• 설비공학논문집
• /
• 제18권6호
• /
• pp.509-517
• /
• 2006

Present study is concerned with an experimental study on the cooling characteristics of heat-generating components arranged in channels which are made by printed circuit boards. To estimate the thermal performance of the heat-generating components arranged by $5\times11$ in channel flow, three variables are used: the inlet velocity, the height of channel, and row number of the component. The cooling characteristics of the heat-generating components such as the surface temperature rise, the adiabatic temperature rise, the adiabatic heat transfer coefficient, and the effect of thermal wake are compared with the result of the experiment and the numerical analysis. The experimental result is in a good agreement with the numerical analysis. The heat transfer coefficient increases as the Reynolds number increases, while the thermal wake function calculated for each row decreases as the Reynolds number increases. In addition, it is found that Nu-Re correlation equation is Identical to the previous studies, and the empirical correlation equation between the thermal wake function and Re is presented.

• 대한기계학회논문집B
• /
• 제25권8호
• /
• pp.1131-1139
• /
• 2001

Experimental results are presented, which describe the effect of blowing ratio on film cooling from two rows of holes with opposite orientation angles. The inclination angle is fixed at 35°, and the orientation angles are set to be 45°for the downstream row, and -45°for the upstream row. The studied blowing ratios are 0.5, 1.0 and 2.0. The boundary layer temperature distributions are measured using thermocouple at two downstream locations. Detailed adiabatic film cooling effectiveness and heat transfer coefficient distributions are measured with TLC(Thermochromic Liquid Crystal). The adiabatic film cooling effectiveness and heat transfer coefficient distributions are discussed in connection with the injectant behaviors inferred from the boundary layer temperature distributions. Film cooling performance, represented by heat flux is evaluated from the adiabatic film cooling effectiveness and heat transfer coefficient data. The results show that the investigated geometry provides improved film cooling performance at the high blowing ratios of 1.0 and 2.0.

• 소성∙가공
• /
• 제32권4호
• /
• pp.215-220
• /
• 2023

In this study, the correction process of stress-strain curves obtained from hot compression test is introduced since the barreling induced by friction and adiabatic heat generation induced by plastic work occur under high strain rate. A shear friction factor was quantitatively estimated by measuring the dimension of barreling and temperature rise due to adiabatic heat generation was directly measured during compression test. Thereafter, the stress-strain curves were re-evaluated by introducing several equations to correct the effects of the friction and temperature rise. It was found that adiabatic factor at strain rate of 10/s is in the range of about 0.5 to 0.75 for Nimonic 80A and decreases as the assigned temperature increases.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.309-310
• /
• 2010

본 연구에서는 플라이애시를 대량 사용한 콘크리트의 기초 물성 및 단열온도상승 특성에 대하여 검토하였다. 이를 위하여 플라이애시를 시멘트량에 대하여 40% 및 50% 사용한 콘크리트 배합에 대하여 슬럼프, 공기량, 블리딩, 압축강도 및 단열온도상승 시험을 실시하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.117-118
• /
• 2022

In this study, adiabatic temperature rise of concrete depending on binder compositions and CGS contents is studied to provide informations for CGS low-heating aggregate and mixture designs for upper and lower placement lifts. Test nresults indicate that it is desirable to apply the combination of binders between top and bottom lift. For top lift, SESC or ESC is recommended, and for bottom lift, FAC+CGS 50 % is good for material composition.

• 태양에너지
• /
• 제17권2호
• /
• pp.75-89
• /
• 1997

동적형(Dynamic type) 빙축열시스템의 빙축열조에서 단열조건과 비단열조건인 경우 각각 얼음충진율(Ice Packing Factor), 분산유체의 온도 및 유량의 변화에 따른 실험을 수행하였다. 실험시간이 경과함에 따라 빙축열조의 수직방향으로 온도성층화가 나타났으며 분산유체의 유입온도가 높고 유입유량이 많을수록 상부영역에서 온도분포는 크게 변화하였고 온도성층화에 도달하는 시간도 단축되었다. 또한 얼음충진율이 작은 경우가 온도성층화를 이루는 시간이 짧았고 상하부 온도차가 급격히 커진 것 알 수 있었다. 그리고 단열의 경우가 비단열의 경우보다 모든 조건하에서 조금 높은 온도분포를 나타내었으며 온도성층화에 소요되는 시간도 조금 단축되었다. 빙축열조내의 수직방향의 평균온도 상승은 얼음충진율이 낮고 유량이 많을수록 커졌으며 총방열에너지에 대한 잠열에너지의 비($E_{\lambda}/E_[tot}$)는 약 80%정도로 나타났다. 또한 유입온도가 높고 유량이 많을수록 잠열에너지의 방출이 빨리 나타났다.

• 콘크리트학회논문집
• /
• 제24권6호
• /
• pp.659-666
• /
• 2012

최근 대형 매스콘크리트 구조물의 온도균열 저감을 위해 저열 포틀랜드시멘트(LPC), 삼성분계 저발열시멘트(TBC) 및 조강형저발열시멘트(EBC)에 대한 다양한 연구와 현장적용이 이루어지고 있다. 콘크리트 구조물의 온도균열검토를 위해서는 단열온도 예측모델이 필수적이지만, 아직 많은 종류의 배합에 대한 자료가 축적되어 있지 않으며, 단열온도 상승 시험체의 용적에 따른 결과 차이가 보고되고 있다. 따라서 이 연구에서는 결합재 종류 및 단열 시험체 용적에 따른 단열온도 상승시험을 수행하고 배합별 최대 단열온도 상승양과 반응계수를 분석 제시하였다. 실험 결과, TBC 배합의 최대 단열온도 상승양($Q_{\infty}$) 및 반응계수(r)가 가장 작은 것으로 나타났다. 또한 단열 시험체 용적에 따라 $Q_{\infty}$과 r가 다르게 나타났으며, 50 l 시험체에 의한 측정 결과가 60 l보다 일정하게 높은 상관관계를 나타냈다. 이상의 상관관계를 이용하면, 6 l 시험체에 의한 결과로 50 l 시험체의 단열온도 상승양을 예측할 수 있어 현장 콘크리트 품질관리 및 기초연구단계에서 활용할 수 있을 것으로 판단된다.

• 한국가시화정보학회지
• /
• 제3권1호
• /
• pp.90-96
• /
• 2005

Most of the previous studies on natural convection were based on the numerical analysis, and some experimental studies considered the classic case of thermal convection. In this study, an adiabatic square body was located at the center of an enclosure between the bottom hot and top cold walls. And the measurement of the detailed temperature fields was conducted by the method of two-color Laser Induced Fluorescence using a Nd:Yag laser. As a result, heat transfer characteristics of natural convection with an adiabatic body was estimated as a function of time over a range of Rayleigh numbers.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 추계학술대회 논문집
• /
• pp.104-107
• /
• 2004

Most of the previous studies on natural convection were based on the numerical analysis, and some experimental studies considered the classic case of thermal convection. In this study, an adiabatic square body was located at the center of an enclosure between the bottom hot and top cold walls. And the measurement of the detailed temperature fields was conducted by the method of two-color Laser Induced Fluorescence using a Nd:Yag laser. As a result, heat transfer characteristics of natural convection with an adiabatic body was estimated as a function of time over a range of Rayleigh numbers.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.769-774
• /
• 2003

In this paper, the performance of a domestic Kim-Chi refrigerator is predicted by using a calculation model & experiment. The objectives of this study are to find out the best design points of a refrigeration system and calculate an adiabatic characteristic to change outdoor temperature. The best design points such as refrigerant charge and capillary length were experimentally investigated. And the calculation model is conducted as a function of calculation parameters and outdoor temperature. According to this study results, the best design points of a refrigeration system are each 95g of a refrigerant charge and 3500/3500mm of capillary lengths. And the power consumption is 13.578 Kwh/month. And a part of the worst heat loss is a front side of a domestic Kim-Chi refrigerator body.