• 한국군사과학기술학회지
• /
• 제14권6호
• /
• pp.1207-1214
• /
• 2011

Design of 500W class UMGT(Ultra Micro Gas Turbine) for power generation is conducted. Basic design parameters are obtained by cycle analysis. Off-design performances are predicted by 1D aerodynamic design and 1D performance analysis of compressor and turbine. 3D impellers are designed and 3D performance analysis is carried out to predict the performance characteristics of UMGT. 1D and 3D performance analysis show similar results. Structure analysis is conducted to select materials. Titanium Alloy is proposed for structural stability.

• 한국항공우주학회지
• /
• 제46권6호
• /
• pp.496-502
• /
• 2018

본 연구에서는 이젝터의 주유동과 부유동의 모멘텀에 따라 형성되는 공기역학적 목에 관한 현상을 관찰하기 위하여 실험, 해석적 연구를 수행하였다. 상온 실험과 상용프로그램인 FLUENT를 이용한 해석을 통하여 주유동의 유량과 이젝터 실린더의 목 직경의 변화에 따른 성능으로 이젝터 성능의 주요 변수인 공기역학적 목의 평형구간을 관찰하였다. 결과적으로 기준 이젝터에서 유량비 변수는 0.33~1.167(탈설계/설계)의 범위, 실린더 목 직경 변수는 1~1.17(탈설계/설계 면적비)의 범위에서 성능 구현이 확인되었다.

• 대한토목학회논문집
• /
• 제30권1A호
• /
• pp.27-33
• /
• 2010

본 연구에서는 소형 풍력발전기를 교량에 설치하여 전력생산과 아울러 내풍안정성을 개선할 수 있는 방안을 연구하였다. 이를 위하여 기존 공기역학적 진동억제 대책과 유사하게 교량에 풍력발전기를 설치하기 위한 방법과 풍력에너지 추정 방법을 제시하였다. 풍동실험 결과를 보면, 페어링처럼 소형 풍력발전기를 설치하면 와류진동을 거의 억제할 수 있는 것으로 나타났고, 이때 교축방향 최적 이격 거리는 터빈 직경의 3-4.5배인 것으로 나타났다. 그리고 풍력발전기를 설치하면 항력계수는 낮아지고 양력계수의 기울기도 음에서 양의 값으로 바뀌어 전반적인 내풍안정성이 향상되는 것으로 나타났다. 한편 풍하측의 풍력발전기는 평균풍속이 낮아 발전을 못하지만, 풍상측의 풍력발전기는 상당량의 전기에너지를 생산하는 것으로 나타났다.

• 한국재난정보학회 논문집
• /
• 제12권3호
• /
• pp.242-248
• /
• 2016

본 논문은 GMA(SIS, Stylene Isoprene Stylene) 고분자계 수지를 기반으로 제조된 아스팔트 바인더를 사용하여 플랜트에서 제조하는 혼합물로 방수기능을 갖도록 성능을 개선한 신개념의 불투수성 아스팔트 포장의 연구를 위해 수행하였다. GMA 고분자 수지 기반의 아스팔트는 유연성과 탄성을 바탕으로 중차량의 충격에 의한 영향을 받지 않으며, 우수 시에 포트 홀의 발생과 소성변형 등 여름철 온도 변화에도 안정적이다. 새롭게 제안된 열가소성 폴리머를 사용한 아스팔트 포장재료는 방수기능은 물론 역학적 특성을 검증하기 위해 KS기준과 ASTM기준에 맞게 안정도, 흐름값, 공극률, 동적 안정도, 인장강도비, 미끄럼 저항성 실험을 하여 역학적 특성을 분석 하였다.

• 대한기계학회논문집B
• /
• 제33권8호
• /
• pp.580-588
• /
• 2009

This paper summarizes the experimentally-measured performance of small-scale, vertical-axis wind turbine for the purpose of improving the aerodynamic efficiency and its controllability. The turbine is designed to have a Savonius-Type rotor with an inlet guide-vane and an side guide-vane so that it achieves a higher efficiency than any lift- or drag-based turbines. The main design factors for this high-efficient, vertical wind turbine are the number of blades (Z), and the aspect ratio of Height/Diameter (H/D) among many. The basic model has the diameter of 580mm, the height of 464mm, and the blade number of 10. The maximum power coefficient of 0.50 was experimentally measured for the above-mentioned specifications. The inlet-guide vane ensures the maximum efficiency when the angle of attack to the rotor blade lies between $15^{\circ}$ and $20^{\circ}$. This experimental results for the vertical-axis wind turbine can be applied to the preliminary design of turbine output curve based on the wind characteristics at the proposed site by controlling its aerodynamic performance given as a priori.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.516-520
• /
• 2009

This study describes aerodynamic characteristics for the HAWT (Horizontal Axis Wind Turbine) rotor blade using general CFD(Computational Fluid Dynamics) code. The boundary conditions for analysis are validated with the experimental result by the NREL (National Renewable Energy Laboratory)/NASA Ames wind tunnel test for S809 airfoil. In the case of wind turbine rotor blade, complex phenomena are appeared such as flow separation and re-attachment. Those are handled by using a commercial flow analysis tool. The 2-equation k-$\omega$ SST turbulence model and transition model appear to be well suited for the prediction. The 3-dimensional phenomena in the HAWT rotor blade is simulated by a commercial 3-D aerodynamic analysis tool. Tip vortex geometry and Radial direction flows along the blade are checked by the analysis.

• 한국가시화정보학회지
• /
• 제10권1호
• /
• pp.27-33
• /
• 2012

This paper describes a new design of small-scale horizontal wind blade, called spiral wind turbine blade. Theoretical and numerical approaches on the prediction of aerodynamic performance of the blade have been conducted. A theoretical equation is successfully derived using the angular momentum equation to predict aerodynamic characteristics according to the design shape parameters of spiral blade. To be compared with the theoretical value, a numerical simulation using ANSYS CFX v12.1 is performed on the same design with the theoretical one. Large scale tip vortex is captured and graphically presented in this paper. The TSR-$C_p$ diagram shows a typical parabolic relation in which the maximum efficiency of the blade approximately 25% exists at TSR=2.5. The numerical simulation agrees well with that of the theoretical result except at the low rotational speed region of 0~20 rad/s.

• 한국가시화정보학회지
• /
• 제20권3호
• /
• pp.109-116
• /
• 2022

The optimized design of airfoils is essential to increase the performance and efficiency of wind turbines. The aerodynamic characteristics of airfoils near the stall show large deviation from experiments and numerical simulations. Hence, it is needed to perform repetitive analysis of various shapes near the stall. To overcome this, the artificial intelligence is used and combined with numerical simulations. In this study, three types of airfoils are chosen, which are S809, S822 and SD7062 used in wind turbines. A convolutional neural network model is proposed in the combination of VGG16 and U-Net. Learning data are constructed by extracting pressure fields and aerodynamic characteristics through numerical analysis of 2D shape. Based on these data, the pressure field and lift coefficient of untrained airfoils are predicted. As a result, even in untrained airfoils, the pressure field is accurately predicted with an error of within 0.04%.

• 제어로봇시스템학회논문지
• /
• 제11권11호
• /
• pp.963-969
• /
• 2005

An advanced method of Relaxed Static Stability (RSS) is utilized for improving the aerodynamic performance of modem version supersonic jet fighter aircraft. The flight control system utilizes RSS criteria in both longitudinal and lateral-directional axes to achieve performance enhancements and improve stability. The T-50 advanced trainer employs the RSS concept in order to improve the aerodynamic performance and the flight control law in order to guarantee aircraft stability, The T-50 longitudinal control laws employ the dynamic inversion and proportional-plus-integral control method. This paper details the design process of developing longitudinal control laws for the RSS aircraft, utilizing the requirement of MIL-F-8785C. In addition, This paper addresses the analysis of aircraft characteristics such as damping, natural frequency, gain and phase margin about state variables for longitudinal inner loop feedback design.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.91-98
• /
• 2000

Developed is a computer program for the prediction of the aero-acoustic performance characteristics such as discharge pressure, efficiency, power and noise level in the basic design step of axial flow fan. The flow field and the aerodynamic performance of fan are analyzed by using the streamline curvature computing scheme with total pressure loss and flow deviation models. Fan noise is assumed to be generated due to the pressure fluctuations induced by wake vortices of fan blades and to radiate via dipole distribution. The vortex-induced fluctuating pressure on blade surface is calculated by combining thin airfoil theory and the predicted flow field data. The predicted aerodynamic performances, sound pressure level and noise directivity patterns of fan by the present computer program are favorably compared with the test data of actual fan. Furthermore, the present computer program is shown to be very useful in optimizing design variables of fan with high efficiency and low noise level and in analyzing their design sensitivities.