• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1361-1366
• /
• 2007

Forging for spring cup of engine valve was investigated in this study. New method is needed to reduce cost and development lead time required to fix forming process of new product, that eventually can provide die, metal flow and forming loads with high confidence level. FEM could provide required detail information that could reduce trial error in advance before the actual production. By using the rigid-plastic finite element simulation, possibilities of improving former research were explored. Results generated by FEM could foresee expected material deformation in advance and made possible new forming process successfully.

• 대한기계학회논문집A
• /
• 제27권2호
• /
• pp.294-301
• /
• 2003

It is of often important to accurately predict the flow-induced vibration or dynamic instability of a pipeline conveying internal high speed flow in advance, which requires a very accurate solution method. In this study, first the dynamic equations for the axial and transverse vibrations of a pipeline are reduced from a set of pipe-dynamic equations derived in the previous study and then the spectral element model is formulated. The accuracy of the spectral element method (SEM) is then verified by comparing its results with the results obtained by finite element method (FEM). It is shown that the present spectral element model provides very accurate solutions by using an extremely small number of degrees-of-freedom when compared with FEM. The dynamics of a sample pipeline is investigated with varying the axial tension and the speed of internal flow.

• 터널과지하공간
• /
• 제30권5호
• /
• pp.484-495
• /
• 2020

EPB TBM의 굴진을 수치적으로 해석하기 위해 개별요소법(DEM, discrete element method), 유한요소법(FEM, finite element method), 유한차분법(FDM, finite difference method) 등과 같은 다양한 수치해석 기법이 적용되어 왔다. 본 논문에서는 이중 개별요소법과 유한차분법을 연계하는 방식을 채택하여 EPB TBM 굴진해석 모델링 방법을 제시하였다. 제시한 개별요소법-유한차분법 연계 TBM 굴진해석 모델에서 TBM이 굴착하는 굴착부는 개별요소법을 적용하였으며, 입자 접촉 물성치의 경우 일련의 삼축압축시험을 통해 교정하였다. 굴착부 주변지반은 유한차분법을 연계시켜 정지토압계수를 고려하여 굴착부에 수평지중응력을 구현할 수 있도록 하였다. 또한, 이를 통해 소요 입자 개수를 감소시켜 모델의 해석효율을 증대시켰다. 본 논문에서 제시한 수치해석 모델은 TBM의 굴진율, 커터헤드 및 스크류 컨베이어 회전속도 등을 조절할 수 있으며 TBM 굴진 중 토크, 추력, 챔버압, 배토량을 도출해 낼 수 있다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 추계학술대회논문집
• /
• pp.174-184
• /
• 1996

Two methods for cold extrusion processes to produce an axisymmetric steel gear blank are investigated for comparing each other. The "classical" forming method consisting of four operations is selected first to be simulated using the rigid-plastic finite element method and uses single-die presses. The other using a fully automated transfer headers can produce the final part without interannealing. The final products must be checked at the design criteria such as area reduction, the extrusion ratio and punch diameter to depth ratio, especially punch buckling by simulations. FEM analysis is performed mainly for strain distribution, both process sequences are proved to have proper charicteristics suitable for each production method in terms of maximum load. Those simulation results will provide good design criteria in the future work to advance the manufacturing process.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 춘계학술대회논문집
• /
• pp.130-137
• /
• 1996

Several cold extrusion processes to produce an axisymmetric steel piston-pin are investigated for comparing each other. Two methods among four conventinal ones are selected to be simulated using the rigid-plastic finite element method. One of the both methods using a mechanical press has one stage process and the other utilizing a cold header applies a multi-stage process to produce a final product. Because the main process is a backward extrusion, the design criteria such as the backward extrusion ration and punch diameter to depth rationare ocnsidered. FEM analysis is performed mainly for strain distributin and load-stroke relationshis. Based on the results of preliminary simulatin, both process sequences are proved to have proper charicteristics suitable for each production method in terms of maximum load. Those simulation results will be a good design criteria in the future work to advance the manufacturing process.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.379-382
• /
• 2004

In this paper, it is investigated in advance about the PZT-based composition for piezoelectric vibration device. The specimens of piezoelectric ceramics are made of Columbite method. The piezoelectric vibration device by this composition is designed by ATILA(Magsoft) program used FEM(Finite Element Method). The vibration device used for mobile phone must be driven in the frequency of $130{\sim}200Hz$, so the resonant frequency of piezoelectricity must adjust driven frequency bandwidth. The result of analysis by ATILA is appeared dependant property of length, width, thickness and dummy weight about resonant frequency of the piezoelectric vibration device. The size of manufactured actuator is $28{\times}12{\times}0.3mm^3(length {\times}width{\times}thickness)$ and this is bimorph type. The test of manufactured piezoelectric vibration device measure displacement, acceleration and power dissipation. The piezoelectric vibration device has the advantage more than electro-magnetic motor, however the size of manufactured device is larger than electro-magnetic motor.

• 한국산학기술학회논문지
• /
• 제15권7호
• /
• pp.4469-4474
• /
• 2014

본 논문에서는 유한요소법을 사용하여 자기부상열차용 선형 유도 전동기의 효율적인 운전곡선 도출 방법을 제안한다. 긴 시간의 동특성 해석을 위해 선형유도기 모델을 선형에서 회전형 타입으로 변환하고, 제어시 필요한 슬립 파라미터를 전자장 해석을 통하여 효과적으로 도출하였다. 견인용 선형유도전동기는 인버터에 의해 저속의 정토크 영역에서는 전압/주파수 (V/f) 일정제어를 수행하고, 고속에서의 정출력 영역에서는 전압을 고정시키고 주파수를 증가시키면서 제어한다. 따라서 논문에서는 정토크 및 정출력 영역의 운전 특성을 도출하기 위해 각 구간에서 일정한 스텝으로 슬립특성 곡선을 도출하고, 차량의 운전 상태에 따른 슬립 및 주파수를 특성곡선의 보간법에 의해 결정한다. 본 방법을 이용하면 차량의 임의의 부하상태에 따라 최적의 운전 지령을 제시할 수 있다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.190-195
• /
• 2001

The piercing and blanking of thin sheet metal working is specified division in press die design and making. In order to prevent the defects, the optimum design of the production part, strip process layout, die design, die making and try out etc. are necessary the analysis of effective factors. For example, theory and practice of metal shearing process and it's phenomena, die structure, machine tool working for die making, die materials and it's heat treatment, metal working in field, their know how etc. are included in those factors. In this study, we analyzed whole of data base, theoretical back ground of metal working process, and then performed the progressive die tryout with the screw press.

• 한국소음진동공학회논문집
• /
• 제16권10호
• /
• pp.997-1004
• /
• 2006

With the growth in electronics and the remarkable advance in wireless communication technology, mobile devices, such as mobile phones and PDAs are incessantly improved in their diverse functional performance. Lighter weight and smaller size has been gradually accomplished by recent circuit integration technology resulting in rapid growth in the number of mobile phone subscribers. Driven by customer demand, recent mobile devices are fully capable of realizing a variety of dazzling multimedia effects powered by electro-acoustic parts that have become one of the generic components. However, This paper also presents an oval micro-speaker, that is' expected to show an excellent performance within limited space of mobile phone, and its performance design has been suggested as well. Finally, a statistical approach to achieve high characteristic and performance is suggested by Taguchi method to identify a certain relationship between a mobile phone and a micro-speaker.

• 한국산학기술학회논문지
• /
• 제11권2호
• /
• pp.443-448
• /
• 2010

기능이 극대화된 초소형 전자기기를 제조하기 위해 사용되는 적층형 소자들 중, 적층 세라믹 콘덴서(MLCC: Multi Layer Ceramic Capacitor)는 휴대전화, 노트북 등에 전자회로의 평활, 안정화, 노이즈 제거, 커플링 등 다양한 용도로 사용되고 있다. 적층형 세라믹 콘덴서는 생산과정에서 압축소결된 미세 다층구조의 적층형 소자 바(bar)를 하나 하나의 칩으로 절단하여야 한다. 현재 적용되고 있는 cutting, dicing 등의 방법을 대신하여 수율의 향상을 도모하기 위해 진동절삭법을 적용하여 그 특성을 조사하였다. 유연 힌지구조를 이용한 진동 절단 구조를 설계하고 해석하여 적층형 세라믹 콘덴서의 절단에 알맞은 진동절단기구를 제안한다. 또한, 설계결과를 바탕으로 제작된 진동절단 기구의 절단가공 특성을 조사하여 기존 절단법과의 성능비교를 통해 힌지 구조를 이용한 진동 절단의 타당성을 검증하였다.