• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.677-680
• /
• 2009

DC influence between pixel electrode and alignment layer (AL) in in-plane switching mode LCD was analyzed through DC equivalence-circuit equation induction, DC charge-discharge simulation, luminance and residual-DC measurement systems using test patterned (TP) cell. DC discharging rate (DDR) of single layer electrode was faster than that of double layer electrode and DDR of low resistance AL was faster than that of high resistance AL. DC discharging characteristics had a close relation to layer number and resistance between two electrodes.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.828-830
• /
• 2003

We have constructed a level-1 processor to generate brightness temperatures using the direct-broadcast data from the passive microwave radiometer onboard Aqua satellite. Although 50-minute half-orbit data, called a granule, are being routinely produced, to our knowledge, this is the first attempt to process about 10-minute long direct-broadcast data. We modified the processor designed for a granule to process the direct-broadcast data. After the modification, our brightness temperature product differs from the reference by 0.2K rms. Sea surface temperatures are retrieved to demonstrate the utility of AMSR-E.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.139-140
• /
• 2007

본 연구에서는 ion bombardment에 의한 폴리머 기판의 손상을 줄이기 위해 FTS (Facing Target Sputtering) 장치를 이용하여 투명 전극용 ITO 박막을 합성하였다. 산소와 헬륨의 혼합비율을 변수로 하여 박막을 합성한 결과, 투명전극에 적합한 낮은 비저항과 80% 이상의 투과도를 갖는 박막을 합성할 수 있었다.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.306-309
• /
• 2002

A superconducting CICC (Cable-In-Conduit-Conductor) is adopted the KSTAR (Korea Superconducting Tokamak Advanced Research) superconducting magnet system which consists of 16 TF coils and 14 PF coils. For the test of KSTAR CICC, an ambient magnetic field of $\pm$ 8 T With a maximum change rate of 20 T/s is required and a background-field magnet system is being developed for SSTF (Samsung Superconductor Test Facility). The CICC for PF1~5 is used as the conductor for background-field coils to check the validity of the PF CICC design. Two pieces of cables have been fabricated and the cable has the length of 870 m and the diameter of 20.3 mm. A continuous CICC jacketing system is developed for the KSTAR CICC fabrication and the jacketing system uses the tube-mill process, which consists of forming, welding, sizing and squaring procedures. The design specification of CICCs and the fabrication process is described.

• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.147-159
• /
• 2024

Plutonium-238 has always been considered as the one of the promising radioisotopes for space nuclear power supply, which has long half-life, low radiation protection level, high power density, and stable fuel form at high temperatures. The industrial-scale production of ²³⁸Pu mainly depends on irradiating solid ²³⁷NpO₂ target in high flux reactors, however the production process faces problems such as large fission loss and high requirements for product quality control. In this paper, a conceptual design study of producing ²³⁸Pu in a multi-purpose high flux reactor was evaluated and analyzed, which includes a sensitivity analysis on ²³⁸Pu production and a further study on the irradiation scheme. It demonstrated that the target structure and its location in the reactor, as well as the operation scheme has an impact on ²³⁸Pu amount and product quality. Furthermore, the production efficiency could be improved by optimizing target material concentration, target locations in the core and reflector. This work provides technical support for irradiation production of ²³⁸Pu in high flux reactors.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.06a
• /
• pp.85-85
• /
• 1998

• Proceedings of the Korean Vacuum Society Conference
• /
• 2007.08a
• /
• pp.367-367
• /
• 2007

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.11a
• /
• pp.450-451
• /
• 2018

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.04a
• /
• pp.21-22
• /
• 2003

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.07a
• /
• pp.91-92
• /
• 1999