• 한국전산유체공학회:학술대회논문집
• /
• 2008.08a
• /
• pp.76.1-76.1
• /
• 2008

• 한국전산유체공학회:학술대회논문집
• /
• 2007.10a
• /
• pp.111-114
• /
• 2007

Computational Fluid Dynamics (CFD) and the Finite Element Method (FEM) are used to perform aerodynamics analysis and structure analysis. For the fluid-structure interaction analysis, each technology should be considered as well. The process of aerodynamics-structure coupled analysis can be applied to various integrated analyses from many research fields. In this study, the aerodynamics-structure coupled analysis is performed for the missile at high angle of attack condition through the use of Computational Fluid Dynamics (CFD) and the Finite Element Method (FEM). For this purpose, the aerodynamics-structure coupled analyses procedure for the missile are established. The results of the integrated analysis are compared with rigid geometry of the missile and the effect of the deformation will be addressed.

• International Journal of Aerospace System Engineering
• /
• v.2 no.2
• /
• pp.62-66
• /
• 2015

The starting processes of the Ludwieg tube hypersonic quiet tunnel plays very important role in the achievement of the quiet flow in the test section, which could affect the confidence coefficient of the data in the hypersonic transition experimental investigations. Thus, numerical analysis on that processes could help to understanding the running mode of the Ludwieg tube quiet tunnel and the propagation principle of the expansion wave series. To verify our computational method, the same parameter of the BAM6QT (the Boeing/AFOSR Mach-6 quiet tunnel at Purdue University) is used to compute, and it is agrees with our computational results.

• International Journal of Aerospace System Engineering
• /
• v.2 no.2
• /
• pp.50-53
• /
• 2015

It would encounter some complicated flow fields, such as transition, separation, reattachment and disturbances, in the hypersonic flight. Thus, it is difficult to theoretically analyze the hypersonic aerothermodynamics effects, so that the ground-test simulation is thought of as one of the most important methods to improve the understanding level of the hypersonic aerothermodynamics. However, the aero-heating tests could not simulate all aerodynamics and geometry parameters in the real flight due to the differences between the experimental environments supplied by the ground facilities and the flight, so that the feasible technique for the ground-test simulation of the hypersonic aerothermodynamics effects is required to be advanced. The key parameters that are especially required to simulate for aero-heating tests are analyzed and one detailed approach is suggested to perform the experimental investigation on the hypersonic aero-heating effects in the ground facilities in this paper, and the tests are performed in the FD-20 gun tunnel of CAAA (China Academy of Aerospace Aerodynamics) to give out the data which could be used to confirm the equation from the theoretical analysis.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.356-359
• /
• 2004

Prelaunch thermal analysis of the KSLV (Korea Space Launch Vehicle)-I PLF (Payload Fairing) was performed to predict maximum/minimum liftoff temperatures and to evaluate of air conditioning performance. Prelaunch thermal analysis includes internal air conditioning effect, external convective heating/cooling, radiation exchange with the ground and sky, radiation between spacecraft and PLF, and solar radiation incident on PLF. Analysis was performed at two extreme conditions, hot day condition and cold day condition. The results showed that the maximum liftoff temperature was $53^{\circ}C$ and the minimum liftoff temperature was $-3.8^{\circ}C$. It was also found that conditioned air supplying, in $20{\pm}2^{\circ}C\;and\;1200\;m^3/hr$, is sufficient to keep the internal air in required temperature range.

• Journal of Aerospace System Engineering
• /
• v.4 no.2
• /
• pp.10-15
• /
• 2010

Aerodynamic noise is becoming the major source of annoyance for modern cars recently and is caused by many different noise sources in a car. Appropriate CFD technologies, therefore, have been developed to resolve the noise problems related with aerodynamics. It is necessary for designers to fully understand the relationship between vehicle aerodynamics and wind noise acoustics. In this study, we simulate the flow fields around two different shapes of side mirror models of passenger car and analyze the noise phenomena around one side mirror model that has lower drag than the other model using Fluent 6.3.

• Journal of Institute of Convergence Technology
• /
• v.7 no.1
• /
• pp.23-29
• /
• 2017

A pterosarus is an ancient flying reptile and the first vertebrate with powered flight. The shapes of the pretosarus'airfoil in the published literature are reconstructed. The aerodynamics of the Pterosarus is obtained using a free software XFOIL. The steady aerodynamics of the Pterosarus' airfoil are investigated focusing on the gliding performance. The numerical results are validated by comparing the computed aerodynamic coefficients with the measured data. The secretes of the Pterosarus' highly camberred airfoil are elucidated by comparing the aerodynamics with that of the birds'.

• Journal of Aerospace System Engineering
• /
• v.3 no.4
• /
• pp.1-6
• /
• 2009

Aerodynamic noise is becoming the major source of annoyance for modern cars recently and is caused by many different noise sources in a car. Appropriate CFD technologies, therefore, have been developed to resolve the noise problems related with aerodynamics. It is necessary for designers to fully understand the relationship between vehicle aerodynamics and wind noise acoustics. In this study, we simulate the flow fields around two different shapes of side mirror models of passenger car and analyze the noise phenomena around one side mirror model that has lower drag than the other model using Fluent 6.3.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.2
• /
• pp.115-124
• /
• 2015

A methodology is proposed to estimate a trajectory of a flying target and its velocity using the time and frequency analysis of the acoustic signal. The measurement of sound emitted from a flying acoustic source with a microphone above a ground shall receive both direct and ground-reflected sound waves. For certain frequency contents, the destructive interference happens in received signal waveform reflected path lengths are in multiple integers of direct path length. This phenomenon is referred to as the acoustical mirror effect and it can be observed in a spectrogram plot. The spectrogram of acoustic measurement for a flying vehicle measurement shows several orders of destructive interference curves. The first or second order of curve is used to find the best approximate path by using nonlinear least-square method. Simulated acoustic signal is generated for the condition of known geometric of a sensor and a source in flight. The estimation based on cepstrogram analysis provides more accurate estimate than spectrogram.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.4
• /
• pp.329-335
• /
• 2009

The unsteady panel and time-marching free wake are applied to the rotor aerodynamics and wake behaviour. Numerical results of panel and free wake are compared and validated with experimental data. Using these methods, unsteady rotor aerodynamics in BVI condition is analyzed and discussed in detail.