• Journal of Advanced Marine Engineering and Technology
• /
• v.11 no.1
• /
• pp.53-62
• /
• 1987

The Performance of Pre-combustion Chamber Diesel Engine mainly depends upon the compression, combustion and Expansion Processes. The analysis of varying tendency of the work factors for crank angles during these processes, which are consisted of 5 items such as exothermic energy, flow work, work in nozzle part, kinetic energy and cooling energy, are considered important as basic elements for effective combustion and performance improvement. In this paper, varying tendencies of the theoretical factors are investigated with pressure data through experiments. By the results, the trends of work factors are presented as basic data for comparing the influencing effects on work.

• International Journal of Korean Welding Society
• /
• v.2 no.2
• /
• pp.42-46
• /
• 2002

The solidification cracking susceptibilities of Al-Mg-Si alloy laser welds were assessed using the self-restraint tapered specimen crack test. The cracking susceptibility of 6061 and 6082 Al-Mg-Si alloy laser welds was substantially reduced when the filler wire containing high Si such as Al-12 wt.% Si (4047A) was used. The amount of eutectic was observed to affect the solidification cracking of Al-Mg-Si alloy laser welds. Abundant eutectic seems to heal the cracking and reduces the cracking susceptibility, while an initial increase in eutectic liquid leads to the increased cracking tendency.

• Carbon letters
• /
• v.10 no.1
• /
• pp.38-42
• /
• 2009

This study aims to find a correlation between XRD and Raman result of the oxidized high modulus carbon fibers as a function of its oxidation degrees, and compare with the isotropic carbon fiber reported early. La of the high modulus carbon fiber prepared by oxidation in carbon dioxide gas have been observed using laser Raman spectroscopy. The basic structural parameters of the fibers were evaluated by XRD as well. The La of the original high modulus carbon fibers were measured to be 144 ${\AA}$ from Raman analysis and 135 ${\AA}$ from XRD analysis. La of the 92% oxidized fiber were 168 ${\AA}$ by using Raman and 182 ${\AA}$ by using XRD. There was some correlation between the La value obtained from Raman and XRD. However the La value changes of the high modulus carbon fiber through whole oxidation process showed opposite tendency compare with the isotropic carbon fiber because of the fiber structure basically.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.446-450
• /
• 2007

It is strongly expected that inkjet printing method will be play and important role on printable electronics such as 3D integration of embedded ceramic devices(capacitor, resistor, inductor and electrode or circuit), Si-TFT and organic TFT including display C/F, RFID, FPCB, and etc. A inkjet printing method had been center of attention to strengthen the competitiveness of flat panel display on market and to open the new world of manufacturing process of printable electronics. We will survey the industrial tendency of printable electronics and flat panel display including some examples of inkjet printing and present the considerable points of inkjet printing method and some role of materials for successful inkjet printing.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.260-264
• /
• 2003

The application of solar energy, in the field of alternative energy, was on the increase tendency. In the case of advanced nations, through continuous R&D, solar-heat hot-water-boiler with high efficiency has been used for the house and the industrial process on business, advanced nations on reached up the experimental stage of solar generation system. But the actual circumstance of the domestic has been not accomplished the popularization of solar-heat hot-water-boiler and the settlement of it which is the fundamental stage of the solar energy usage. This trouble, the domestic was flooded with small enterprise for producing solar-heat hot-water-boiler, was caused by the popularization and the production without verification of performance. To supply the monitoring program for evaluating solar-heat hot-water-boiler, this research was purpose to improve the technical development of the enterprise for producing solar-heat hot-water-boiler and served as an aid f3r the enlargement and the popularization on solar energy.

• English Language & Literature Teaching
• /
• v.13 no.4
• /
• pp.109-126
• /
• 2007

English article has been considered as one of the most difficult areas to learn among ESL/EFL students. The current paper reviews English learners' article error patterns as well as pedagogy in order to teach English articles and to minimize learning difficulties on English articles. Different pedagogy for English articles on the basis of learners' proficiency levels are suggested as each proficiency level student shows a different error tendency; beginning level language learners used the zero article with the most facility while intermediate level language learners used the definite article the most accurately. However, studies about high advanced level learners' error patterns present that these high accuracy rates among beginning level students might be a result of students' plain guessing. Considering these error patterns, pedagogy for advanced level is also suggested.

• KSTLE International Journal
• /
• v.10 no.1_2
• /
• pp.27-32
• /
• 2009

In this study, fretting wear tests of nuclear fuel rods have been performed by using two kinds of spacer grid springs with a concave and a convex shape in room temperature dry and distilled water conditions. The objectives were to examine the variation of the wear mechanism with increasing fretting cycles and to evaluate the difference of the wear debris detachment behavior at each test environment. From the test results, the wear volume of each spring condition increased with increasing fretting cycles regardless of the test environments. However, the wear rate did not show a regular tendency and apparently changed with increasing fretting cycles. This is because the formation of the wear particle layer and/or the variation of the contact condition between the fuel rod and spring surfaces could affect a critical plastic deformation for detaching the wear debris. Based on the test results, the relationship between the wear behavior of each spring shape and test environment condition, and the variation of the surface characteristics are discussed in detail.

• Korean Journal of Child Studies
• /
• v.25 no.1
• /
• pp.13-29
• /
• 2004

In this study of strategies used by young children in solving rectangular covering tasks before they have been taught area measurement, 75 5-, 6-, and 7-year-old children were asked to solve 3 rectangular covering tasks with a moveable unit. Three different sized units (4 cm., 2 cm., and 1 cm. cardboard squares) were provided and the children were asked to work out how many would be needed to cover a drawn rectangle. The resulting 5 developmental levels include incomplete covering, incomplete arrangement, complete covering, estimating, and measuring. Children using more advanced strategies were able to find correct number of units. While the tendency among older children was to use more advanced strategies, even 5-year-olds had an intuitive understanding of rectangular area measurement.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.156-161
• /
• 2004

The application of solar energy, in the field of alternative energy, was on the increase tendency. In the case of advanced nations, through continuous R&D, solar hot water heater with high efficiency has been used for the house and the industrial process on business, advanced nations were reached up the experimental stage of solar generation system. But, the actual circumstance of the domestic has been not accomplished the popularization of solar hot water heater and the settlement of it which is the fundamental stage of the solar energy usage. This trouble, the domestic was flooded with small enterprise for producing solar hot water heater, was caused by the popularization and the production without verification of performance. To supply the monitoring program for evaluating solar hot water heater, this research was purpose to improve the technical development of the enterprise for producing solar-heat hot-water-boiler and served as an aid for the enlargement and the popularization on solar energy.

• Journal of Fisheries and Marine Sciences Education
• /
• v.11 no.2
• /
• pp.115-138
• /
• 1999

Since the STCW-F convention was adopted, The states concerned, has been investigated in many ways to adopt the prevailing circumstance and condition, accordingly, all preparation will be provided to accept the STCW-F convention to promote the safety of life and prevention of pollution. Prior to enter into force of this convention, we have to investigate the matter of policies, and must have great international concern to the seamen's education. Especially, we should discuss functional skill and knowledge matrix of fishing vessel seamen's education with the supplementary studies, and therefore, we should reflect to the contents, methods of education, inducement of advanced technics, application of education all aids to meet the acceptance of STCW-F convention. Also, we are attempt to implement to accept high quality of fishing vessel seamen's education as the application of simulator and any other advanced devices in future.