• Wind and Structures
• /
• 제35권6호
• /
• pp.405-418
• /
• 2022

The aerodynamic behaviour of a CRH high-speed train under three infrastructure scenarios (flat ground, embankment, and viaduct) in the presence of a crosswind was simulated using a 1/8th scaled train model with three cars and the IDDES framework. The time-averaged and instantaneous flow field around the model were examined. The employed numerical algorithm was verified through a wind tunnel test, and the grid and timestep resolution analyses were conducted to ensure the reliability of the data. It was noted that the flow around the rail line was different under different infrastructure scenarios, especially in the case of the embankment, which degraded the aerodynamic performance of the train under the crosswind. The flow around the train on the flat ground and viaduct was different, although the aerodynamic performance of the train was similar in both cases. Moreover, the viaduct accidents were noted to have the most critical consequences, thereby requiring the most attention. The aerodynamic performance of the train on the windward track of the embankment under the crosswind was worse than that of the train on the leeward track. But for the other two infrastructure scenarios, the aerodynamic performance of the train on the windward track is relatively dangerous, which is mainly caused by the head car. These observations suggest that the aerodynamic behaviour of the train on an embankment under a crosswind must be carefully considered and that certain wind protection measures must be adopted around rail lines in windy areas.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.492-497
• /
• 2011

일반적으로 헬리콥터는 양력, 추력 그리고 힘을 발생시키기 위해 로터 시스템을 사용하기 때문에 공력환경이 매우 복잡하다. 블레이드 와류 간섭과 같은 비정상 공력 환경이 발생한다. 이러한 비정상 공력 환경은 진동하중과 높은 공력소음을 유발한다. 진동하중과 공력소음은 로터 블레이드 회전수에 N 배의 해당하는 주파수 (N/rev)를 갖는다. 하지만 스와시 판과 피치링크로 이루어진 전통적인 로터 조종계통은 블레이드가 1 회 회전하는 동안 한번의 조종 변위를 발생시킬 수 있기 때문에 그러한 진동하중을 조절하기에는 한계가 있다. 이러한 문제를 해결하기 위해 많은 능동 제어 기법들이 개발되었다. 능동 제어기법은 임의의 주파수로 블레이드의 피치 각을 조종할 수 있다. 본 논문에서는 비정상 공력 하중을 변화시키기 위해 능동 제어기법 중 한 가지인 능동 뒷전 플랩 블레이드의 설계를 수행하였다. 능동 뒷전 플랩 블레이드는 에어포일의 캠버를 변화시키기 위해 작동기에 의해 구동되는 뒷전 플랩을 장착한다. 뒷전 플랩을 작동시키기 위해 블레이드 내부에 위치 압전 작동기를 사용하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 춘계 학술대회논문집
• /
• pp.79-82
• /
• 2007

The aerodynamic coefficients of Apollo capsule are calculated using a DSMC solver, SMILE, and the results agree very well with the data predicted by NASA. The aerodynamic characteristics of an orbital block which operates at high altitudes in the free molecule regime are also predicted. For the nominal flow conditions, the predicted aerodynamic force is very small since the dynamic pressure is extremely low. And the additional aerodynamic coefficients for the analysis of the attitude control are presented as the angle of attack and the side slip angle vary from $+45^{\circ}\;to\;-45^{\circ}$ of the nominal angle.

• 대한기계학회논문집A
• /
• 제35권1호
• /
• pp.59-65
• /
• 2011

블레이드와 바람의 상호작용에 의해 발생하는 풍력터빈의 공기역학적 토크와 파워의 특성은 매우 비선형적이다. 그러므로 풍력터빈의 전체 동적 거동은 풍속의 크기에 따라서 비선형적인 특성을 가진다. 공기역학적 비선형성은 또한 풍력터빈 제어시스템의 특성에 영향을 미치므로, 풍력터빈 제어기를 설계하기 위해서는 비선형적인 공기역학적 특성들에 대한 해석을 통한 고찰이 필연적이다. 본 논문에서는 정격파워 이상에서 풍속 크기에 따른 비선형적인 공기역학적 특성들과 이 비선형성들이 PI 제어기를 가지는 폐루프 피치계에 미치는 영향들을 1-질량 모델의 풍력터빈에 대하여 살펴본다.

• Journal of Mechanical Science and Technology
• /
• 제17권5호
• /
• pp.776-783
• /
• 2003

A low speed wind tunnel test was conducted for full-scale model of an unmanned aerial vehicle (UAV) in Korea Aerospace Research Institute (KARI) Low Speed Wind Tunnel(LSWT). The purpose of the presented paper is to illustrate the general aerodynamic and performance characteristics of the UAV that was designed and fabricated in KARI. Since the testing conditions were represented minor portions of the load-range of the external balance system, the repeatability tests were performed at various model configurations to confirm the reliability of measurements. Variations of drag-polar by adding model components such as tails, landing gear and test boom are shown, and longitudinal and lateral aerodynamic characteristics after changing control surfaces such as aileron, flap, elevator and rudder are also presented. To explore aerodynamic characteristics of an UAV with model components build-up and control surface deflections, lift curve slope, pitching moment variation with lift coefficients and drag-polar are examined. The discussed results might be useful to understand the general aerodynamic characteristics and drag pattern for the given UAV configuration.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.125.3-125
• /
• 2001

Recently, aircraft is designed to have high maneuverable at high angle of attack. However, it is very hard to obtain the accurate dynamic model for the high performance, because aerodynamic characteristics are nonlinear and include a lot of uncertainties. Therefore, nonlinear controller without considering uncertainties may degrade the control system performance. On this paper, to overcome these defects, the neural networks based adaptive nonlinear controller is proposed making use of the backstepping technique. Neural networks are implemented to guarantee robustness to uncertainties caused by aerodynamic coefficients variation. The main feature of the proposed controller is that the adaptive controller is developed under the assumption ...

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1863-1871
• /
• 2016

This paper presents an application of fractional order controller for the control of multi input multi output twin rotor aerodynamic system. Dynamics of the considered system are highly nonlinear and there exists a significant cross-coupling between the horizontal and vertical axes (pitch & yaw). In this paper, a fractional order model of twin rotor aerodynamic system is identified using input output data from nonlinear system. Based upon identified fractional order model, a fractional order PID controller is designed to control the angular position of level bar of twin rotor aerodynamic system. The parameters of controller are tuned using Nelder-Mead optimization and compared with particle swarm optimization techniques. Simulation results on the nonlinear model show a significant improvement in the performance of fractional order PID controller as compared to a classical PID controller.

• 대한기계학회논문집A
• /
• 제25권3호
• /
• pp.478-485
• /
• 2001

A dynamic load simulator(DLS) which can reproduce on-ground the aerodynamic hinge moment of control surface is an essential rig for the performance and stability test of aircraft actuation system. By setting up load actuator as counter acting with the control surface driving actuator and designing an appropriate force control system for load actuator, DLS can be mechanized. Obtaining an accurate mathematical model for the DLS is the first step to successfully design an aerodynamic load replicati on system. Two theoretical models are presented and tested for their validities with the experimental results, which turns out to be not successful. An alternative way of using system identification approaches in investigated to develop a good nominal model for DLS dynamics, and suitable uncertainty bounds for this nominal model are proposed with the consideration of experimental results.

• 한국군사과학기술학회지
• /
• 제9권2호
• /
• pp.143-151
• /
• 2006

This paper investigates effects of reaction control jet on the aerodynamic performance of generic interceptor missile operating at supersonic flight condition. Parallelized CFDS code is used as a viscous flow solver. The generic interceptor missile configuration composed of a long and slender body and fixed tail fins. The behavior of normal force, axial force and pitching moment characteristics at altitude conditions corresponding to 10 km is studied according to the given control jet conditions, different angle of attacks based on the analysis of aerodynamic characteristics.

• 한국항공우주학회지
• /
• 제35권5호
• /
• pp.375-380
• /
• 2007

연구에서는 주파수 영역 패널법을 이용하여 조종면이 있는 날개의 비선형 공력특성을 해석하였다. 날개의 비선형 공력특성을 해석하기 위해 반복적 캠버변형 기법을 도입하였다. 캠버변형 기법은 기지의 에어포일 공력특성을 이용하여 날개의 비선형 공력특성을 해석한다. 날개의 한 단면에서의 에어포일 캠버변형이 날개의 다른 단면에 미치는 영향은 다차원 뉴턴 반복법을 사용하여 고려하였다. 해석결과를 실험값과 비교하여 본 방법의 유효함을 보였다. 본 방법은 많은 계산 자원을 요하지 않으면서 신속하게 날개의 비선형 공력특성을 예측할 수 있어 항공기 설계 초기 단계에서 유용할 것으로 생각된다.