• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.6
• /
• pp.759-766
• /
• 2018

Although the Act on the Prevention of Light Pollution Due to Artificial Lighting has been enforced since 2013, the area of advertisement lighting has made slow progress in solving the problems of light pollution. This paper first investigated institutional problems by analyzing domestic laws and regulations relating to the light pollution of advertisement lighting, and investigated and analyzed methods for reducing light pollution that were applied in overseas countries. Then, problems of light pollution were analyzed by conducting a research on the actual status of advertisement lightings installed in South Korea and applying various methods for reducing light pollution, and advertisement lighting using LED was recommended. As a method for reducing light pollution that can be applied to the process of manufacturing channel letter-type advertisement lights, power consumption per unit area ($W/m^2$) was proposed, and $100W/m^2$ was recommended as a value currently suitable for South Korea.

• KIEAE Journal
• /
• v.9 no.6
• /
• pp.65-72
• /
• 2009

Lighting for outdoor advertising is very common feature of building facades as they provide the information and commercial identification. As the interest of improving street beautification more widely, application of various lighting technologies has been develop for advertisement such as electric sign board and signage. Furthermore, the installation of higher sign luminance than needed has many negative consequences, including higher energy consumption and light pollution. There are now no standard for outdoor advertisements in terms of luminance, and installation of indiscreet outdoor advertisement without luminance consideration is becoming more commonplace. This study was to evaluate the luminous characteristics of outdoor advertising as a function of sign and building facade luminance, luminance ratio. Data were collected on 8 electric sign boards, 20 internally illuminated, externally illuminated, neon, and channel letter signs and 4 commercial areas. Photometric measurements were taken by CS-100(Minolta) and ProMetric-1400(Radiant Imaging) for various sign modes and sign design. Also luminance of building facades were analyzed according with CIE standard of maximum obtrusive light permitted for exterior lighting installations. The findings are as follows; (1) There were excessive luminance of electric sign boards that could affect adjacent building facade and night sky luminance. (2) Sings that are externally illuminated providing an inappropriate amount of light on to the outer surface of the sign caused higher building facade luminance and potential of unnecessary glare.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.3
• /
• pp.32-40
• /
• 2023

Recently, there are some outdoor floor advertising lighting devices as one of the active marketing methods. However, for outdoor use, there are many restrictions due to the Outdoor Advertisement Act, according to requiring high-output heat generation, waterproofing, and AC power, etc. The purpose of this study is to develop a Duo Light product optimized for indoor use through publicity and information guidance in normal times and automatic evacuation route guidance display in case of disaster, in conjunction with disaster safety. To that end, patent search and patent association analyses were conducted, and a comparative analysis with commercial products was conducted as a case study. In addition, prototypes were designed and produced through the review of operation principles, where field environment surveys and self-tests were conducted. Also, technology roadmaps were presented by preparing plans for expandability and advancement of products. For the analysis of technology commercialization, the feasibility of technology commercialization was examined through the analysis of Jolly's Model and Lean Canvas Model. The results of this study will be able to contribute to minimize human damage through the effective response to disasters, which can increase the effect of indoor advertising by using the proposed indoor floor advertising lighting device in advertising and disaster situations.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.506-511
• /
• 2017

LED lighting, which many companies are pursuing commercialization, is a representative green energy technology. However, the LED lighting for broadcasting image should have high output and easy portability compared with general LED lighting devices for street lamps, advertisement or transportation devices. Therefore, while shooting a broadcast image if you use LEDs as a substitute light source for halogen lamps and fluorescent lamps that are large in size and uncomfortable to handle it is expected that the lightening of the equipment will activate the broadcasting image lighting equipment industry. After considering the mass production of the LED module board and the SMT production size of the chip mounter, the board size was determined considering the overall size of the product by model. In this paper, four 20W LED boards are arranged vertically in order to produce an 80W board. In other words, by sharing LED module board size by model, high power LED lighting equipments of 120W and 200W can be selected as an increase in the number of boards.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.851-854
• /
• 2004

This paper studies Optical Fiber(OF) - LED illuminated display board system for energy saving. The OF-LED illuminated display board system has PV modules, batteries, and charge & discharge system, and dynamic full color display controller. Both maximum power point tracker (MPPT) and constant current & constant current controls (CCVC) are used In govern the charging system. It can be improve the charging efficiency of battery. The objective of this thesis paper is to build advertisement lighting system with OF-LED in to charge a 12-volts lead acid battery by using a field wired PV array. We saved the maintenance cost and developed of advertisement effectiveness. To verify the proposed OF-LED illuminated display board system for energy saving, the detail simulation and experiment results indicate that operating characteristics are verified by experiment with a laboratory prototype in this paper.

• KIEAE Journal
• /
• v.7 no.4
• /
• pp.31-38
• /
• 2007

Streetscape plays on important role in urban cities. Characteristics of streets is basically defined by the building facade, signs, plants and paving during the daytime. However at night, street receives a new appearance due to the shop light from the buildings, exterior lightings, signboards and street light, and it creates most of the image of the streets. This study aims to analyze the luminous environment and its subjective image of two different pedestrian's commercial streets. Insa-dong street and Myungdong street were chosen for the study. Horizontal illuminance and luminance on building surface, advertisement billboards and pedestrian road were measured. Thirty students were asked to rate the five scaled questionnaire on their subjective images of the streets. Statistical analysis including profile, correlation and T-test are conducted and some findings are discussed

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2002.11a
• /
• pp.265-268
• /
• 2002

가상광고는 실제 영상에 존재하지 않는 정보를 추가함으로써 영상의 정보 제시 능력을 향상시키는 것으로 폭넓고 다양한 정보가 영상에 더해질 수 있다. 이러한 가상광고를 보다 현실감 있게 구현하기 위해서는 여러 가지 환경이 갖추어져야 하는데, 그 중 하나가 사물에 대한 조명 효과이다. 본 논문에서는 가상광고 영상으로부터 조명을 고려한 그래픽 정보를 삽입함으로서 좀 더 현실감 있는 증강현실을 구현하고자 한다. 제안된 방법은 카메라로 촬영한 영상으로부터 3차원적인 위치정보를 알고 있는 고정된 4개 이상의 특징점 추출 및 추적을 통하여 카메라의 프로젝션(Projection) 행렬을 복원하고, 이를 이용하여 범용적인 크로마키(Chroma-Key) 기법으로 영상합성을 하였다. 행렬복원 과정에서는 카메라의 프로젝션 행렬로부터 QR-Decomposition 을 통해 카메라의 회전과 이동 성분을 분리해 내어 가상 물체가 카메라에 의해 움직임 보정을 받을 수 있도록 하였다. 그리고 인의의 위치에 조명을 주었을 때 생기는 변화를 그래픽에 반영하여 실사와 합성하는 실시간 시스템을 구축하고 실험으로 확인하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.5
• /
• pp.355-364
• /
• 2009

Electro-Luminescence (EL) sheets have been widely used in lighting displays, mainly used as advertisement panels. To drive the ELs in optimal conditions, it is required to understand the load profile of the EL. Hence, in this paper, a modeling for an EL sheet was performed to analyze the load characteristics of the EL. Based on the extracted model of the EL, a topology for inverter system was chosen and the optimal design parameters were obtained. The validity of the designed EL driver system was verified through computer simulations and experiments.

• The Research Journal of the Costume Culture
• /
• v.25 no.3
• /
• pp.285-300
• /
• 2017

This study analyzes the images of models in womenswear advertisements targeting women in their fifties. The goals of this study are: 1) to investigate beauty ideals for middle-aged women by analyzing models' look age, chronological age, wrinkles, gray hair, hair length, body type, and race; and 2) to explore how ageing is dealt with in advertisements by analyzing the range of bodies shown in advertisements, the color mode of photographs, and the clarity of models' figures in relation to models' look ages. A total of 155 printed advertisements from January 2012 to January 2017 from the brands Daks Ladies, Lebeige, Luciano Choi, PAT, and Zishen were selected for analysis. Womenswear brands targeting middle-aged women reinforce cultural ideals of female beauty that emphasize youth and slenderness. They do this by using thin and slender models, who most often appear to be in their twenties and thirties, and have hair longer than their shoulders. Brands with higher price ranges show a preference for Caucasian models, which reveals that a Caucasian identity is associated with sophistication. In addition, the bodies of models who appear to be in their forties and fifties were concealed by framing photographs mostly above the knees. Older models' features were also obscured via the use of black and white photography, strong lighting and contrast, and digital editing that blurred the boundaries between figures and their backgrounds. These decisions for how to represent models could result in negative self-esteem and a denial of the symptoms of ageing among middle-aged women.

• Cartoon and Animation Studies
• /
• s.29
• /
• pp.103-128
• /
• 2012

Study about existence of illusion which human beings feel from imitated image based reality have been continuing by copy theory and conventionalism for a long time. Traditional copy theory which had controlled representation theory from plato have explained illusion by similarity of image and representation objects. According to copy theory, image is natural sign unlike language but the late in the 20th century, conventionalism from N, Goodman insists they are not any special similarity between image and representation objects. They insist image and conventional sign just as language. These opposit theory rearranged conventionalism by the entrance on the cognitive science. The copy theory couldn't explain the problem of representational gap between reality and duplication, but photo media makes new paradigm about theory of the illusion. The problem of representational gap was disappeared by CGI images on the base of digital media. We are exposed exquisite duplication for a example, movie, advertisement, printings. Sometimes duplications are more real than the original works. Digital is a non-material object by 0 and 1. Specially real lighting skill and mechanism are copied perfectly by photon mapping skills and the duplications are produced more real than the original works. By disappearance of representational gap, we need new theory model for explaining of digital illusion and copy theory can be the key.