• 제목/요약/키워드: Adsorbent

검색결과 1,034건 처리시간 0.026초

지역문화 특성화를 위한 캐릭터 개발에 관한 연구 - 광주광역시 캐릭터 개발 사례를 중심으로 - (A Study on the developing Character Contents for the making specialized regional culture - Centering on a development project of Characters in the city of Gwangju -)

  • 신승택;유장웅
    • 한국콘텐츠학회:학술대회논문집
    • /
    • 한국콘텐츠학회 2004년도 춘계 종합학술대회 논문집
    • /
    • pp.193-206
    • /
    • 2004
  • 예로부터 빛고을로 인식되었던 광주가 근세에 이르러 의병활동, 광주학생운동, 5\ulcorner18민주화운동, 아직도 끝나지 않은 이념전쟁으로만 비추어질 수도 있는 지역의 이미지를 재정립하고, 도시 경쟁력의 증대를 위한 방안으로 CI사업 추진계획을 수립하고 3개년에 걸쳐(1999~2001) CI전략 개발, CI디자인 개발, 문화상품 개발, 도시환경디자인 개발 등을 추진하였다. 최근 커뮤니케이션에 있어서 캐릭터는 정보의 시각화라는 측면에서 다른 그래픽 심볼에 비해 설득적이라 할 수 있고, 기존의 심볼의 이미지 보완적 보조심볼로서의 개념이 아닌 독자적인 영역이 구축되어야 하므로 광주광역시 캐릭터 개발은 Character Identity 차원에서 메인캐릭터와 이를 각각의 용도에 맞춰 응용전개시키는 이벤트 캐릭터, 브랜드캐릭터로 구분하여 유형에 따라 다르게 적용되어야 할 적용성 및 활용성에 중점을 두고 개발되었다. 광주광역시의 메인캐릭터 개발컨셉은 "빛"과 "생명"으로 결정된 TCI이념을 활용하는 것과 광주의 상징 요소로서 "무등산"을 활용하는 두 가지 방향에서 개발이 진행되었으며, 1999년 10월의 TCI 추진회의 1차선정을 시작으로 광주시민을 포함한 전국민 설문조사와 2000년 4월의 의회설명회에 이르기까지 다양한 방법을 통해 캐릭터 개발안에 대한 평가와 검토/수정과정을 거쳐 기본캐릭터를 완성하게 되었다. 이를 통해 본 광주광역시의 캐릭터는 중장기적으로 치밀하게 계획되고 실천되어야 하며 변화하는 환경에 효율적으로 대응하는 구체적이고 실천적인 연구평가와 접근방법에 대한 연구 등으로 그 지역의 특징적인 문화를 상품화시키려는 노력이 캐릭터개발을 토대로 뒤따라야 한다. 촉진, 중요 연구 주제의 도출 및 연구 진행 계획을 수립하고, 국제적 산학 협력 강화를 통해 공동 연구를 도출하는 자리를 마련함. $\textbullet$본 학술회의에서 발표된 논문들을 취합하여, 논문집 및 CD-ROM을 제작하여 세계적 수준의 연구 결과를 알리고 이 분야에 관련된 학문, 기술 발전에 큰 도움이 됨.emove effectively radioactivity with in Adsorbent. As cleaning heavy water adsorbent and drying on each condition (temperature for drying and hours for cleaning). Because there is something to return heavy water adsorbent by removing impurities within adsorbent when it is dried o high temperature. After operating, we have been applying this research to the way to dispose heavy water adsorbent. Through this we could reduce solid waste products and the expense of permanent disposal of radioactive waste products and also we could contribute nuclear power plant run safely. According to the result we could keep the best condition of radiation s

  • PDF

Triple-bed Adsorbent Tube를 이용한 가스상 극미량 복합 악취 및 휘발성 유기화합물의 동시 분석 (Simultaneous Analyses for Trace Multi-Odorous and Volatile Organic Compounds in Gas using a Triple-bed Adsorbent Tube)

  • 서용수;이제근
    • Korean Chemical Engineering Research
    • /
    • 제48권2호
    • /
    • pp.244-252
    • /
    • 2010
  • 본 연구에서는 Triple-bed 흡착튜브를 제작하여 열탈착장치와 GC-MS로써 다성분 복합 악취성물질 및 휘발성유기 화합물을 동시분석 가능성을 평가하고자 하였다. Triple-bed 흡착튜브는 하나의 튜브에 Tenax-TA와 소량의 Carbopack B 및 Carbosieve SIII 흡착제를 흡착강도 순으로 3단 배열된 것이다. GC-MS의 분석조건은 mass range 20~350 m/z, 불순물 1 ppm 이하의 헬륨을 운반가스로 하여 저비점 저분자량 물질의 분리동정에 효과적일 수 있도록 하고, 목적이온 추출을 통하여 정량하였다. 그 결과 ppbv 수준의 $C_1{\sim}C_5$의 알콜(4), 알데히드(6), 케톤(2) 그리고 황화합물(2)을 포함한 14종의 물질 모두 99%이상의 회수율과 양호한 재현성 및 직진성으로 동시분석이 가능하였다. 비교적 휘발성이 강하고 분자량이 낮은 물질인 메틸알콜, 아세트알데히드는 상대습도 45% 이하, 흡착유속 50 mL/min, 흡착량 2 L 이하에서 높은 회수율로 보다 안정적으로 정량분석이 가능하였다. 또한 목적이온 추출은 물질피크가 겹쳐 나타난 경우에도 다성분 물질을 각각 정량 가능하였다.

고온 처리된 납석을 흡착제로 이용한 용액상의 불소 제거 (Fluoride Removal from Aqueous Solution Using Thermally Treated Pyrophyllite as Adsorbent)

  • 김재현;송양민;김성배
    • 대한환경공학회지
    • /
    • 제35권2호
    • /
    • pp.131-136
    • /
    • 2013
  • 본 연구의 목적은 고온 처리된 납석을 흡착제로 이용하여 불소 제거를 연구하는 것이었다. 본 연구에서는 흡착제양, 반응시간, 초기불소농도 그리고 용액pH가 불소제거에 미치는 영향을 관찰하기 위하여 회분조건에서 흡착실험을 수행하였다. 실험에는 다양한 온도에서 열처리한 납석[무처리 (P-U), $400^{\circ}C$ (P-400), $600^{\circ}C$ (P-600)]을 사용하였다. 실험결과, 불소흡착능은 P-400 > P-U > P-600 순으로 나타났다. XRD 분석결과, P-U와 P-400은 석영, 디카이트, 엽납석으로 구성된 반면, P-600은 석영으로만 구성된 것으로 나타났다. BET 분석결과, 비표면적은 P-600 > P-400 > P-U 순으로 나타났다. 동역학적 실험결과, P-400에서의 불소흡착은 24시간 이내에 평형에 도달하였다. 평형흡착 실험결과, P-400의 최대 불소흡착능은 0.957 mg/g이었다. 또한, P-400에 의한 불소제거는 pH 4-10범위에서 용액 pH의 영향을 받지 않았지만, 강산성(pH < 4)과 강염기성(pH > 10) 조건에서는 불소제거가 크게 감소하였다. 본 연구에 의하면, 납석은 저가 흡착제로써 수용액상의 불소제거에 이용될 수 있을 것으로 판단된다.

A Study of the Optimum Pore Structure for Mercury Vapor Adsorption

  • Kim, Byung-Joo;Bae, Kyong-Min;Park, Soo-Jin
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권5호
    • /
    • pp.1507-1510
    • /
    • 2011
  • In this study, mercury vapor adsorption behaviors for some kinds of porous materials having various pore structures were investigated. The specific surface area and pore structures were studied by BET and D-R plot methods from $N_2$/77 K adsorption isotherms. It was found that the micropore materials (activated carbons, ACs) showed the highest mercury adsorption capacity. In a comparative study of mesoporous materials (SBA-15 and MCM-41), the adsorption capacity of the SBA-15 was higher than that of MCM-41. From the pore structure analysis, it was found that SBA-15 has a higher micropore fraction compared to MCM-41. This result indicates that the mercury vapor adsorptions can be determined by two factors. The first factor is the specific surface area of the adsorbent, and the second is the micropore fraction when the specific surface areas of the adsorbent are similar.

엽록체를 이용한 수중에서의 중금속 흡착 및 탈착 특성 (Biosorption and Desorption Characteristics of Heavy metal ion in Aqueous Solution by Chlorophyll)

  • 연익준;신택수;이명선;주소영;김광렬
    • 환경위생공학
    • /
    • 제14권1호
    • /
    • pp.80-87
    • /
    • 1999
  • According to the fact that algae, which is usually used as a biosorbent, contains chlorophyll, we used the chlorophyll as an adsorbent. In this study, chlorophyll is immobilized by agar, which was made of platan, oak, ginkgo and pine. We investigated the removing capacity of biosorbents to toxic heavy metals (Pb, CU, Cd, Zn) in the single ion solution. Then the experimental parameters were pH, reaction time and concentration of heavy metal ions.The optimum conditions for the adsorption of heavy metals were as follows : pH range was 4~5, reaction time was 40mon, and the highest ratio of the removing rate was 50~70 ppm. The order of the amount of Pb, Cu and Cd removed was specified as oak > ginkgo > pine > platan in these conditions and as pine > ginkgo > oak > platan at Zn. Fro the results of the desorption experiments, we found that the heavy metal with the highest ratio of desorption in the single ion adsorbent was Cu.

  • PDF

탄화분변토를 이용한 Benzene의 흡착특성 (Adsorption Characteristics of Benzene by Carbonized Cast)

  • 김재홍;손희정;김미룡
    • 환경위생공학
    • /
    • 제14권1호
    • /
    • pp.97-102
    • /
    • 1999
  • This study was carried out view that reuse of sludge of adsorbent for benzene in carbonized cast compare with activated carbon. Not only the carbonized cast is good than carbonized carbon in cation exchange capacity and 12 adsorption capacity, but also benzene adsorption capacity is no differences compare to activated carbon. As results, benzene adsorption capacity of carbonized cast and activated carbon are decreased as temperature increase($25~70^{\circ}C$).It is compatible in Lamgmuir model. Therefore, carbonized cast is applied general adsorbent. From experimental results and data regression, in model concerning effect of temperature, relative errors between the experimental data and those calculated by the model are within the range of 1.2~7.8%. In relative humidity effect (RH 0.25~0.50) of benzene adsorption, modified Freundlich model : $QB_{enzene}{;\}QB_{enzene},{\}_{RH=0}=1-kRH^{IN}$, relative errors between the experimental data and those calculated by the model are within are range of 0.5-5.1%. The constants k and l/n in equation were found to be 1.25, 1.89 in carbonized cast.

  • PDF

A Novel Purification Process for Homoharringtonine from Celphalotaxus koreana

  • Sung, Ju-Li;Kim, Jin-Hyun
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2003년도 생물공학의 동향(XIII)
    • /
    • pp.521-524
    • /
    • 2003
  • An effective purification method was developed for producing Homoharringtonine (HHT), to guarantee high purity and yield from Cephalotaxus koreana. This process was a simple and efficient procedure, for the isolation and purification of HHT form the biomass of Cephalotaxus koreana, consisting of extract, adsorbent treatment, precipitation and followed by a chromatography. The extraction, adsorbent treatment and precipitation in pre-purification process allows for rapid and efficient separation of HHT from many compound and dramatically increases the yield and purity of crude HHT for HPLC purification steps compared to alternative processes. This purification processes serves to minimize solvent usage, size, and complexity of the operations for HHT purification.

  • PDF

ACF 흡착관 개발을 위한 파괴특성에 관한 연구 (A study on breakthrough characteristics of activated carbon fiber by development of sorbent tube)

  • 원정일;김기환
    • 환경위생공학
    • /
    • 제20권1호
    • /
    • pp.40-54
    • /
    • 2005
  • This dissertation aims to develop adsorption tubes for measuring organic solvents in the working environment, by comparing and analyzing breakthrough condition and adsorption capacity with ACF. 1. In breakthrough characteristics, the raising velocity of breakthrough curve is increasing according to assault concentration, but $50\%$ breakthrough time is decreasing. As breakthrough curve of calculated data using this agrees with the one of experimental data both of them can be used on determining sampling time of adsorption tubes. It is predicted by theoretical that $10\%$ breakthrough time is increasing in the case of increasing filled adsorbent amount. 2. $10\%$ breakthrough time is regularly decreasing as much as assault concentration is increasing. As a result, we can predict the life of adsorbent within the range of the low concentration, and adsorption amount that ACF can sample during $10\%$ breakthrough time is increasing as much as assault concentration is increasing.

흡착관/열탈착 GC/MS 방법에 의한 모사시료 중의 미량 페놀 분석에 관한 평가 (Evaluation of the Measurement of Trace Phenols by Adsorption/Thermal Desorption/Gas Chromatography/Mass Spectrometry (ATD/GC/MS) in Artificial Air)

  • 허귀석;이재환;황승만;정필갑;유연미;김정우;이대우
    • 한국대기환경학회지
    • /
    • 제18권2호
    • /
    • pp.127-137
    • /
    • 2002
  • Phenolic compounds in air are toxic even at their low concentrations. We had evaluated a total of five phenolic compounds (Phenol, o-Cresol, m-Cresol, 2-Nitrophenol and 4-Chloro-3-methylphenol) in artificial air using a combination of ATD/GC/MS. To compare the adsorption efficiency of these phenolic compounds, three adsorbents (Tenax TA, Carbotrap and Carbopack B) were tested. Tenax TA adsorbent was most effective of all the adsorbents used for the efficiency test. Five phenolic compounds were found to be very stable on adsorbent tubes for 4 days at room temperature. Detection limit of five phenolic compounds ranged from 0.05 to 0.08 ppb (when assumed to collect 10 L air). The calibration curve was linear over the range of 22∼ 164 ng. The reproducibility was less than 4%. Sampling of duplicate pairs (DPs) was made to demonstrate duplicate precision and sampling efficiency.