• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.9
• /
• pp.4326-4341
• /
• 2016

In this paper, an adjustable multiple relay selection (MRS) scheme for cooperative communication with amplify-and-forward (AF) relay under frequency selective channels is proposed. In the proposed scheme, the relays are ordered firstly by the steady-state mean square error (MSE), then the relays are sequentially selected out from N relays and the number of cooperating relays is adjusted dynamically according to the steady-state mean square joint error (MSJE). The aim of this work is to dynamically estimate the optimum number N_o of cooperating relays. Optimum means the minimum number of cooperating relays, N_o, achieving the minimum level of steady-state MSJE. Numerical results verify the analyses and show that the scheme can adaptively adjust the number of cooperating relays, and outperform conventional relay selection schemes. Hence, the proposed scheme provides better tradeoff between BER performance and spectral efficiency and to save more energy in cooperative wireless networks.

• Journal of Society of Preventive Korean Medicine
• /
• v.10 no.2
• /
• pp.95-120
• /
• 2006

The purpose of this paper is to investigate the structure of cost-sharing for oriental medical services in the national health insurance. Out-of-pocket payment in ambulatory oriental medical care is a co-payment of KRW3,000 up to total expenses of KRW15,000, and co-insurance rate of 30% thereafetr. The empirical analysis based on medial claims data shows that the frequency of medical claims for outpatient care are mostly concentrated just below a total expenses of KRW15,000, and it decreases beyond a total expense of KRW15,000, while it rebounds between KRW17,000${\sim}$20,000. This means the current co-payment(KRW3,000) in oriental medical services should be applied up to a total payment of KRW17,000${\sim}$20,000, or the level of co-payment should be adjusted upward to KRW45,000 in order to be consistent in cost-sharing, between co-payment and co-insurance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.6
• /
• pp.1230-1237
• /
• 2009

In this paper, we develop a design methodology of Granular-based Radial Basis Function Neural Networks(GRBFNN) by context-based clustering. In contrast with the plethora of existing approaches, here we promote a development strategy in which a topology of the network is predominantly based upon a collection of information granules formed on a basis of available experimental data. The output space is granulated making use of the K-Means clustering while the input space is clustered with the aid of a so-called context-based fuzzy clustering. The number of information granules produced for each context is adjusted so that we satisfy a certain reconstructability criterion that helps us minimize an error between the original data and the ones resulting from their reconstruction involving prototypes of the clusters and the corresponding membership values. In contrast to "standard" Radial Basis Function neural networks, the output neuron of the network exhibits a certain functional nature as its connections are realized as local linear whose location is determined by the values of the context and the prototypes in the input space. The other parameters of these local functions are subject to further parametric optimization. Numeric examples involve some low dimensional synthetic data and selected data coming from the Machine Learning repository.

• 한국연소학회:학술대회논문집
• /
• 2004.06a
• /
• pp.235-241
• /
• 2004

Computations were performed to investigate the effects of air staging on combustion in three stage heavy-oil fired combustion burner. The burner was designed for 3 MW. Different amounts of air are introduced into each 3 three stages by means of each dampers. The goal of the study is to understand combustion phenomena according to each air stage mass ratios through CFD. Air flow rates at three inlets are adjusted by dampers inside a burner. Here, injection conditions of liquid fuel are kept constant throughout all simulations. This assumption is made in order to limit the complexity of oil combustion though it may cause some disagreement. In case of cold flows, only longitudinal velocities arc considered, On the other hand, flow, temperature and NOx generations are taken into account for reactive flows. Simple parametric study was conducted by setting 1'st air stage mass ratio as a parameter. And an optimal operation condition was found. The computational study is based on k-e model, P-1 radiation model(WSGGM) and PDF, and is implemented on a commercial code, FLUENT.

• Journal of Power Electronics
• /
• v.12 no.4
• /
• pp.677-688
• /
• 2012

The vibratory conveyors with electromagnetic drive are used for performing gravimetric flow of granular materials in processing industry. By realizing free vibrations of variable intensity and frequency over a wide range through application of the electromagnetic actuator, suitable power converter, and the corresponding controller, continuous conveyance of granular materials have been provided for various operating conditions. Standard power output stages intended for control of vibratory conveyance using thyristors and triacs. Phase angle control can only accomplish tuning of amplitude oscillations, but oscillation frequency cannot be adjusted by these converters. Application of current controlled transistor converters enables accomplishing the amplitude and/or frequency control. Their use implies the excitation of a vibratory conveyor independent of the supply network frequency. In addition, the frequency control ensures operation in the region of mechanical resonance. Operation in this region is favourable from the energy point of view, since it requires minimal energy consumption. The paper presents a possible solution and advantages of the amplitude-frequency control of vibratory conveyors by means of a current controlled power converter.

• Journal of Adhesion and Interface
• /
• v.7 no.4
• /
• pp.28-31
• /
• 2006

Due to the miniaturization of MEMS and microelectronics the joining techniques also have to be adjusted. The dosing technology with viscous adhesives does not permit reproducible adhesive volumes, which are clearly under a nano-liter. A nano-liter means however a diameter of bonding area within the range of several 100 micrometers. Additional, viscous adhesives need a certain time, until they are cross linked or cured. The problem especially in the MEMS is the initial strength, since it gives the time, which is needed for joining an individual adhesive joint. The time up to the initial strength is with viscous, also with fast curing systems, within the range of seconds until minutes. Until the reach of the initial strength, the micro part must be fixed/held. Without sufficient adjustment/clamping it can come to a shift of the micro parts. Also existing micro adhesive bonding processes are not batch able, i.e. the individual adhesive joints of a micro system must be processed successively. In the context of the WCARP III 2006 now an innovative method is to be presented, how it is possible to solve the existing problems with micro bonding. i.e. a method is presented, which is batch able, possess a minimum joining geometry with some micrometers and is so fast that no problems with the initial strength arise. It is a method, which could revolutionize the sticking technology in the micro system engineering.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.3
• /
• pp.187-196
• /
• 2011

Generally, BOM (Bill of Material) means a part list which is needed to manufacture or assemble a product or part. During manufacturing processes, BOM is inevitably required for most of enterprise processes such as design, procurement, production planning/control, resource planning, and financial works. Every manufacturing industry uses many kinds of BOM's that are adjusted to the requirement of functions of their work division. Moreover, BOM evolves in different forms according to the product development phases such as conceptual design; function design, detail design, and production design because it is necessary to use different product structures to keep product data generated throughout the lifecycle of a product. This includes all data and information related to the all the product development phases. Shipbuilding works also are processed and controlled based on BOM. However, effective maintenance of ship outfitting BOM data is getting difficult as the amount and complexity of data have increased due to variety and long lifecycle of ship. For the effective management of outfitting BOM data, two aspects must be considered. One is how to classify numerous BOMs type and the others how to display BOMs. So this study suggests a method to classify BOM types and propose two categories - Structure BOM, Display BOM. Base on this result, we propose the integrated ship outfitting BOMs model and analysis outfitting BOMs.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.19 no.4
• /
• pp.425-433
• /
• 2012

Purpose: The purpose of this study was to investigate sleep patterns and predictors of excessive daytime sleepiness (EDS) in university students. Methods: Participants were 120 university students who were attending two universities in S-city and C-city. Data were collected from May 20 to June 15, 2012 using self-report questionnaires which included Johns' Epworth Sleepiness Scale, Yi's Sleep Quality Scale, and Beck Depression Inventory. Data were digitalized and analyzed using frequency, percentages, means and standard deviations, Wilcoxon rank sum test, Chi-square test, Fisher's exact test, and multiple logistic regression with SAS 9.0. Results: Mean total sleep time was 6.6 hours on weekdays, 8.1 hours on weekends. Mean sleep latency was 19.1 minutes and the score for mean sleep quality was 22.6. Prevalence of EDS was 12.5%. Depression was significantly different between EDS and Non-EDS students (t=2.17, p=.030). Multiple logistic regression showed that the only factor associated with EDS was depression (adjusted odds ratio of depression=5.33, 95% Confidence Interval=1.49-19.04). Conclusion: Results of this study indicate that university students experience short sleep time, low sleep quality, and common EDS with depression, suggesting that students with complaints of EDS should be completely assessed for depression as well as sleep problems.

• Journal of Forest and Environmental Science
• /
• v.34 no.2
• /
• pp.119-125
• /
• 2018

The tropical forests in developing countries are faced with the problem of illegal exploitation of trees. However, dearth of empirical means of expressing the dimensions, structure, quality and quantity of a removed tree has imped conviction of offenders. This study aimed at developing a model that can effectively estimate individual tree basal area (BA) from stump diameter (Ds) for Tectona grandis stands in Omo Forest Reserve, Nigeria, for timber valuation in case of illegal felling. Thirty-six $25m{\times}25m$ temporary sample plots (TSPs) were laid randomly in six age strata; 26, 23, 22, 16, 14, and 12 years specifically. BA, Ds and diameter at breast height were measured in all living T. grandis trees within the 36 TSPs. Least square method was used to convert the counted stumps into harvested stem cross-sectional areas. Six basal area models were fitted and evaluated. The BA-Ds relationship was best described by power model which gave least values of Root mean square error (0.0048), prediction error sum of squares (0.0325) and Akaike information criterion (-15391) with a high adjusted coefficient of determination (0.921). This study revealed that basal area estimation was realistic even when the only information available was stump diameter. The power model was validated using independent data obtained from additional plots and was found to be appropriate for estimating the basal area of Tectona grandis stands in Omo Forest Reserve, Nigeria.

• Journal of Acupuncture Research
• /
• v.22 no.5
• /
• pp.161-166
• /
• 2005

The Foot drop is led by the conditional palsy of dorsal flexor according to some causes. In this case, it is caused by peroneal nerve palsy. It brings the difficulty in waking and standing up. We observed 2 cases of patient with Foot drop. Two patients were treated by the same method and treatment was performed by means of electroacupuncture(2-4Hz frequency, intensity was adjusted so that localized muscle contraction could be seen). As the result, symptoms are improved.