도 활성을 나타내는 것으로 확인되었다. 정제된 저해물질을 현재 상업적으로 사용하고 있는 화학처리제나 항생제와 함께 효율성을 비교 해 보았을 때 저해물질은 약 78%의 저해 활성을 나타내는 것을 알 수 있었고 항생제보다는 효율성이 낮았으나 독성검사를 위해 정제물질을 살아있는 어류에 투여하였으나 어떤 해수어도 폐사하지 않는 것으로 보아 어류 자체엔 독성을 나타내지 않는 물질로 나타났다. 따라서 B. amyloliquefaciens H41 균주가 생산하는 정제 물질이 V. anguillarum 생육에 저해물질로 작용하는 것으로 밝혀졌으며 친환경적인 특성을 가진 물질로 밝혀졌다.